Skip to the content
PCBKitNew board

Qwiic

18 boards

KiCad boards from 12 GitHub repositories tagged “qwiic”, the most starred first; open any of them in PCBKit.

  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers105.4 × 107.9 mmUltimate adafruit macropad baseboard, the printed circuit board in 3D

    Ultimate adafruit macropad baseboard

    Fescron/Ultimate_Adafruit_MacroPad

    An upgraded Adafruit Macropad with easier macro-layer-switching using additional NeoKey buttons (and OLED display). Also includes keyboard-layout switching and dimming as well as a lot of macro-definitions.

    17 parts5MIT
  • 2 layers23.5 × 46 mmS1-popout board, the printed circuit board in 3D

    S1-popout board

    siliconwitchery/s1-popout-board

    Breakout development board for the S1 Module

    18 parts5CERN-OHL-P-2.0
  • 2 layers21.6 × 25.4 mmByteSizedEncoderDecoder, the printed circuit board in 3D

    ByteSizedEncoderDecoder

    RCMgames/BSED

    Byte Sized Encoder Decoder - Reads 8 quadrature encoders and communicates over I2C (and is qwiic compatible).

    17 parts3MIT
  • 2 layers142.7 × 194.5 mmSparkFun STC31 panelized, the printed circuit board in 3D

    SparkFun STC31 panelized

    sparkfun/SparkFun_CO2_Sensor-STC31

    A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.

    2,002 parts3
  • 2 layers116.8 × 168.6 mmSparkFun AS7343 Qwiic panelized, the printed circuit board in 3D

    SparkFun AS7343 Qwiic panelized

    sparkfun/SparkFun_Spectral_Sensor_Breakout_AS7343_Qwiic

    Qwiic Breakout for the 14-channel Multi-Spectral Sensor AS7343 from AMS.

    1,519 parts2
  • 2 layers25.4 × 20.3 mmSht45-qt, the printed circuit board in 3D

    Sht45-qt

    FrancoSpitale/sht45-qt

    SHT45 temperature/humidity breakout, Qwiic/STEMMA QT compatible — KiCad 9, open hardware (MIT)

    10 parts1MIT
  • 4 layers92 × 88 mmIOT, the printed circuit board in 3D

    IOT

    Habib-creater/ESP32-IoT-Monitoring-Control-Board

    4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.

    63 parts1
  • 2 layers43.2 × 58.4 mmAfdDriver, the printed circuit board in 3D

    AfdDriver

    jduanen/alienFontDisplay

    Display made of six eight-segment EL display units

    58 parts1MIT
  • 2 layers25.4 × 25.4 mmSparkFun VEML7700, the printed circuit board in 3D

    SparkFun VEML7700

    sparkfun/SparkFun_Ambient_Light_Sensor-VEML7700

    A Qwiic breakout for the VEML7700 ambient light sensor

    43 parts
  • 4 layers132.2 × 188.4 mmSparkFun IoT Node LoRaWAN panelized, the printed circuit board in 3D

    SparkFun IoT Node LoRaWAN panelized

    sparkfun/SparkFun_IoT_Node_LoRaWAN

    Hardware Repository for the SparkFun IoT Node - LoRaWAN Development board

    971 parts
  • 2 layers25.4 × 25.4 mmSparkFun STC31, the printed circuit board in 3D

    SparkFun STC31

    sparkfun/SparkFun_CO2_Sensor-STC31

    A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.

    58 parts3
  • 2 layers82.5 × 44.5 mmSparkFun Indoor Air Quality Sensor - SCD41 SEN55, the printed circuit board in 3D

    SparkFun Indoor Air Quality Sensor - SCD41 SEN55

    sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55

    An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.

    58 parts3
  • 2 layers25.4 × 25.4 mmSparkFun AS7343 Qwiic, the printed circuit board in 3D

    SparkFun AS7343 Qwiic

    sparkfun/SparkFun_Spectral_Sensor_Breakout_AS7343_Qwiic

    Qwiic Breakout for the 14-channel Multi-Spectral Sensor AS7343 from AMS.

    64 parts2
  • 2 layersAfd, the printed circuit board in 3D

    Afd

    jduanen/alienFontDisplay

    Display made of six eight-segment EL display units

    50 parts1MIT
  • 2 layers43.2 × 58.4 mmAfdDriver2Layer, the printed circuit board in 3D

    AfdDriver2Layer

    jduanen/alienFontDisplay

    Display made of six eight-segment EL display units

    53 parts1MIT
  • 4 layers59 × 79.5 mmSparkFun IoT Node LoRaWAN, the printed circuit board in 3D

    SparkFun IoT Node LoRaWAN

    sparkfun/SparkFun_IoT_Node_LoRaWAN

    Hardware Repository for the SparkFun IoT Node - LoRaWAN Development board

    242 parts