Skip to the content
PCBKitNew board

Retrocomputing

223 boards

KiCad boards from 113 GitHub repositories tagged “retrocomputing”, the most starred first; open any of them in PCBKit.

  • 2 layers99.1 × 99.1 mmRC1802 CPU, the printed circuit board in 3D

    RC1802 CPU

    tebl/RC1802-Cosmac-ELF

    With the RC6502-project for making an Apple 1 replica done I wanted to do something different, so I started designing a simple version of the RCA 1802-based Cosmac ELF instead.

    54 parts31GPL-3.0
  • 2 layers25.1 × 52.3 mmOpenAmigaDriveSwitcher, the printed circuit board in 3D

    OpenAmigaDriveSwitcher

    SukkoPera/OpenAmigaDriveSwitcher

    Open Hardware Floppy Drive Swapper for Amiga Computers

    10 parts29
  • 2 layers58.4 × 50.8 mmOpenC64KernalCart, the printed circuit board in 3D

    OpenC64KernalCart

    SukkoPera/OpenC64KernalCart

    Open Hardware Multi-KERNAL Cartridge for the Commodore 64

    13 parts29
  • 4 layers108 × 35.8 mmSIMM72BL, the printed circuit board in 3D

    SIMM72BL

    demik/oldworld

    Development ressources for Old World Macintosh (68k and NuBus PPC) and a few related things…

    135 parts27CERN-OHL-P-2.0
  • 2 layers111.6 × 37.5 mmOpenAmiga2000CoproAdapter, the printed circuit board in 3D

    OpenAmiga2000CoproAdapter

    SukkoPera/OpenAmiga2000CoproAdapter

    Move your Amiga 2000 CPU to the Coprocessor slot!

    19 parts27
  • 2 layers28.2 × 28.2 mmOpenAmigaMouseTrigger, the printed circuit board in 3D

    OpenAmigaMouseTrigger

    SukkoPera/OpenAmigaMouseTrigger

    Control Amiga add-on boards through mouse buttons

    11 parts27
  • 2 layers65.3 × 63 mmMsx konami mapper, the printed circuit board in 3D

    Msx konami mapper

    barbeque/oyanami-msx-megarom

    non-SCC MegaROM mapper for MSX

    11 parts25GPL-3.0
  • 2 layers131.1 × 108 mmISA EGA CHIPS, the printed circuit board in 3D

    ISA EGA CHIPS

    hkzlab/ISA_EGA_CHIPS

    This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).

    68 parts24
  • 2 layers249.6 × 78.7 mmApple II Prototype, the printed circuit board in 3D

    Apple II Prototype

    tebl/Apple2-Prototyping-Card

    Prototyping card for developing new hardware for legacy Apple ][, //e and //gs computers.

    99 parts23
  • 2 layers127 × 73.7 mmRetroZ SBC, the printed circuit board in 3D

    RetroZ SBC

    formix/RetroZ

    An S80 Single Board Retro Computer

    60 parts22Apache-2.0
  • 2 layers84 × 88 mmMacSnap SCSI, the printed circuit board in 3D

    MacSnap SCSI

    demik/MacSnap-SCSI

    SCSI interface by Dove Computer Corporation for Macintosh 512Ke

    34 parts20CERN-OHL-P-2.0
  • 2 layers38.1 × 38.1 mm386 adapter, the printed circuit board in 3D

    386 adapter

    hkzlab/386DX_QFP_PGA_Adapter

    A QFP -> PGA adapter for 386DX CPUs

    4 parts20CC-BY-SA-4.0
  • 2 layers34 × 23.4 mmDWAVE, the printed circuit board in 3D

    DWAVE

    hkzlab/DWAVE_MIDI_Wavetable

    DWAVE is a small General MIDI module for the wavetable connector of your old sound card, based on the SAM2695 chip

    28 parts20
  • 4 layers47 × 62.2 mmTTL2ANALOG, the printed circuit board in 3D

    TTL2ANALOG

    hkzlab/TTL-to-RGB

    This board converts CGA/EGA/MDA/Hercules TTL signals into analog RGB signals that can be fed into a compatible monitor

    33 parts20
  • 2 layers299.7 × 251.3 mmExtender 72pin, the printed circuit board in 3D

    Extender 72pin

    MattisLind/DP2200

    Datapoint 2200

    74 parts19Apache-2.0
  • 2 layers65 × 100 mmNascom sd, the printed circuit board in 3D

    Nascom sd

    nealcrook/nascom

    Software, utilities and documentation for the Z80-based NASCOM2 computer

    23 parts19
  • 2 layers99.1 × 49.9 mmGameControl, the printed circuit board in 3D

    GameControl

    jblang/GameController

    Game Controller interface for RC2014

    53 parts18
  • 2 layers20.5 × 37.7 mm82S1xx W27C512 Adapter, the printed circuit board in 3D

    82S1xx W27C512 Adapter

    SukkoPera/OldPromAdapter

    Replace 82s126/82s129/82s131 PROMs with (E)EPROMs

    5 parts18
  • 2 layers52 × 45 mmOpenC16RamExpansion, the printed circuit board in 3D

    OpenC16RamExpansion

    SukkoPera/OpenC16RamExpansion

    Open Hardware 64 Kb RAM Expansion for the Commodore 16

    21 parts16
  • 2 layers100 × 100 mm1551-III Pico, the printed circuit board in 3D

    1551-III Pico

    ytmytm/1551-rePico

    Commodore 1551 disk-drive replacement for Plus/4, C16 and C116: Pico2 + 6510T + CPLD in a Pi1551-III case, host via tcbm2sd. Firmware/GCR derived from 1541-rePico.

    80 parts16GPL-3.0
  • 2 layers74.3 × 43.8 mmTurboXT, the printed circuit board in 3D

    TurboXT

    hkzlab/TurboXT_Addon

    8Mhz Turbo / Reset addon board for the IBM 5160 (The original XT)

    28 parts15
  • 2 layers209 × 98 mmX68000-pro picopsu pcb, the printed circuit board in 3D

    X68000-pro picopsu pcb

    leaded-solder/x68000-pro-picopsu

    Adapter to use PicoPSU power supplies in a Sharp X68000 PRO computer

    23 parts15GPL-3.0
  • 2 layers60.8 × 99.9 mmReSeed, the printed circuit board in 3D

    ReSeed

    SukkoPera/ReSeed

    Sounds from C64 now for Plus/4!

    59 parts15