Skip to the content

Firmware

299 boards

KiCad boards from 137 GitHub repositories tagged “firmware”, the most starred first; open any of them in PCBKit.

  • 2 layers69.5 × 119 mmBackplane, the printed circuit board in 3D

    Backplane

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    18 parts4
  • 2 layers69.5 × 62.6 mmCamera Module, the printed circuit board in 3D

    Camera Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    90 parts4
  • 4 layers69.5 × 62.6 mmCommunications Module, the printed circuit board in 3D

    Communications Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    77 parts4
  • 4 layers147.6 × 78.8 mmGS Mainboard, the printed circuit board in 3D

    GS Mainboard

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    154 parts4
  • 4 layers69.5 × 62.6 mmPower Module, the printed circuit board in 3D

    Power Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    131 parts4
  • 2 layers56 × 74 mmScrewSwitch, the printed circuit board in 3D

    ScrewSwitch

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    28 parts4
  • 2 layers144.5 × 56.5 mmENC nrf-301-02-REV04, the printed circuit board in 3D

    ENC nrf-301-02-REV04

    Yadnik1/Overhead-Crane-Control-System

    An efficient and reliable embedded system firmware for overhead crane applications. Developed using STM32G030C8T6 MCU, this project presents a specialized solution for encoder and decoder units, tailored to enhance the…

    139 parts4
  • 2 layers144 × 56.5 mmENC nrf-301-02-REV05, the printed circuit board in 3D

    ENC nrf-301-02-REV05

    Yadnik1/Overhead-Crane-Control-System

    An efficient and reliable embedded system firmware for overhead crane applications. Developed using STM32G030C8T6 MCU, this project presents a specialized solution for encoder and decoder units, tailored to enhance the…

    140 parts4
  • 2 layers48.3 × 48.3 mmLpc11 breakout, the printed circuit board in 3D

    Lpc11 breakout

    blinky101/blinky_lpc11uxx

    Blinky and tutorials for developing on the LPC11uxx platform

    24 parts3MIT
  • 2 layers48.3 × 66.7 mmLpc11 breakout panel, the printed circuit board in 3D

    Lpc11 breakout panel

    blinky101/blinky_lpc11uxx

    Blinky and tutorials for developing on the LPC11uxx platform

    32 parts3MIT
  • 2 layers66 × 53 mmLPC11Uxx dev board frame, the printed circuit board in 3D

    LPC11Uxx dev board frame

    blinky101/blinky_lpc11uxx

    Blinky and tutorials for developing on the LPC11uxx platform

    41 parts3MIT
  • 2 layers135 × 95 mmBahayshield ultra prototype 1, the printed circuit board in 3D

    Bahayshield ultra prototype 1

    cikeyz/bahayshield-ultra

    Offline flood and typhoon preparedness controller for Arduino Mega 2560 Pro: ultrasonic water level, BME280 pressure trend, TRI scoring, staged alerts, low-voltage relay cutoff.

    25 parts2MIT
  • 2 layers30 × 85.5 mmPower Deck Longitudinal v0.1, the printed circuit board in 3D

    Power Deck Longitudinal v0.1

    dgtaheno/RocketOS

    ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging

    8 parts2MIT
  • 2 layers100 × 70 mmBiltong board control deck, the printed circuit board in 3D

    Biltong board control deck

    myles-parfeniuk/biltong_board

    Sun drying emulation controller for biltong and other dried foodstuffs.

    32 parts2GPL-3.0
  • 2 layers68 × 51 mmEsp32-c6-carrier, the printed circuit board in 3D

    Esp32-c6-carrier

    paulmikael02/ESP32-BLDC-Motor-Controller

    ESP32-based BLDC motor controller built with ESP-IDF, utilizing Hall sensors and the hardware MCPWM peripheral.

    19 parts2
  • 2 layers69.5 × 62.6 mmDummy 24v board, the printed circuit board in 3D

    Dummy 24v board

    Queens-Rocket-Engineering-Team/av-prop

    QRET Avionics PCBs and firmware for integrating with the propulsion stack

    11 parts2
  • 2 layers17.5 × 30.5 mmHall effect board, the printed circuit board in 3D

    Hall effect board

    Queens-Rocket-Engineering-Team/av-prop

    QRET Avionics PCBs and firmware for integrating with the propulsion stack

    7 parts2
  • 2 layers77.6 × 85.7 mmARD POT LED, the printed circuit board in 3D

    ARD POT LED

    AssaadMH/mcu-sensor-firmware-studies

    A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

    3 parts1MIT
  • 2 layers34.3 × 32.9 mmMcu sensor firmware studies, the printed circuit board in 3D

    Mcu sensor firmware studies

    AssaadMH/mcu-sensor-firmware-studies

    A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

    7 parts1MIT
  • 2 layers39.4 × 45.7 mmTP2TRANS, the printed circuit board in 3D

    TP2TRANS

    AssaadMH/mcu-sensor-firmware-studies

    A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

    12 parts1MIT
  • 2 layers30.5 × 35.2 mmTRANSISTOR, the printed circuit board in 3D

    TRANSISTOR

    AssaadMH/mcu-sensor-firmware-studies

    A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.

    5 parts1MIT
  • 2 layers12V5VDCDC, the printed circuit board in 3D

    12V5VDCDC

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    11 parts1
  • 2 layers12V5VDCDC LDO, the printed circuit board in 3D

    12V5VDCDC LDO

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    15 parts1
  • 2 layers45 × 25 mmAnemoi, the printed circuit board in 3D

    Anemoi

    formicidae-tracker/hardware

    Hardware repository for the FORT system

    11 parts1