Skip to the content
12345678

ISO1042BDWVR

Texas InstrumentsExtended

-40℃~+125℃ 1.71V~5.5V、4.5V~5.5V 5Mbps 73.4mA CAN FD Transceiver SOIC-8-300mil CAN Transceivers ROHS

Part id
ti/ISO1042BDWVR
Category
CAN Transceivers
Package
SOIC-8-300mil
Pins
8
In stock
2 at JLCPCB (C484409)
Used on
13 open-source boards

Overview

The ISO1042BDWVR is a CAN Transceiver made by Texas Instruments in a SOIC-8-300mil package with 8 pins. -40℃~+125℃ 1.71V~5.5V、4.5V~5.5V 5Mbps 73.4mA CAN FD Transceiver SOIC-8-300mil CAN Transceivers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ISO1042BDWVR, from EasyEDA) and its footprint (Package_SO:SOIC-8_7.5x5.85mm_P1.27mm, from KiCad's library), ready for a KiCad board. 2 are in stock at JLCPCB (part C484409). 13 open-source boards in 8 repositories on GitHub use it.

Symbol

1VCC12TXD3RXD4GND15GND26CANL7CANH8VCC2
EasyEDA_Cloud:ISO1042BDWVRFrom EasyEDA

Footprint

12345678
Package_SO:SOIC-8_7.5x5.85mm_P1.27mmFrom KiCad's library

From the datasheet

16
Supply, least
1.71 V · VCC1, recommended operating min, 1.8V operation · p. 5
Supply, most
1.89 V · VCC1, recommended operating max, 1.8V operation · p. 5
Supply, least
2.25 V · VCC1, recommended operating min, 2.5V, 3.3V and 5.5V operation · p. 5
Supply, most
5.5 V · VCC1, recommended operating max, 2.5V, 3.3V and 5.5V operation · p. 5
Supply, least
4.5 V · VCC2, recommended operating min · p. 5
Supply, absolute maximum
6 V · VCC1, absolute max · p. 5
Works from
-40 °C · Operating ambient temperature min · p. 5
Works up to
125 °C · Operating ambient temperature max · p. 5
Junction, hottest
150 °C · Junction temperature absolute max · p. 5
A pin gives at most
15 mA · RXD output current absolute max, source or sink · p. 5
Takes working
4.1 mA · sum of typical ICC1 and ICC2, bus recessive, VCC1 = 2.25V to 5.5V, RL = 60Ω · p. 9
Takes at most
76.9 mA · sum of max ICC1 and ICC2, bus dominant, RL = 60Ω · p. 9
Junction to air (DWV (SOIC))
100 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (DWV (SOIC))
40.8 K/W · Junction-to-case (top) thermal resistance · p. 6
Junction to board (DWV (SOIC))
51.8 K/W · Junction-to-board thermal resistance · p. 6
Edge
1.4 ns · RXD output rise time typical, CL(RXD) = 15pF · p. 11

What it is and has

13
CAN physical layer standard
ISO 11898-2:2016 · p. 1
Loop delay
152ns · p. 1
DC bus fault protection
±70V · p. 1
Bus pin HBM ESD tolerance
±16kV · p. 1
Protection
Driver Dominant Time Out (TXD DTO) · p. 1
Protection
Undervoltage protection on VCC1 and VCC2 · p. 1
Common-mode voltage range
±30V · p. 1
CMTI
100kV/µs · p. 1
Logic interface voltages
1.8V, 2.5V, 3.3V and 5.0V · p. 1
Package options
16-SOIC and 8-SOIC · p. 1
Isolation protection level
Basic, ISO1042Bx · p. 1
UL 1577 isolation
5000VRMS for 1 minute · p. 1
CAN physical layer
ISO 11898-2:2016 · p. 1

Around it

4
res not specified
between TXD and VCC1; Pull up TXD to force a recessive input level if the microprocessor output floats. · p. 22
res 120Ω
between CANH and CANL; Terminate both ends of the cable with resistors equal to its characteristic impedance. · p. 25
cap 0.1µF
between VCC1 and GND1; Bypass capacitor; place as close to the supply pin as possible. · p. 28
cap 4.7μF
between VCC2 and GND2; Typical bulk capacitance; place near the VCC2 supply pin. · p. 28

Specifications

118
ParameterConditionsAs printedPage
Supply voltage, side 1 VCC1Over operating free-air temperature rangemin -0.5 · max 6 V5
Supply voltage, side 2 VCC2Over operating free-air temperature rangemin -0.5 · max 6 V5
Logic input and output voltage range (TXD and RXD) VIOMaximum VCC1+0.5(3); maximum voltage must not exceed 6Vmin -0.5 V5
Output current on RXD pin IOmin -15 · max 15 mA5
Voltage on bus pins (CANH, CANL) VBUSmin -70 · max 70 V5
Differential voltage on bus pins (CANH-CANL) VBUS_DIFFmin -70 · max 70 V5
Junction temperature TJmin -40 · max 150 ℃5
Storage temperature TSTGmin -65 · max 150 ℃5
Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 V(ESD)All pins(1); rating ±6000 Vmin -6000 · max 6000 V5
Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 V(ESD)CANH and CANL to GND2(1); rating ±16000 Vmin -16000 · max 16000 V5
Electrostatic discharge Charged device model (CDM), per JEDEC specification JESD22-C101 V(ESD)All pins(2); rating ±1500 Vmin -1500 · max 1500 V5
ISO7637-2 Transients according to GIFT - ICT CAN EMC test specification VPULSEPulse 1; CAN bus terminals (CANH, CANL) to GND2; specified pulse valuetyp -100 V5
ISO7637-2 Transients according to GIFT - ICT CAN EMC test specification VPULSEPulse 2; CAN bus terminals (CANH, CANL) to GND2; specified pulse valuetyp 75 V5
ISO7637-2 Transients according to GIFT - ICT CAN EMC test specification VPULSEPulse 3a; CAN bus terminals (CANH, CANL) to GND2; specified pulse valuetyp -150 V5
ISO7637-2 Transients according to GIFT - ICT CAN EMC test specification VPULSEPulse 3b; CAN bus terminals (CANH, CANL) to GND2; specified pulse valuetyp 100 V5
Supply Voltage, Side 1, 1.8V operation VCC11.8V operationmin 1.71 · max 1.89 V5
Supply Voltage, Side 1, 2.5V, 3.3V and 5.5V operation VCC12.5V, 3.3V and 5.5V operationmin 2.25 · max 5.5 V5
Supply Voltage, Side 2 VCC2min 4.5 · max 5.5 V5
Operating ambient temperature TAmin -40 · max 125 °C5
Junction-to-ambient thermal resistance RΘJADWV (SOIC), 8 PINStyp 100 °C/W6
Junction-to-case (top) thermal resistance RΘJC(top)DWV (SOIC), 8 PINStyp 40.8 °C/W6
Junction-to-board thermal resistance RΘJBDWV (SOIC), 8 PINStyp 51.8 °C/W6
Junction-to-top characterization parameter ΨJTDWV (SOIC), 8 PINStyp 16.8 °C/W6
Junction-to-board characterization parameter ΨJBDWV (SOIC), 8 PINStyp 49.8 °C/W6
Maximum power dissipation (both sides) PDSee Figure 6-3, VCC1 = VCC2 = 5.5V, TJ = 150°C, RL = 50Ω, A repetitive pattern on TXD with 1ms time period, 990us LOW time, and 10us HIGH time.max 385 mW6
Maximum power dissipation (side-1) PD1See Figure 6-5, VCC1 = VCC2 = 5.5V, TJ = 150°C, RL = 50Ω, Input a 2V pk-pk 2.5MHz 50% duty cycle differential square wave on CANH-CANLmax 25 mW6
Maximum power dissipation (side-2) PD2See Figure 6-3, VCC1 = VCC2 = 5.5V, TJ = 150°C, RL = 50Ω, A repetitive pattern on TXD with 1ms time period, 990us LOW time, and 10us HIGH time.max 360 mW6
External clearance(1) CLRDWV-8; Side 1 to side 2 distance through air; specification >8.5 mmmin 8.5 mm7
External Creepage(1) CPGDWV-8; Side 1 to side 2 distance across package surface; specification >8.5 mmmin 8.5 mm7
Distance through the insulation DTIDWV-8; Minimum internal gap (internal clearance); specification >17 ummin 17 um7
Comparative tracking index CTIDWV-8; IEC 60112; UL 746A; specification >600 Vmin 600 V7
Maximum repetitive peak isolation voltage VIORMDWV-8; AC voltage (bipolar)max 1500 VPK7
Maximum isolation working voltage VIOWMDWV-8; AC voltage (sine wave); time-dependent dielectric breakdown (TDDB) testmax 1060 VRMS7
Maximum isolation working voltage VIOWMDWV-8; DC voltagemax 2121 VDC7
Maximum transient isolation voltage VIOTMDWV-8; VTEST = VIOTM, t = 60s (qualification); VTEST = 1.2 × VIOTM, t = 1s (100% production)max 7071 VPK7
Maximum surge isolation voltage ISO1042B (3) VIOSMISO1042B, DWV-8; Test method per IEC 62368-1, 1.2/50us waveformmax 6000 VPK7
Apparent charge(4) qpdISO1042B, DWV-8; Method a: After I/O safety test subgroup 2/3, Vini = VIOTM, tini = 60s; Vpd(m) = 1.2 × VIORM, tm = 10s; specification ≤5 pCmax 5 pC7
Apparent charge(4) qpdISO1042B, DWV-8; Method a: After environmental tests subgroup 1, Vini = VIOTM, tini = 60s; Vpd(m) = 1.2 × VIORM, tm = 10s; specification ≤5 pCmax 5 pC7
Apparent charge(4) qpdISO1042B, DWV-8; At routine test (100% production), Method b1: Vini = 1.2 × VIOTM, tini = 1s; Vpd(m) = 1.5 × VIORM, tm = 1s, or Method b2: Vpd(m) = Vini, tm = tini; specification ≤5 pCmax 5 pC7
Barrier capacitance, input to output(5) CIODWV-8; VIO = 0.4 × sin (2 πft), f = 1MHztyp 1 pF7
Pollution degreeDWV-8; pollution degree 2typ 27
Withstand isolation voltage VISODWV-8; UL 1577; VTEST = VISO, t = 60s (qualification); VTEST = 1.2 × VISO, t = 1s (100% production)max 5000 VRMS7
Safety input, output, or supply current ISDWV-8 PACKAGE; RθJA = 100°C/W, VI = 5.5V, TJ = 150°C, TA = 25°C, see Figure 5-2max 227 mA8
Safety input, output, or supply current ISDWV-8 PACKAGE; RθJA = 100°C/W, VI = 3.6V, TJ = 150°C, TA = 25°C, see Figure 5-2max 347 mA8
Safety input, output, or supply current ISDWV-8 PACKAGE; RθJA = 100°C/W, VI = 2.75V, TJ = 150°C, TA = 25°C, see Figure 5-2max 454 mA8
Safety input, output, or supply current ISDWV-8 PACKAGE; RθJA = 100°C/W, VI = 1.89V, TJ = 150°C, TA = 25°C, see Figure 5-2max 661 mA8
Safety input, output, or total power PSDWV-8 PACKAGE; RθJA = 100°C/W, TJ = 150°C, TA = 25°C, see Figure 5-4max 1250 mW8
Maximum safety temperature TSDWV-8 PACKAGEmax 150 °C8
Supply current Side 1 ICC1VCC1 =1.71V to 1.89V, TXD = 0V, bus dominanttyp 2.3 · max 3.5 mA9
Supply current Side 1 ICC1VCC1 = 2.25V to 5.5V, TXD = 0V, bus dominanttyp 2.4 · max 3.5 mA9
Supply current Side 1 ICC1VCC1 = 1.71V to 1.89V, TXD = VCC1, bus recessivetyp 1.2 · max 2.1 mA9
Supply current Side 1 ICC1VCC1 = 2.25V to 5.5V, TXD = VCC1, bus recessivetyp 1.3 · max 2.1 mA9
Supply current Side 2 ICC2TXD = 0V, bus dominant, RL = 60Ωtyp 43 · max 73.4 mA9
Supply current Side 2 ICC2TXD = VCC1, bus recessive, RL = 60Ωtyp 2.8 · max 4.1 mA9
Rising undervoltage detection, Side 1 UVVCC1max 1.7 V9
Falling undervoltage detection, Side 1 UVVCC1min 1 V9
Hysteresis voltage on VCC1 undervoltage lock-out VHYS(UVCC1)min 75 · typ 125 mV9
Rising undervoltage detection, side 2 UVVCC2typ 4.2 · max 4.45 V9
Falling undervoltage detection, side 2 UVVCC2min 3.8 · typ 4 · max 4.25 V9
Hysteresis voltage on VCC2 undervoltage lock-out VHYS(UVCC2)typ 200 mV9
High level input leakage current IIHTXD = VCC1max 1 uA9
Low level input leakage current IILTXD = 0Vmin -20 uA9
Input capacitance CITXD; VIN = 0.4x sin(2 × π × 1E+6x t) + 2.5V, VCC1 = 5Vtyp 3 pF9
High level output voltage VOH - VCC1See Figure 6-4, IO = -4mA for 4.5V ≤ VCC1 ≤ 5.5Vmin -0.4 · typ -0.2 V9
High level output voltage VOH - VCC1See Figure 6-4, IO = -2mA for 3.0V ≤ VCC1 ≤ 3.6Vmin -0.2 · typ -0.07 V9
High level output voltage VOH - VCC1See Figure 6-4, IO = -1mA for 2.25V ≤ VCC1 ≤ 2.75Vmin -0.1 · typ -0.04 V9
High level output voltage VOH - VCC1See Figure 6-4, IO = -1mA for 1.71V ≤ VCC1 ≤ 1.89Vmin -0.1 · typ -0.045 V9
Low level output voltage VOLSee Figure 6-4, IO = 4mA for 4.5V ≤ VCC1 ≤ 5.5Vtyp 0.2 · max 0.4 V9
Low level output voltage VOLSee Figure 6-4, IO = 2mA for 3.0V ≤ VCC1 ≤ 3.6Vtyp 0.07 · max 0.2 V9
Low level output voltage VOLSee Figure 6-4, IO = 1mA for 2.25V ≤ VCC1 ≤ 2.75Vtyp 0.035 · max 0.1 V9
Low level output voltage VOLSee Figure 6-4, IO = 1mA for 1.71V ≤ VCC1 ≤ 1.89Vtyp 0.04 · max 0.1 V9
Bus output voltage(Dominant), CANH VO(DOM)See Figure 6-1 and Figure 6-2, TXD = 0V, 50Ω ≤ RL ≤ 65Ω, CL = openmin 2.75 · max 4.5 V10
Bus output voltage(Dominant), CANL VO(DOM)See Figure 6-1 and Figure 6-2, TXD = 0V, 50Ω ≤ RL ≤ 65Ω, CL = openmin 0.5 · max 2.25 V10
Bus output voltage(recessive), CANH and CANL VO(REC)See Figure 6-1 and Figure 6-2, TXD = VCC1, RL = open; typical 0.5 × VCC2min 2 · max 3 V10
Differential output voltage, CANH-CANL (dominant) VOD(DOM)See Figure 6-1 and Figure 6-2, TXD = 0V, 45Ω ≤ RL ≤ 50Ω, CL = openmin 1.4 · max 3 V10
Differential output voltage, CANH-CANL (dominant) VOD(DOM)See Figure 6-1 and Figure 6-2, TXD = 0V, 50Ω ≤ RL ≤ 65Ω, CL = openmin 1.5 · max 3 V10
Differential output voltage, CANH-CANL (dominant) VOD(DOM)See Figure 6-1 and Figure 6-2, TXD = 0V, RL = 2240Ω, CL = openmin 1.5 · max 5 V10
Differential output voltage, CANH-CANL (recessive) VOD(REC)See Figure 6-1 and Figure 6-2, TXD = VCC1, RL = 60Ω, CL = openmin -120 · max 12 mV10
Differential output voltage, CANH-CANL (recessive) VOD(REC)See Figure 6-1 and Figure 6-2, TXD = VCC1, RL = open, CL = openmin -50 · max 50 mV10
DC Output symmetry (VCC2 - VO(CANH) - VO(CANL)) VSYM_DCSee Figure 6-1 and Figure 6-2, RL = 60Ω, CL = open, TXD = VCC1 or 0Vmin -400 · max 400 mV10
Short circuit current steady state output current, dominant ISO(SS_DOM)See Figure 6-9, VCANH = -5V to 40V, CANL = open, TXD = 0Vmin -100 mA10
Short circuit current steady state output current, dominant ISO(SS_DOM)See Figure 6-9, VCANL = -5V to 40V, CANH = open, TXD = 0Vmax 100 mA10
Short circuit current steady state output current, recessive ISO(SS_REC)See Figure 6-9, -27V ≤ VBUS ≤ 32V, VBUS = CANH = CANL, TXD = VCC1min -5 · max 5 mA10
Differential input threshold voltage VITSee Figure 6-4 and Table 6-1, |VCM| ≤ 20Vmin 500 · max 900 mV10
Differential input threshold voltage VITSee Figure 6-4 and Table 6-1, 20V ≤ |VCM| ≤ 30Vmin 400 · max 1000 mV10
Hysteresis voltage for differential input threshold VHYSSee Figure 6-4 and Table 6-1typ 120 mV10
Input common mode range VCMSee Figure 6-4 and Table 6-1min -30 · max 30 V10
Power-off bus input leakage current IOFF(LKG)CANH = CANL = 5V, VCC2 to GND via 0Ω and 47kΩ resistormax 4.8 uA10
Input capacitance to ground (CANH or CANL) CITXD = VCC1typ 24 · max 30 pF10
Differential input capacitance (CANH-CANL) CIDTXD = VCC1typ 12 · max 15 pF10
Differential input resistance RIDTXD = VCC1; -30V ≤ VCM ≤ +30Vmin 30 · max 80 kΩ10
Input resistance (CANH or CANL) RINTXD = VCC1; -30V ≤ VCM ≤ +30Vmin 15 · max 40 kΩ10
Input resistance matching: (1 - RIN(CANH)/RIN(CANL)) x 100% RIN(M)VCANH = VCANL = 5Vmin -2 · max 2 %10
Thermal shutdown temperature TTSDtyp 170 °C10
Thermal shutdown hysteresis TTSD_HYSTtyp 5 °C10
Total loop delay, driver input TXD to receiver RXD, recessive to dominant tPROP(LOOP1)See Figure 6-6, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; 1.71V ≤ VCC1 ≤ 1.89Vmin 70 · typ 125 · max 198 ns11
Total loop delay, driver input TXD to receiver RXD, recessive to dominant tPROP(LOOP1)See Figure 6-6, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; 2.25V ≤ VCC1 ≤ 5.5Vmin 70 · typ 122 · max 192 ns11
Total loop delay, driver input TXD to receiver RXD, dominant to recessive tPROP(LOOP2)See Figure 6-6, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; 1.71V ≤ VCC1 ≤ 1.89Vmin 70 · typ 155 · max 215 ns11
Total loop delay, driver input TXD to receiver RXD, dominant to recessive tPROP(LOOP2)See Figure 6-6, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; 2.25V ≤ VCC1 ≤ 5.5Vmin 70 · typ 152 · max 215 ns11
Re-enable time after Undervoltage event tUV_RE_ENABLETime for device to return to normal operation from VCC1 or VCC2 undervoltage eventmax 300 us11
Common mode transient immunity CMTIVCM = 1200VPK, See Figure 6-10min 85 · typ 100 kV/us11
Propagation delay time, HIGH TXD to driver recessive tpHRSee Figure 6-3, RL = 60Ω and CL = 100pF; input rise/fall time (10% to 90%) on TXD = 1nstyp 76 · max 120 ns11
Propagation delay time, LOW TXD to driver dominant tpLDSee Figure 6-3, RL = 60Ω and CL = 100pF; input rise/fall time (10% to 90%) on TXD = 1nstyp 61 · max 120 ns11
Pulse skew (|tpHR - tpLD|) tsk(p)See Figure 6-3, RL = 60Ω and CL = 100pF; input rise/fall time (10% to 90%) on TXD = 1nstyp 14 ns11
Differential output signal rise time tRSee Figure 6-3, RL = 60Ω and CL = 100pF; input rise/fall time (10% to 90%) on TXD = 1nstyp 45 ns11
Differential output signal fall time tFSee Figure 6-3, RL = 60Ω and CL = 100pF; input rise/fall time (10% to 90%) on TXD = 1nstyp 45 ns11
Output symmetry (dominant or recessive) (VO(CANH) + VO(CANL)) / VCC2 VSYMSee Figure 6-3 and Figure 8-4, RTERM = 60Ω, CSPLIT = 4.7nF, CL = open, RL = open, TXD = 250kHz, 1MHzmin 0.9 · max 1.1 V/V11
Dominant time out tTXD_DTOSee Figure 6-8, RL = 60Ω and CL = openmin 1.2 · max 3.8 ms11
Propagation delay time, bus recessive input to RXD high output tpRHSee Figure 6-5, CL(RXD) = 15pFtyp 75 · max 130 ns11
Propagation delay time, bus dominant input to RXD low output tpDLSee Figure 6-5, CL(RXD) = 15pFtyp 63 · max 130 ns11
Output signal rise time(RXD) tRSee Figure 6-5, CL(RXD) = 15pFtyp 1.4 ns11
Output signal fall time(RXD) tFSee Figure 6-5, CL(RXD) = 15pFtyp 1.8 ns11
Bit time on CAN bus output pins with tBIT(TXD) = 500ns tBIT(BUS)See Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1nsmin 435 · max 530 ns11
Bit time on CAN bus output pins with tBIT(TXD) = 200ns tBIT(BUS)See Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1nsmin 155 · max 210 ns11
Bit time on RXD output pins with tBIT(TXD) = 500ns tBIT(RXD)See Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1nsmin 400 · max 550 ns12
Bit time on RXD output pins with tBIT(TXD) = 200ns tBIT(RXD)See Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1nsmin 120 · max 220 ns12
Receiver timing symmetry with tBIT(TXD) = 500ns ∆tRECSee Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; ΔtREC = tBIT(RXD) - tBIT(BUS)min -65 · max 40 ns12
Receiver timing symmetry with tBIT(TXD) = 200ns ∆tRECSee Figure 6-7, RL = 60Ω, CL = 100pF, CL(RXD) = 15pF; input rise/fall time (10% to 90%) on TXD = 1ns; ΔtREC = tBIT(RXD) - tBIT(BUS)min -45 · max 15 ns12

Ordering codes, by the datasheet

18
ISO1042BDW
SOIC (DW) | 16 · ISO1042B marking; 40 | TUBE; -40 to 125 °C · p. 36
ISO1042BDW.A
SOIC (DW) | 16 · ISO1042B marking; 40 | TUBE; -40 to 125 °C · p. 36
ISO1042BDWR
SOIC (DW) | 16 · ISO1042B marking; 2000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042BDWR.A
SOIC (DW) | 16 · ISO1042B marking; 2000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042BDWV
SOIC (DWV) | 8 · ISO1042B marking; 64 | TUBE; -40 to 125 °C · p. 36
ISO1042BDWV.A
SOIC (DWV) | 8 · ISO1042B marking; 64 | TUBE; -40 to 125 °C · p. 36
ISO1042BDWVR
SOIC (DWV) | 8 · ISO1042B marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042BDWVR.A
SOIC (DWV) | 8 · ISO1042B marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DW
SOIC (DW) | 16 · ISO1042 marking; 40 | TUBE; -40 to 125 °C · p. 36
ISO1042DW.A
SOIC (DW) | 16 · ISO1042 marking; 40 | TUBE; -40 to 125 °C · p. 36
ISO1042DWR
SOIC (DW) | 16 · ISO1042 marking; 2000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DWR.A
SOIC (DW) | 16 · ISO1042 marking; 2000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DWV
SOIC (DWV) | 8 · ISO1042 marking; 64 | TUBE; -40 to 125 °C · p. 36
ISO1042DWV.A
SOIC (DWV) | 8 · ISO1042 marking; 64 | TUBE; -40 to 125 °C · p. 36
ISO1042DWVR
SOIC (DWV) | 8 · ISO1042 marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DWVR.A
SOIC (DWV) | 8 · ISO1042 marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DWVRG4
SOIC (DWV) | 8 · ISO1042 marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36
ISO1042DWVRG4.A
SOIC (DWV) | 8 · ISO1042 marking; 1000 | LARGE T&R; -40 to 125 °C · p. 36

Open-source boards using it

13See all 13
  • 4 layers154.5 × 112.9 mmLibrePLC32, the printed circuit board in 3D

    LibrePLC32

    AndreiVladescu/LibrePLC32

    The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

    295 parts14CERN-OHL-P-2.0
  • 4 layers69.5 × 62.6 mmSensors Module, the printed circuit board in 3D

    Sensors Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    197 parts4
  • 4 layers143.1 × 87.6 mmThermistor Expansion Module, the printed circuit board in 3D

    Thermistor Expansion Module

    Gad9889/Thermistor-Expansion-Module

    KiCad project files remain at the repository root. Hierarchical schematic sheets are organized under schematics/, with connector sheets in schematics/connectors/ and gate sheets in schematics/gates/.

    114 parts
  • 2 layers100 × 50 mmCan iso, the printed circuit board in 3D

    Can iso

    karimf1/J939-transceiver

    This project is an isolated CAN/J1939 transceiver breakout on a 2-layer board. It includes a DE-9 or terminal block and termination jumper.

    41 partsMIT
  • 2 layers69.5 × 62.6 mmCamera Module, the printed circuit board in 3D

    Camera Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    90 parts4
  • 4 layers69.5 × 62.6 mmCommunications Module, the printed circuit board in 3D

    Communications Module

    Queens-Rocket-Engineering-Team/Avionics-23-26

    QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

    77 parts4

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the ISO1042BDWVR?

Yes. The symbol is EasyEDA_Cloud:ISO1042BDWVR and the footprint Package_SO:SOIC-8_7.5x5.85mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ISO1042BDWVR?

SOIC-8-300mil, with 8 pins. Its footprint is drawn on this page.

Where is the ISO1042BDWVR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the ISO1042BDWVR?

JLCPCB lists it as part C484409, with 2 in stock; the sellers' links on this page open their listings.

What can replace the ISO1042BDWVR?

Parts like it in the library: the ISO1042BQDWVRQ1 by Texas Instruments, the ISO1042DWV by Texas Instruments, the ISO1042BQDWVQ1 by Texas Instruments and the ISO1042BDWV by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ISO1042BDWVR?

13 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.