Skip to the content

Hardware designs

194 boards

KiCad boards from 92 GitHub repositories tagged “hardware-designs”, the most starred first; open any of them in PCBKit.

  • 2 layers150 × 97 mmController mega32l, the printed circuit board in 3D

    Controller mega32l

    dmogn/plc_controller_mega32l_pcb_scheme

    PLC controller hardware PCB scheme. ATMega32L, RS485 industrial bus interface, 8 ADC inputs, 8 PWM out, 6 GPIO

    82 parts7MIT
  • 4 layers17.5 × 51.3 mmMMU 3V3, the printed circuit board in 3D

    MMU 3V3

    frozen-signal/Apple_IIe_MMU_3V3

    Open source design files for the Apple IIe's MMU custom IC

    45 parts7CC-BY-4.0
  • 4 layers14 × 32.7 mmTwisted Listen Rev2, the printed circuit board in 3D

    Twisted Listen Rev2

    Triax-Labs/twisted

    The key chain sized expandable ESP32-S3 platform.

    56 parts7
  • 2 layers66.3 × 47.2 mmSmartMeter, the printed circuit board in 3D

    SmartMeter

    AvansETI/SmartMeter_DIY

    DSMR Smart Meter hardware for DIY enthousiasts.

    22 parts6MIT
  • 2 layers70 × 70 mmEV MAX V E64, the printed circuit board in 3D

    EV MAX V E64

    Gekkio/misc-hardware

    Miscellaneous/utility/convenience hardware by Gekkio

    34 parts6CC-BY-4.0
  • 4 layers51.6 × 44.4 mmLHCbit, the printed circuit board in 3D

    LHCbit

    lhc/Hardware

    Open Hardware respository from Laboratório Hacker de Campinas

    51 parts6
  • 4 layers130 × 90 mmFrequnecyCounter, the printed circuit board in 3D

    FrequnecyCounter

    LUMERIIX/FrequencyCounter

    FPGA based frequnecy counter hard- and software repository

    129 parts6
  • 2 layers22.9 × 61 mmAnavi soil moisture sensor, the printed circuit board in 3D

    Anavi soil moisture sensor

    AnaviTechnology/anavi-soil-moisture-sensor

    Open source hardware resistive soil moisture sensor

    9 parts5
  • 4 layers50 × 46 mmInternet radio speaker, the printed circuit board in 3D

    Internet radio speaker

    sini6a/internet-radio-speaker

    An open-source ESP32 Internet Radio Player with simple programming, USB charging, and on-the-go capability using a single-cell Li-ion battery.

    72 parts5GPL-3.0
  • 2 layers22.9 × 50.8 mmPh feather wing, the printed circuit board in 3D

    Ph feather wing

    iorodeo/ph_featherwing

    Design files for pH FeatherWing

    14 parts4CC-BY-4.0
  • 2 layers58.8 × 60.2 mmPower drive, the printed circuit board in 3D

    Power drive

    SourceLizi/F302-minimal

    STM32F302硬件设计

    121 parts4MIT
  • 2 layers56 × 91 mmBurstcart via, the printed circuit board in 3D

    Burstcart via

    ytmytm/plus4-burstcart

    Burst (fast serial) capable cartridge for Commodore C16/116/Plus4

    24 parts4
  • 4 layers50 × 70 mmRp569, the printed circuit board in 3D

    Rp569

    kelu124/rp569

    RP569 - PIOs to usb3 ( rp2350 x ch569 )

    146 parts3
  • 2 layers346.6 × 119.4 mmNetrazr rev2, the printed circuit board in 3D

    Netrazr rev2

    mantacid/NetRazr

    Cyberdeck Documentation and project files

    171 parts3
  • 2 layers80 × 75 mmPoolController, the printed circuit board in 3D

    PoolController

    marklynch/pool-controller-pcb

    PCB Design files for pool controller for Connect 10

    24 parts3CERN-OHL-P-2.0
  • 2 layers99.1 × 49.9 mmPPIDE, the printed circuit board in 3D

    PPIDE

    mattybigback/RC2014

    My RC2014 stuff

    19 parts3
  • 2 layers24.6 × 108 mmRavesaber, the printed circuit board in 3D

    Ravesaber

    Rave-Saber/Rave-Saber-Hardware

    Hardware Schematics for the RaveSaber Lightsaber.

    22 parts3
  • 2 layers87 × 62.2 mmPETRAMROM, the printed circuit board in 3D

    PETRAMROM

    rfalize/PETRAMROM

    PET RAM/ROM Replacement

    21 parts3
  • 4 layers151.1 × 71.1 mmMakeItRain, the printed circuit board in 3D

    MakeItRain

    TJLTM/MakeItRain

    DIY ESP-32 Based sprinkler Controller

    76 parts3
  • 2 layers68.8 × 68.1 mmSmartSensor, the printed circuit board in 3D

    SmartSensor

    AvansETI/SmartSensor

    SmartSensor: a sensor to be used as sensor and actuator within existing buildings.

    68 parts2GPL-3.0
  • 4 layers100 × 100 mmAFE, the printed circuit board in 3D

    AFE

    Blaze-Pascal/Masters-Multi-Channel_DAQ

    Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…

    216 parts2GPL-3.0
  • 4 layers86.5 × 42.1 mmZdberg, the printed circuit board in 3D

    Zdberg

    ematkkona/zdbrg

    EasyCommv2 -compatible antenna rotator platform

    39 parts2GPL-2.0
  • 2 layers68.6 × 53.3 mmArduino Compatible Board, the printed circuit board in 3D

    Arduino Compatible Board

    ercanersoy/Arduino-Compatible-Board

    Arduino Compatible Board for professional use

    48 parts2CC-BY-SA-4.0
  • 4 layers25.4 × 62.7 mmESP32 Board, the printed circuit board in 3D

    ESP32 Board

    Fred98246/ESP-32-Dev-Board

    Custom ESP32-S3-MINI-1 development board

    27 parts2MIT