Skip to the content
2 layers22.9 × 61 mmAnavi soil moisture sensor, the printed circuit board in 3D

Open source hardware resistive soil moisture sensor

Size
22.9 × 61 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
7
Pads
14
Tracks, vias
18, 41
Pours
4
Routed
Yes
KiCad
KiCad 4
Created
8 Apr 2017
Updated
30 Oct 2021

Overview

Anavi soil moisture sensor is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-soil-moisture-sensor repository on GitHub. It is a 2-layer board of 22.9 × 61 mm with 9 parts on 7 nets, routed with 18 tracks and 41 vias.

It is built around the BC817. Its parts include 3 connectors, 2 resistors and 1 transistor. It belongs with the sensors and measurement boards of this library.

Main components

1

README

README.md

ANAVI (Resistive) Soil Moisture Sensor

This is an open source hardware resistive soil moisture sensor.

Resistive soil moisture sensors have a lot of disadvantages and they are vulnerable to corrosion. It is higly recommended to use capacitive soil moisture sensor instead!

Story

This resistive soil moisture sensor was designed with the first prototype of ANAVI Gardening uHAT in 2017. After that, the project was put on hold for several years. In 2021 we revived ANAVI Gardening uHAT using Microchip MCP3002 analog-to-digital converter (ADC) and 3rd party low-cost capacitive soil-moisture sensors made of corrosion-resistant materials.

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

9
QtyValueFootprintReferences
2CONN_01X01Wire_Pads:SolderWirePad_single_0-8mmDrillP2, P3
1100RResistors_SMD:R_0603_HandSolderingR2
110KResistors_SMD:R_0603_HandSolderingR1
1BC817TO_SOT_Packages_SMD:SOT-23Q1
1CONN_01X03Pin_Headers:Pin_Header_Angled_1x03P1
1LOGOlogo:anavi-logoG***

The 7 most common of 9 parts.

Similar boards

  • 2 layers72 × 42 mmNRF24 jammer, the printed circuit board in 3D

    NRF24 jammer

    W0rthlessS0ul/nRF24_jammer

    The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

    51 parts1kMIT
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 2 layers87.9 × 98.7 mmBitdoglab smd, the printed circuit board in 3D

    Bitdoglab smd

    BitDogLab/BitDogLab

    Open-source educational hardware for embedded systems, programming, electronics, and physical computing.

    138 parts203
  • 2 layers77 × 100 mmBeamer1, the printed circuit board in 3D

    Beamer1

    shufps/diy-projector-clock

    DIY Projector Clock

    283 parts172
  • 2 layers84.2 × 52 mmPicoPico, the printed circuit board in 3D

    PicoPico

    DavidVentura/PicoPico

    Pico-8 Player

    57 parts141
  • 4 layers129 × 104.6 mmPC-1100X, the printed circuit board in 3D

    PC-1100X

    zscircuits/zs1100a

    All files hardware and software related to the zs1100a

    528 parts76

Questions

How big is the Anavi soil moisture sensor PCB?

It measures 22.9 × 61 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi soil moisture sensor use?

9 parts, built around the BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi soil moisture sensor KiCad files?

From the AnaviTechnology/anavi-soil-moisture-sensor repository on GitHub, at the commit this page was made from: the board is anavi-soil-moisture-sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi soil moisture sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.