Micropython

87 boards

KiCad boards from 52 GitHub repositories tagged “micropython”, the most starred first; open any of them in PCBKit.

2 layers105.5 × 77.6 mm
BandSelector
n1kdo/BandSelector
IOT BandSelector (also known as a Band Decoder) works with Antenna Switch Controller to perform automated antenna selection on band change
63 parts3
2 layers112 × 70.5 mm
Macro Pad
Jpwaters09/Macro-Pad
A 12-key macro pad with a configurable rotary encoder and OLED display, built around the RP2354A microcontroller and custom MicroPython firmware. Fully programmable through a web-based configurator.
50 parts2MIT
2 layers90.2 × 66.5 mm
PyControl DSeries
Karpova-Lab/pyControl-D-Series-Breakout
A breakout board for use with pyControl behavior control framework
17 parts2
2 layers100 × 100 mm
ClonadorDeSeñalesEsp32
LucasGarcia0924/Echo-Wave
Clonador de señales de 433mhz controlado en una app móvil
16 parts2
2 layers100 × 100 mm
Eda
tiesen243/rozumari
The system automatically opens the designated pill compartment at scheduled times, broadcasts audio reminders, and sends notifications to caregivers if the patient misses a dose or takes medication from the incorrect…
41 parts2Apache-2.0
2 layers108 × 150 mm
Numpad
20after4/macro-calculator
Custom USB Keyboard & Standalone Calculator written in MicroPython for the RP2350
54 parts1
2 layers
Geiger
ahnaf-tahmid-chowdhury/SmartGeiger
Development of background radiation monitoring with IoT based device
25 parts1Apache-2.0
2 layers78.7 × 94 mm
Brett
bskp/koebi
Robotic Puppeteering
65 parts1MIT
2 layers98 × 187 mm
Projet
FranklinBerger/Polonise-Inverse
Projet électronique de calculatrice en Polonaise Inversse. Bassée sur un ESP32 sur firmware MicroPython, elle a été initialement conçue dans le cadre d'un stage de découverte de l'électronique durant 1 mois.
137 parts1
2 layers57.2 × 53 mm
Bulbs
imjah/bulbs
Ambient lighting system
11 parts1GPL-3.0
2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1
2 layers94 × 55 mm
Contrib cal 2
Logan-Fouts/Contrib_Cal
A physical GitHub contribution calendar that brings your coding activity to life with LEDs. Built on the Raspberry Pi Pico W and programmable in MicroPython, this is an open-source project.
31 parts1
2 layers
Voice id
phastmike/IDx_hardware
The hardware information for the IDx project. Firmware on another repository (IDx)
22 parts1
2 layers110 × 50 mm
PyTrainer
profetolocka/pyTrainer
Kit educativo para aprender a programar en Micropython
44 parts1MIT
2 layers64.2 × 50 mm
Shroomgon
ramb0t/Shroomgon
Moon-themed Tildagon hexpansion app for the EMF badge (ESP32-S3) - 7x SK6812 LEDs, gyro-driven moon phase, auto-runs from an I2C EEPROM.
30 parts1MIT
2 layers32 × 79.7 mm
ThinkTankTimerVote
turfptax/uTalkTimer
uTalkTimer: An async ESPNOW-based MicroPython Device used for efficient discussion management in meetings, featuring speaker time tracking, speech queuing, and voting functionalities.
28 parts1MIT
2 layers20 × 20 mm
Tux mini v01
tux-friend/ESP32-Tux
Documentation for ESP32-Tux Dev Board
40 parts1GPL-3.0
2 layers87.2 × 81.7 mm
SIMACAS
ambadran/SIMACAS
Easy to install and remove, COMPLETE Irrigation and Plant Monitoring Solution with Smart IOT Control using myriad of sensors and an MPC Control Algorithm.
41 parts
2 layers100 × 50 mm
Smart cleaning robot
andrew-abdelmalak/smart-cleaning-robot
MicroPython firmware for a low-cost floor-cleaning robot on a Raspberry Pi Pico W, with BLE remote control, ultrasonic obstacle avoidance, and feed-forward plus PID wheel control. Bachelor thesis, GUC 2025.
8 partsMIT
2 layers60 × 40.1 mm
Photo table
art-of-electronics/photo_table
Hardware driver for photo table
19 partsGPL-3.0
2 layers75.4 × 53.3 mm
BE Elec Projet Type Kicad
AurelienCapron/autonomous-ir-projector-remote
Système embarqué autonome d'extinction automatique de vidéoprojecteurs : rétro-ingénierie infrarouge (protocole NEC 38 kHz), mode Sniffer d'apprentissage, fusion multi-capteurs (PIR, mmWave, son, VGA) et PCB sur mesure…
30 parts
2 layers
Gps gsm prj
bog739/gps_gsm_prj
Tracker project
16 parts
2 layers49.5 × 20.3 mm
RGT6 core module
FE3C61AD329B/RGT6
A minimal system runs MicroPython using STM32F405RGT6
75 parts
4 layers45.8 × 46.4 mm
Totem
ljagiello/totem-compass
Independent reverse-engineering documentation of the Totem Compass ESP32 + MicroPython firmware (v5.0.2): image/memory map, the 96 frozen modules, the 2.4 GHz protocols (BLE, ESP-NOW mesh, WiFi OTA), and a custom-client…
144 partsApache-2.0