Skip to the content

ESP32

1,360 boards

KiCad boards from 647 GitHub repositories tagged “esp32”, the most starred first; open any of them in PCBKit.

  • 2 layers190 × 153.2 mmZone controller, the printed circuit board in 3D

    Zone controller

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    1,117 parts1
  • 2 layers190 × 153.2 mmZone controller, the printed circuit board in 3D

    Zone controller

    RomLab/pcb-system-for-underfloor-heating-v2.0

    PCB for underfloor heating system

    579 parts1
  • 2 layers44.9 × 54.2 mmAttendance System Simple, the printed circuit board in 3D

    Attendance System Simple

    sgariba21-beep/esp32-attendance-device

    An ESP32-based fingerprint device for automating attendance in schools and other institutions

    3 parts1AGPL-3.0
  • 4 layers80 × 42 mmHandle module, the printed circuit board in 3D

    Handle module

    shm-dmitry/auto_close_window

    This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

    114 parts1Apache-2.0
  • 4 layers97.5 × 52 mmMain module, the printed circuit board in 3D

    Main module

    shm-dmitry/auto_close_window

    This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

    121 parts1Apache-2.0
  • 2 layers26.4 × 41.7 mmDevboard, the printed circuit board in 3D

    Devboard

    Soraxem/trance

    Open Lighting hardware

    18 parts1CERN-OHL-P-2.0
  • 2 layers76.4 × 111.6 mm4x Mini Controller, the printed circuit board in 3D

    4x Mini Controller

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    31 parts1
  • 2 layers76.4 × 90.8 mm4x Mini Controller Wired, the printed circuit board in 3D

    4x Mini Controller Wired

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    26 parts1
  • 2 layers41.9 × 39.4 mmHonyone RGB Shield, the printed circuit board in 3D

    Honyone RGB Shield

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    11 parts1
  • 2 layers134.8 × 82.4 mmInteractiles Module Neopixel, the printed circuit board in 3D

    Interactiles Module Neopixel

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    30 parts1
  • 4 layers38 × 33.2 mmMini Module, the printed circuit board in 3D

    Mini Module

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    29 parts1
  • 2 layers39.6 × 36.4 mmModule Large IOexpander, the printed circuit board in 3D

    Module Large IOexpander

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    15 parts1
  • 2 layers41.9 × 59.7 mmRGB 2x2 with WS2811, the printed circuit board in 3D

    RGB 2x2 with WS2811

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    47 parts1
  • 4 layers38 × 45.3 mmSolo Mini Controller, the printed circuit board in 3D

    Solo Mini Controller

    sullyjason/interactiles

    Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.

    36 parts1
  • 4 layers133.4 × 31.3 mmTeacup interposer, the printed circuit board in 3D

    Teacup interposer

    thingino/teacup-neo

    Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

    35 parts1GPL-3.0
  • 4 layers133.4 × 31.3 mmTeacup interposer t41, the printed circuit board in 3D

    Teacup interposer t41

    thingino/teacup-neo

    Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

    61 parts1GPL-3.0
  • 4 layers86.2 × 56.2 mmTeacup t41, the printed circuit board in 3D

    Teacup t41

    thingino/teacup-neo

    Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

    123 parts1GPL-3.0
  • 2 layers27.9 × 15.2 mmB4 panel, the printed circuit board in 3D

    B4 panel

    vintlabs/MCP9600-Module

    MCP9600 I²C Module (Hardware)

    11 parts1CC-BY-SA-4.0
  • 2 layers27.9 × 15.2 mmMCP9600-Module, the printed circuit board in 3D

    MCP9600-Module

    vintlabs/MCP9600-Module

    MCP9600 I²C Module (Hardware)

    10 parts1CC-BY-SA-4.0
  • 2 layers94 × 78.2 mmBirdNest pcb, the printed circuit board in 3D

    BirdNest pcb

    VorosEgyes/BirdNest

    BirdNest Camera

    33 parts1MIT
  • 2 layers100 × 100 mmBirdNest pcb, the printed circuit board in 3D

    BirdNest pcb

    VorosEgyes/BirdNest

    BirdNest Camera

    49 parts1MIT
  • 2 layers27.5 × 24.7 mmTB6612FNG, the printed circuit board in 3D

    TB6612FNG

    Will946/Cocktail-Machine

    Tell it what's in your liquor cabinet, it asks an AI for a cocktail, then pours it through peristaltic pumps. Judges your ingredient choices silently.

    12 parts1MIT
  • 2 layers32 × 49 mmEsp32c3, the printed circuit board in 3D

    Esp32c3

    YORROY123/kicad-scripted-pcb

    Three KiCad 10 PCBs designed entirely as Python code with layered verification

    26 parts1MIT
  • 2 layers232 × 110 mmRelay8, the printed circuit board in 3D

    Relay8

    YORROY123/kicad-scripted-pcb

    Three KiCad 10 PCBs designed entirely as Python code with layered verification

    65 parts1MIT