
Sensors Module
Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

Open the appropriate .kicadpro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together.
F7FC is an open-source printed circuit board by Momozavur, from the Momozavur/F7FC-V0.1 repository on GitHub. It is a 2-layer board of 37 × 37 mm with 69 parts on 112 nets, routed with 501 tracks and 101 vias.
It is built around the W25Q128JVSIQ, ICM-20602 and LP2985-33DBVR, with the BAT54C, MICRO5.9MMUSB and KMR223GLFG among its other parts. Its parts include 10 connectors, 5 ICs, 2 diodes, 1 switch and 1 inductor. It belongs with the STM32 boards of this library.
KiCad design files for F7FC V0.1.
Open the appropriate .kicad_pro file in KiCad; .pro entries are legacy projects. Keep schematics, boards, local libraries, library tables, and supporting files together. Hierarchical schematic sheets are part of their parent design.
Automatic backups, recovery files, editor state, and filesystem metadata are ignored. Existing fabrication outputs and local component libraries are retained. For existing repositories, ignore rules do not automatically untrack previously committed files.
Review and save a meaningful design revision with:
git status --short
git diff
git add -- <changed-files>
git commit -m "Describe the design change"Add a clear 3D board view at docs/images/board-3d.png and, optionally, a PCB layout view at docs/images/pcb-layout.png. A schematic PDF is useful for reading circuit details. Once present, embed an image in this README with . For folders with several designs, use a separate named image for each.
Describe purpose, power and connectors, revision status, assembly requirements, and what has been physically tested. The repository setup does not establish electrical correctness or manufacturing readiness.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | MCU_C2, MCU_C3, MCU_C4, MCU_C5, MCU_C6, MCU_C7, MCU_C8, NRST_C1, VREF_C2 |
| 8 | Conn_01x04_Male | Connector_Pin:solderpads1x04 | J2, J3, J4, J5, J5, J5, J6, J6 |
| 4 | 0.1u | Capacitor_SMD:C_0402_1005Metric | 5_C2, 5_C3, GYRO_C1, GYRO_C4 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | 3.3_C1, MCU_C9, MCU_C10, VREF_C1 |
| 4 | 2.2u | Capacitor_SMD:C_0402_1005Metric | 3.3_C3, GYRO_C2, VCAP_C1, VCAP_C2 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_ISO14580_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | , , | ||
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | BOOT_R1, Flash_R1, Flash_R2 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | 3.3_C2, GYRO_C3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | Crystal_C1, Crystal_C2 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | 5_C1, MCU_C1 |
| 2 | 1k5 | Resistor_SMD:R_0402_1005Metric | 3.3_R1, USB_R1 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | 5_C4, 5_C5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | 5_R3 |
| 1 | 105k | Resistor_SMD:R_0603_1608Metric | 5_R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | L1 |
| 1 | 13.3k | Resistor_SMD:R_0603_1608Metric | 5_R4 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric | VREF_R1 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric | 5_R1 |
| 1 | 75p | Capacitor_SMD:C_0402_1005Metric | 5_C6 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | C393940 | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J1 |
| 1 | Conn_01x06_Male | Connector_Pin:solderpads1x06 | J7 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | ICM-20602 | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | KMR223GLFG | Button_Switch_SMD:SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LP2985-33DBVR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F745VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TPS54302DDCR | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | X322516MMB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |

Queens-Rocket-Engineering-Team/Avionics-23-26
QRET Avionics hardware, firmware, and documentation for 2023 to 2025.

daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.


Circuit-Digest/Smart-Universal-Remote-with-Learning-function-and-Google-Assistant-Support
Smart Universal Remote with Learning function and Google Assistant Support


Pedro-Seixas/Smartwatch
A custom-designed smartwatch built around the ESP32-S3, combining BLE connectivity, a rectangular touch display, recharge capability, IMU and temperature sensors. Designed from the ground up in KiCad.

PCB-Arts/fast-open-switch-hardware
KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.

RaduAndre/DeskMixer
DeskMixer is a software that allows control of application volumes with real sliders, and action mapping on buttons using arduino like platforms. The project was inspired originally by deej.
It measures 37 × 37 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the W25Q128JVSIQ, ICM-20602, LP2985-33DBVR and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Momozavur/F7FC-V0.1 repository on GitHub, at the commit this page was made from: the board is F7FC.kicad_pcb and its schematic F7FC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Momozavur before reusing the design.