Skip to the content
2 layers160.5 × 288 mmFaders, the printed circuit board in 3D

lighting focused midi controller

Size
160.5 × 288 mm
Copper layers
2
Thickness
1.6 mm
Parts
348
Nets
465
Pads
1,631
Tracks, vias
2,458, 268
Pours
162
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
8 Jul 2024
Updated
31 Jan 2025

Overview

Faders is an open-source printed circuit board by Tommie1236, from the Tommie1236/midi-controller repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 160.5 × 288 mm with 348 parts on 465 nets, routed with 2,458 tracks and 268 vias.

It is built around the RP2040, TLC59282DBQ and DRV8871DDA, with the MCP3008-I/P, MTCH105-I/ST and PCA9635PW among its other parts. Its parts include 170 diodes, 59 capacitors, 35 resistors, 35 ICs and 25 switches. It belongs with the audio and music and lEDs and displays boards and the RP2040 boards of this library.

Main components

8

README

README.md

Build firmware Build fader-wing

huge thanks to the amazing rp2040 skeleton project. it helped immensly setting up this project. i probably couldn't have done it without

<still need good name :)>

A lighting focused midi controller

Why?

I started this project as i wanted phisical controls to go with the mydmx3 dmx controller software.
Mydmx3 practicly only support midi as data in/out next to dmx out. So a midi controller it is.
There are more than enough midi controllers on the market but almost all of them are audio focused in the controls. I couldn't really vind any that i would like for controlling lighting. So i decided to design and build my own.

Requirements

I set a couple of requirements that i definetly wanted in my controler. As following:

Controls:
  • motorized faders. Mostly for dimming controls, enough in the playback section and 1 as Master.
    I chose motorized so they could sync with the controlling software if the value changes and for for example if you were to switch banks to a new set of controls. (mydmx doesn't support that but i wanted to design my controller to work with almost anything.)

  • Buttons. for playbacks/executors en general control, a whole lot.
    Of Course. what would a controller be without a lot of buttons. I also want them to have black with transparent text keycaps and rgb leds below to show the status of the button.

  • Encoders. Mostly speed control but could also be dimmer, at least 1 per "channel"/collumn and a couple spare. I wanted some encoders to be able to change the speed of scene/cue playbacks. But also for for example a dimmer channel dat isn't changed often but often enough to have phisical controls for.

  • Small Displays/Scribble Strips. channel/collumn names, one per channel/collumn.
    To show what cue/scene was mapped to that channel/collumn. If i implement bank switching inside the controller (as mydmx doesn't support like anything. only the most basic midi triggering) i want to see what cue i have mapped on that fader/buttons. And maybe also to show the fader/encoder value when changing. For if you want it to a specific value and the visual position isn't enough.

  • Keypad. just one, numbers 0-9 + some modifiers.
    Should speak for itself. just general number inputs and modifiers.

  • "Master" Display. (relatively) big display, just one.
    A around 3a4" touch display for configuration of the controller and general info. Main controls for anything happening inside the controller.

  • Leds. A lot. most RGB some just Amber.
    I want all the buttons to have a seperate controllable RGB led to show the buttons status. and about 16 mono Amber leds around the encoders to show their value.

Conectivity:
  • usb midi. one usb-B port. To connect to a pc running for example mydmx.

  • hardware midi. 2 or 3 din-5 ports. To connect to other midi gear or any controller that has hardware midi ports on it. Should have the same data as the usb midi port

  • External Switch Ports. 2a3 x 1/4" jack. To connect external footswitches or pedals. should support normal on/off footswitches and maybe one or 2 can have analog value support.

  • Desk Light. xlr-4?. A xlr connector that support a lot of desk lights. preferably xlr-4 so it isn't confused with audio or dmx signals. Sadly there isn't a standard for desk ligths as far as i can find.

  • Powercon Socket. Blue one. maybe also power out.
    Of cource. It needs some power to run. prefereably powercon (true1??) but a C14 socket would also work.
    with the motor faders and a lot of leds. Usb supplied power wont be enough.

And here are some features i want to support but arent required for the mvp:
  • USB Hub. Probably USB-A sockets.
    To connect more devices downstream from the controller

  • RTP MIDI. Wifi/Ethernet
    Using a ESP32 or similar to handle the network stack and enable the controller to communicate either wireless or via a ethernet cable.
    Adding to the already available midi connection options of USB-MIDI and hardware-MIDI

  • Web Server.
    Maybe a configuration webserver as the display will be quite small. would also run on the ESP32 that handels the network.
    it connects to the main rp2040 using uart.

Parts

348
QtyValueFootprintReferences
170LEDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD4000, D4001, D4002, D4003, D4004, D4005, D4006, D4007, D4008, D4009, D4010, D4011, D4012, D4013, D4014, D4015 +154
30100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC303, C304, C306, C307, C308, C309, C310, C314, C316, C318, C320, C322, C324, C326, C328, C335 +14
191uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC305, C312, C313, C315, C317, C334, C402, C404, C406, C408, C410, C412, C414, C416, C418, C420 +3
15SW_SPSTCherry MX:Cherry-MX_Plate-Mounted_LTST-A683CEGBW_Kailh_SocketSW300, SW301, SW302, SW303, SW304, SW410, SW411, SW412, SW413, SW414, SW415, SW416, SW417, SW418, SW419
102K5Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR401, R402, R403, R404, R405, R406, R407, R408, R409, R410
10LS30personal:SOIC-8_3.9x4.9mm_P1.27mmU404, U405, U406, U407, U408, U409, U410, U411, U412, U413
10RotaryEncoder_Switchpersonal:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW400, SW401, SW402, SW403, SW404, SW405, SW406, SW407, SW408, SW409
10TLC59282Package_SO:SSOP-24_3.9x8.7mm_P0.635mmU414, U415, U416, U417, U418, U419, U420, U421, U422, U423
7Conn_01x06_SocketConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ302, J303, J307, J308, J311, J312, J313
610KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR304, R310, R311, R312, R313, R314
51.05'_120x240_spi_screenpersonal:1.05' 120x240 spi screenDS301, DS302, DS303, DS304, DS305
510Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR316, R317, R318, R319, R320
5100uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC319, C321, C323, C325, C327
54K7Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR305, R306, R307, R308, R309
580KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR321, R322, R323, R324, R325
5DRV8871DDAPackage_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalViasU308, U309, U310, U311, U312
5RSA0N11M9A0Jpersonal:RSA0N11M9A0JMF301, MF302, MF303, MF304, MF305
4MCP23S17_SOPackage_SO:SOIC-28W_7.5x17.9mm_P1.27mmU307, U401, U402, U403
210ufCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC301, C302
21KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR301, R303
227pCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC338, C339
2Conn_01x03_SocketConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ314, J315
2Conn_01x05_SocketConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ309, J310
112MhzCrystal:Crystal_SMD_HC49-SDX301
12u2Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC336
1AT25SF081-SSHD-XPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU302
1Conn_02x03_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ301
1LM4040D33Package_TO_SOT_SMD:SOT-23U305
1MCP3008Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU304
1MTCH105Package_SO:TSSOP-14_4.4x5mm_P0.65mmU303
1NFITResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR302
1PCA9635Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmU306
1RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR315
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU301
1R_PotentiometerPotentiometer_SMD:Potentiometer_Bourns_TC33X_VerticalRV301

More from Tommie1236/midi-controller

3
  • 4 layers123.8 × 362.3 mmMidi controller, the printed circuit board in 3D

    Midi controller

    Tommie1236/midi-controller

    lighting focused midi controller

    516 parts2CERN-OHL-W-2.0
  • 2 layers250 × 189 mmKeypad, the printed circuit board in 3D

    Keypad

    Tommie1236/midi-controller

    lighting focused midi controller

    76 parts2CERN-OHL-W-2.0
  • 2 layers80 × 42.1 mmMIDI, the printed circuit board in 3D

    MIDI

    Tommie1236/midi-controller

    lighting focused midi controller

    24 parts2CERN-OHL-W-2.0

Similar boards

  • 2 layers99.4 × 38.6 mmSlider driver, the printed circuit board in 3D

    Slider driver

    mage0r/RSA0N11M9A0J_motorised_slider

    This is a H-bridge driver board for the RSA0N11M9A0J motorised Slider. It uses a L9110 and capacitive sensor.

    38 parts7
  • 4 layers165.1 × 76.2 mmLED Badge, the printed circuit board in 3D

    LED Badge

    mjbella/LED_Badge

    RGB LED Badge Prototype

    400 parts1
  • 2 layers98.4 × 98.4 mmRpi platform r1, the printed circuit board in 3D

    Rpi platform r1

    65roadster/TinyBench-Pico

    A Raspberry Pi Pico Breakout Board with Dual Channel DAC

    55 parts
  • 4 layers160 × 160 mmDAQCard2015, the printed circuit board in 3D

    DAQCard2015

    frmeier/VFPIX-telescope-PCB

    Repository for DTB used in the PSI pixel telescope and VFPIX project

    232 parts
  • 2 layers316 × 222 mmRunning digit, the printed circuit board in 3D

    Running digit

    sburgic/poc-and-obsolete

    Proof of concepts and old (obsolete) projects

    90 parts
  • 4 layers100 × 49.8 mmExpansion board, the printed circuit board in 3D

    Expansion board

    reubenstr/zuko

    A quadruped robot dog!

    75 parts51MIT
  • 2 layers64.8 × 62 mmSensor, the printed circuit board in 3D

    Sensor

    chukhanhhoang/SoftRoboticSetupFesto

    Code for Raspberry Pi and Matlab/Simulink

    89 parts14

Questions

How big is the Faders PCB?

It measures 160.5 × 288 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Faders use?

348 parts, built around the RP2040, TLC59282DBQ, DRV8871DDA and MCP3008-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Faders KiCad files?

From the Tommie1236/midi-controller repository on GitHub, at the commit this page was made from: the board is kicad/faders.kicad_pcb and its schematic kicad/Fader-Leds.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Faders design in my own project?

Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).