
Sensors Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

QRET Avionics hardware, firmware, and documentation for 2023 to 2025.
Communications Module is an open-source printed circuit board by Queens-Rocket-Engineering-Team, from the Queens-Rocket-Engineering-Team/Avionics-23-26 repository on GitHub. It is a 4-layer board of 69.5 × 62.6 mm with 77 parts on 112 nets, routed with 820 tracks and 289 vias.
It is built around the STM32F103CBT6, ISO1042BDWVR and LORA1262F30-868, with the TPM8837C-SO1R, W25Q128JVSIQ and AMS1117-3.3 among its other parts. Its parts include 27 capacitors, 16 resistors, 12 ICs, 6 diodes and 3 connectors. It belongs with the radio and wireless boards and the STM32 boards of this library.
All QRET avionics hardware and firmware has migrated to:
This repository is the working space for QRET's 2023-2026 Avionics systems. This includes both hardware design and firmware projects.
If you're contributing, make sure you're working in a branch other than Main.
If you create a new branch, make sure its name includes:
Examples: Altimeter_HW, Sensors_FW
Currently we're using KiCAD 8.0.6.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C11, C25, C26 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R7, R14 |
| 5 | LM66100DCKR | LMR66100:SC-70-6_Handsoldering | U4, U5, U6, U10, U11 |
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C9, C10, C12, C13 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C15, C23, C27 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C22 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C20, C21 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C16, C18 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D2, D3 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C17, C19 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4, D6 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | FB1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.9 | C7 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP10 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_4x5.4 | C24 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BSENS | TestPoint:TestPoint_Pad_1.5x1.5mm | TP11 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U8 |
| 1 | DB_LED (YLW) | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP9 |
| 1 | ISO1042BDWVR | ISO1042:SOIC-8 ISO1042BDWV | U9 |
| 1 | LoRa1262F30 | footprints:LoRa1262F30 | U1 |
| 1 | PA9 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | PB6 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | PB7 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | PS1240P02BT | footprints:Buzzer_12.6x9.5RM5.0 | BZ1 |
| 1 | PWR_LED (GRN) | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SMA Antenna | footprints:KH-SMA-K513-G | AE1 |
| 1 | STM32F103CBT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U7 |
| 1 | SWD_01x04_Pin | SWD_Header:SWD_PinHeader_1x04_P2.54mm_Horizontal_SMD | J2 |
| 1 | SW_STM_BOOT_MODE | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | SW_STM_RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | Stack Male Edge Connector | Connector_PCBEdge:BUS_PCIexpress_x1 | J3 |
| 1 | TPM8837C-SO1R | footprints:SOP-8_TPK | U12 |
| 1 | USB_C_Female_USB2_Small | footprints:USB_C_DB-108PWB | J1 |
| 1 | VSTAK | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | X322516MMB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.


Queens-Rocket-Engineering-Team/av-power
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs

daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.

Momozavur/F7FC-V0.1
Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.

VikeshSubra/FreesideElectronics
Circuits, code, and docs related to projects and classes for the Freeside Atlanta Makerspace

RaduAndre/DeskMixer
DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.

chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.

verIdyia/astra-board
ESP32-C3 development board: a documented AI-assisted PCB experiment
It measures 69.5 × 62.6 mm and has 4 copper layers, 1.61 mm thick.
77 parts, built around the STM32F103CBT6, ISO1042BDWVR, LORA1262F30-868 and TPM8837C-SO1R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Queens-Rocket-Engineering-Team/Avionics-23-26 repository on GitHub, at the commit this page was made from: the board is Schematics/Communications_Module/Communications_Module.kicad_pcb and its schematic Schematics/Altimeter_Module/Altimeter_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Queens-Rocket-Engineering-Team before reusing the design.