2 layers50.3 × 25.8 mm
I2C sensors
12 boardsKiCad boards from 12 GitHub repositories tagged “i2c-sensors”, the most starred first; open any of them in PCBKit.
- 2 layers30 × 15 mm
TFHT01
ThunderFly-aerospace/TFHT01
Airborne Humidity and Temperature sensor for UAVs.
34 parts10GPL-3.0 - 2 layers25 × 23 mm
TFI2CADT01
ThunderFly-aerospace/TFI2CADT01
I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.
38 parts10GPL-3.0 - 2 layers37.5 × 19 mm
TFRPM01
ThunderFly-aerospace/TFRPM01
Revolutions per minute (RPM) meter for UAV, rotors, wheels and engines.
28 parts9GPL-3.0 - 2 layers25 × 15 mm
TFI2CEXT01
ThunderFly-aerospace/TFI2CEXT01
I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.
26 parts8GPL-3.0 - 2 layers30 × 15 mm
TFASPDIMU02
ThunderFly-aerospace/TFASPDIMU02
I²C bus differential pressure sensor with IMU and Magnetometer.
43 parts3GPL-3.0 - 2 layers41 × 20.3 mm
Bme280
fm4dd/pmod-bme280
PMOD module for the Bosch BME280 Temperature Humidity Pressure Sensor, connection over I2C.
14 parts2 - 2 layers20 × 20 mm
B TH09C Brk-01Mbr R01
Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board
TH09C Digital Temperature and Humidity Sensor Breakout Board for Accurate Environmental Monitoring via I2C Interface.
16 parts1CC-BY-SA-4.0 - 2 layers153.7 × 109.2 mm
I2c sensor breakout pcb
ImogenWren/i2c-arduino-daq
Arduino interface for i2c sensors with Serial CSV output for use with Data Aquisition Software
79 parts1 - 2 layers19.8 × 40.1 mm
GH4PIN01
mlab-modules/GH4PIN01
This 4-pin module connects JST-GH connectors, often used in Pixhawk drones, to standard pin headers, making it easier to build custom electronics and use I2C or CAN bus communication.
11 parts1GPL-3.0 - 4 layers
IR Thermometer
kamorrissey/pic-ir-thermometer
Open-source hardware and firmware for a PIC16LF19156-driven IR non-contact thermometer using a Melexis MLX90614 sensor and Lumex LCD-S401M16KR LCD segment display.
20 partsMIT - 2 layers30 × 40.1 mm
