Skip to the content
PCBKitNew board

Zx spectrum

59 boards

KiCad boards from 21 GitHub repositories tagged “zx-spectrum”, the most starred first; open any of them in PCBKit.

  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 4 layers65 × 30 mmSizif xxs, the printed circuit board in 3D

    Sizif xxs

    UzixLS/zx-sizif-xxs

    Smallest ZX Spectrum clone with real Z80 and FPGA

    90 parts50MIT
  • 2 layers170 × 64 mmZx multisound, the printed circuit board in 3D

    Zx multisound

    UzixLS/zx-multisound

    ZX Spectrum soundcard for NEMOBUS/ZXBUS

    200 parts40MIT
  • 2 layers140 × 85 mmSizif128, the printed circuit board in 3D

    Sizif128

    UzixLS/zx-sizif-128

    Easy-to-build minimalistic ZX Spectrum clone

    112 parts34MIT
  • 2 layers118.1 × 99.9 mmZX Interface 2021, the printed circuit board in 3D

    ZX Interface 2021

    tebl/ZX-Interface-2.021

    An old-school remake of the ZX Interface 2 with some modern tweaks - mainly by integrating bank switching into the interface itself.

    58 parts32
  • 2 layers99.7 × 64.1 mm8bitWave Module, the printed circuit board in 3D

    8bitWave Module

    tebl/8BIT-Wave

    An Arduino-based tape player for old school computers like the ZX Spectrum, Dragon 32 etc. Hardware is compatible with tzxduino/arduitape and Maxduino firmware.

    55 parts31
  • 2 layers99.7 × 74.9 mmC64 Joykey 2040, the printed circuit board in 3D

    C64 Joykey 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    69 parts27
  • 2 layers100 × 100 mmZxevo1010 main, the printed circuit board in 3D

    Zxevo1010 main

    UzixLS/zxevo1010-board

    10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure

    252 parts26
  • 2 layers99.1 × 99.1 mmPlusd, the printed circuit board in 3D

    Plusd

    alvaroalea/plusD-clone

    Schematic of a clone of the Disk Interface +D for the ZX Spectrum

    69 parts25
  • 2 layers100 × 100 mmZxuno1010, the printed circuit board in 3D

    Zxuno1010

    UzixLS/zxuno1010-board

    10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure

    233 parts23MIT
  • 2 layers83 × 39.5 mmZx tsid, the printed circuit board in 3D

    Zx tsid

    UzixLS/zx-tsid

    MOS SID sound card for ZX Spectrum

    79 parts22MIT
  • 2 layers99.1 × 40 mmZX BUS Mouse, the printed circuit board in 3D

    ZX BUS Mouse

    proboterror/ZX_BUS_Mouse

    ZX BUS Kempston Mouse Controller

    31 parts18
  • 2 layers99.1 × 99.1 mmOpusdiscovery, the printed circuit board in 3D

    Opusdiscovery

    alvaroalea/opusdiscovery-clone

    59 parts11GPL-3.0
  • 2 layers213 × 130 mmMax48 ISSUE4, the printed circuit board in 3D

    Max48 ISSUE4

    alvaroalea/all-spectrum-clones

    Schematic of a 8bit computer, clone of Sinclair ZX Spectrum

    186 parts10
  • 2 layers187.3 × 109.5 mmZ80RP2350b, the printed circuit board in 3D

    Z80RP2350b

    kysilv/z80-rp2350b-zx-compatible

    Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA

    131 parts9GPL-3.0
  • 2 layers99.7 × 149.9 mmBeta128 r0.3, the printed circuit board in 3D

    Beta128 r0.3

    alvaroalea/betadisk-clone

    Clone of the Beta 128 Disk Interface for ZX Spectrum

    89 parts7
  • 2 layers75.9 × 66 mmZx talker, the printed circuit board in 3D

    Zx talker

    zxinfo-diy-electronics/zx-talkman

    DIY Speech Interface for ZX Spectrum & ZX81 published in Ny Elektronik 1984 issue 10 page 36

    34 parts4
  • 2 layers76.6 × 57.4 mmDivtiesus acer, the printed circuit board in 3D

    Divtiesus acer

    arleybls/divtiesus-acer

    Custom 2-layer PCB re-layout of DivTIESUS — a DivMMC SD card interface for the ZX Spectrum, with the upstream CPLD firmware unchanged.

    42 parts3
  • 2 layers256.3 × 109.5 mmZx cherry keyboard, the printed circuit board in 3D

    Zx cherry keyboard

    guntars-lemps/ZX-Cherry

    ZX Cherry keyboard

    117 parts1GPL-3.0
  • 2 layers20.8 × 34.8 mmCarrier, the printed circuit board in 3D

    Carrier

    5haman/especcy

    Thumb-sized ESP32 ZX Spectrum handheld, 24 × 38 × 12 mm: FreeCAD enclosure, KiCad carrier study and cycle-timed 48K emulator firmware.

    21 partsGPL-3.0
  • 4 layers78.7 × 66 mmTkmem128-ii, the printed circuit board in 3D

    Tkmem128-ii

    lrrosa/tkmem128-ii

    TKMEM-128 II — expansão de 128K/512K paginados (padrão ZX Spectrum 128) para TK90X, TK95 e ZX Spectrum 48K, redesenhada em KiCad. Derivada do projeto do Velesoft (2009) e da TKMEM-128 da Luccas Eletrônica (2012).

    22 partsCERN-OHL-S-2.0
  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    206 parts195MIT
  • 2 layers213 × 65 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    186 parts195MIT
  • 2 layers213 × 65 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    186 parts195MIT