2 layers100 × 100 mm
RecurBOY
cyberboy666/recurBOY
a rpi0 video-instrument – created in collaboration with Guergana Tzatchkova
35 parts122GPL-3.0
2 layers30 × 40.1 mm
I2CADC01
mlab-modules/I2CADC0124-bit analog to digital converter with I2C interface
- Size
- 30 × 40.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 14
- Pads
- 88
- Tracks, vias
- 143, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2023
- Updated
- 16 Jul 2024
Overview
I2CADC01 is an open-source printed circuit board by mlab-modules, from the mlab-modules/I2CADC01 repository on GitHub. It is a 2-layer board of 30 × 40.1 mm with 33 parts on 14 nets, routed with 143 tracks and 4 vias.
It is built around the BAT46. Its parts include 9 connectors, 8 capacitors, 6 resistors, 4 diodes and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdI2CADC01A - 24-bit ADC converter with I2C interface
The ADC includes a temperature sensor that can be used to compensate cold-junction temperature. Therefore, this module is suitable for use of temperature measurement by thermocouples.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Mlab_R:SMD-0805 | C1, C2, C4, C6, C7 |
| 4 | 10k | Mlab_R:SMD-0805 | R1, R2, R4, R5 |
| 4 | HOLE | Mlab_Mechanical:MountingHole_3mm | M1, M2, M3, M4 |
| 2 | 10uF | Mlab_R:SMD-0805 | C3, C5 |
| 2 | BAT46 | Mlab_D:MiniMELF_Standard | D2, D3 |
| 2 | CONN_2 | Mlab_Pin_Headers:Straight_2x01 | J3, J8 |
| 2 | JUMP2_2x1 | Mlab_Pin_Headers:Straight_2x01 | J5, J6 |
| 2 | _ | Mlab_Con:WAGO256 | P1, P2 |
| 1 | 0R | Mlab_R:SMD-0805 | R6 |
| 1 | 22nF | Mlab_R:SMD-0805 | C8 |
| 1 | 3K3 | Mlab_R:SMD-0805 | R3 |
| 1 | BLM21PG300SN1D | Mlab_R:SMD-0805 | L1 |
| 1 | CONN_3 | Mlab_Pin_Headers:Straight_1x03 | J4 |
| 1 | JUMP_3X2 | Mlab_Pin_Headers:Straight_2x03 | J1 |
| 1 | JUMP_5X2 | Mlab_Pin_Headers:Straight_2x05 | J7 |
| 1 | LM4041-adj | Mlab_IO:SOT-23 | D4 |
| 1 | LTC2485 | Housings_DFN_QFN:DFN-10-1EP_3x3mm_Pitch0.5mm | U1 |
| 1 | M4 | Mlab_D:SMA_Standard | D1 |
Questions
How big is the I2CADC01 PCB?
It measures 30 × 40.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the I2CADC01 use?
33 parts, built around the BAT46. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the I2CADC01 KiCad files?
From the mlab-modules/I2CADC01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/I2CADC01.kicad_pcb and its schematic hw/sch_pcb/I2CADC01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the I2CADC01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mlab-modules before reusing the design.
Similar boards
- 2 layers100 × 100 mm
Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design
78 parts52 - 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers74 × 34 mm
EMS Bus Gateway
mariusgreuel/EMS-Bus-Gateway
EMS Bus Gateway for Buderus Boilers to run EMS-ESP32
48 parts21GPL-3.0 - 2 layers100 × 100 mm
I n c u r
cyberboy666/i_n_c_u_r
a r_e_c_u_r video sampler extension circuit - adding knobs, cv and serial midi control
38 parts16GPL-3.0 - 4 layers128 × 184 mm
Cosmicpi 1.7
CosmicPi/CosmicPiV1.7PCB
PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2
219 parts14 - 2 layers38.1 × 109.2 mm
- 2 layers78 × 79 mm
