2 layers34 × 33 mm
Nanro uno
rmingon/nanro-uno
A compact and breadboard-friendly development board featuring the ATmega88PA microcontroller, onboard MPU-6050 6-axis IMU, USB-to-serial interface (CH340C), and ISP header.
34 parts
Imu
46 boardsKiCad boards from 31 GitHub repositories tagged “imu”, the most starred first; open any of them in PCBKit.
- 4 layers64.1 × 50.5 mm
Flight controller version1
santhazsolt/stm32-based-quadcopter-drone
Custom STM32F411 quadcopter flight controller: KiCad PCB, embedded C, ICM-20948 IMU over SPI, quaternion complementary filter, PID attitude control.
81 partsMIT - 4 layers17.8 × 7.9 mm
- 4 layers80 × 80 mm
Bluepill QuadFC Carrier
SimulatedFlow/kicad-board-2026-07-29-bluepill-quad-fc
STM32 Bluepill quadcopter flight controller board - IMU, ESC headers and receiver input. Bare PCB, KiCad source files.
21 parts - 4 layers65 × 56 mm
RPi DroneRover HAT
SimulatedFlow/kicad-board-2026-07-29-rpi-drone-hat
Raspberry Pi drone HAT - carrier board with 4 ESC outputs and IMU for Raspberry Pi based multicopters. Solder kit, bare PCB, KiCad sources.
19 parts - 4 layers100 × 80 mm
Bluepill BrushedQuad Driver
SimulatedFlow/kicad-board-2026-07-30-bluepill-brushed-quad
STM32 Bluepill brushed quadcopter board - 4 MOSFET motor drivers and IMU for brushed micro drones. Solder kit, bare PCB, KiCad source files.
27 parts - 2 layers117.8 × 72.3 mm
Telematics device PCB
Yadnik1/Low-Cost-Telematics-Device
Developed a cost-effective telematics device for automobiles, capable of enabling user-based insurance models to save up to 30% on premiums.
21 parts - 4 layers51 × 21 mm
- 2 layers100 × 82.3 mm
Imu rc car
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
37 parts7MIT - 2 layers66 × 24 mm
Imu rc car encoders
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
23 parts7MIT - 2 layers33.4 × 29.2 mm
Imu rc car prox sensors
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
13 parts7MIT - 2 layers35 × 50 mm
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
73 parts7MIT - 2 layers44.5 × 50.8 mm
- 2 layers65 × 56 mm
AI4R PIHAT
pranavpai/Autonomous-RC-Car-AI-Project
Autonomous RC car with cone-based lane keeping, ToF obstacle avoidance, and software-in-the-loop simulation using ROS2
15 parts2MIT - 4 layers78.3 × 42.7 mm
IMU Array ICM-42688-P
thejamesrhodes/IMU-Quantisation-research-project
Research into quantisation effects in MEMS gyroscopes using custom STM32 hardware.
87 parts1MIT - 2 layers48 × 30 mm
Dongle
cUDGk/vrc-fbt-hardware
VRChat向けフルボディトラッキング基板 — ハブ+デイジーチェーン端末・数と位置を自由に変更可能・KiCad/OpenSCAD一式
18 parts - 2 layers32 × 29 mm
Node
cUDGk/vrc-fbt-hardware
VRChat向けフルボディトラッキング基板 — ハブ+デイジーチェーン端末・数と位置を自由に変更可能・KiCad/OpenSCAD一式
25 parts - 2 layers
Schematics
OsamaAlsahli/data-glove
Low cost 16 IMU data glove with real time hand tracking and fingertip force sensing. BEng final year project
5 parts - 2 layers
STOF sensor
OsamaAlsahli/data-glove
Low cost 16 IMU data glove with real time hand tracking and fingertip force sensing. BEng final year project
7 parts - 2 layers10 × 149.9 mm
STOF v3
OsamaAlsahli/data-glove
Low cost 16 IMU data glove with real time hand tracking and fingertip force sensing. BEng final year project
7 parts - 2 layers26.4 × 17.5 mm
SHT30 breakout
Yadnik1/Low-Cost-Telematics-Device
Developed a cost-effective telematics device for automobiles, capable of enabling user-based insurance models to save up to 30% on premiums.
6 parts - 2 layers23 × 20 mm
IMU breakout PCB
Yadnik1/Low-Cost-Telematics-Device
Developed a cost-effective telematics device for automobiles, capable of enabling user-based insurance models to save up to 30% on premiums.
6 parts