Skip to the content
12345678910111213141516

MCP3008-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHS

Part id
microchip/MCP3008-I/P
Category
Analog To Digital Converters (ADC)
Package
PDIP-16
Pins
16
In stock
53 at JLCPCB (C2890491)
Used on
123 open-source boards

Overview

The MCP3008-I/P is an analog To Digital Converter made by Microchip Technology in a PDIP-16 package with 16 pins. -40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHS.

PCBKit's library has its KiCad symbol (Analog_ADC:MCP3008, from KiCad's library) and its footprint (Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 53 are in stock at JLCPCB (part C2890491). 123 open-source boards in 101 repositories on GitHub use it.

Symbol

1CH02CH13CH24CH35CH46CH57CH68CH79DGND10CS/SHDN11Din12Dout13CLK14AGND15Vref16Vdd
Analog_ADC:MCP3008From KiCad's library

Footprint

12345678910111213141516
Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

From the datasheet

9
Supply, least
2.7 V · VDD, recommended operating minimum · p. 5
Supply, most
5.5 V · VDD, recommended operating maximum · p. 5
Supply, absolute maximum
7 V · VDD, absolute maximum · p. 3
Works from
-40 °C · TA, operating minimum · p. 5
Works up to
85 °C · TA, operating maximum · p. 5
Takes working
425 µA · IDD, typical at VDD = VREF = 5V, DOUT unloaded · p. 5
Takes at most
550 µA · IDD, max at VDD = VREF = 5V, DOUT unloaded · p. 5
Takes asleep
5 nA · IDDS, typical standby at CS = VDD = 5.0V · p. 5
Junction to air (16L-PDIP)
70 K/W · Junction to ambient, typical · p. 5

What it is and has

6
ADC resolution
10-bit · p. 1
Input channels
8 · p. 1
Sample and hold
On-chip · p. 1
SPI
Modes 0,0 and 1,1 · p. 1
Sampling rate
200 ksps maximum at VDD = 5V · p. 1
Sampling rate
75 ksps maximum at VDD = 2.7V · p. 1

Specifications

49
ParameterConditionsAs printedPage
VDD VDDmax 7 V3
All Inputs and Outputs w.r.t. VSSmin -0.6 V3
Storage Temperaturemin -65 · max 150 °C3
Ambient temperature with power appliedmin -65 · max 150 °C3
Soldering temperature of leads10 secondsmax 300 °C3
ESD Protection On All Pins (HBM)HBMmin 4 kV3
Conversion Time tCONVmax 10 clock cycles3
Analog Input Sample Time tSAMPLEtyp 1.5 clock cycles3
Throughput Rate fSAMPLEVDD = VREF = 5Vmax 200 ksps3
Throughput Rate fSAMPLEVDD = VREF = 2.7Vmax 75 ksps3
Resolutiontyp 10 bits3
Total Harmonic DistortionVIN = 0.1V to 4.9V@1 kHztyp -76 dB3
Signal-to-Noise and Distortion (SINAD)VIN = 0.1V to 4.9V@1 kHztyp 61 dB3
Spurious Free Dynamic RangeVIN = 0.1V to 4.9V@1 kHztyp 78 dB3
Voltage RangeReference Input; Note 2min 0.25 V3
Current DrainReference Inputtyp 100 · max 150 uA3
Current DrainReference Input; CS = VDD = 5Vtyp 0.001 · max 3 uA3
Leakage CurrentAnalog Inputstyp 0.001 uA4
Switch ResistanceSee Figure 4-1typ 1000 Ω4
Sample CapacitorSee Figure 4-1typ 20 pF4
High Level Output Voltage VOHIOH = -1 mA, VDD = 4.5Vmin 4.1 V4
Low Level Output Voltage VOLIOL = 1 mA, VDD = 4.5Vmax 0.4 V4
Input Leakage Current ILIVIN = VSS or VDDmin -10 · max 10 uA4
Output Leakage Current ILOVOUT = VSS or VDDmin -10 · max 10 uA4
Pin Capacitance (All Inputs/Outputs) CIN, COUTVDD = 5.0V; TA = 25°C, f = 1 MHz; Note 1max 10 pF4
Clock Frequency fCLKVDD = 5V; Note 3max 3.6 MHz4
Clock Frequency fCLKVDD = 2.7V; Note 3max 1.35 MHz4
Clock High Time tHImin 125 ns4
Clock Low Time tLOmin 125 ns4
CS Fall To First Rising CLK Edge tSUCSmin 100 ns4
CS Fall To Falling CLK Edge tCSDmax 0 ns4
Data Input Setup Time tSUmin 50 ns4
Data Input Hold Time tHDmin 50 ns4
CLK Fall To Output Data Valid tDOVDD = 5V, See Figure 1-2max 125 ns4
CLK Fall To Output Data Valid tDOVDD = 2.7V, See Figure 1-2max 200 ns4
CLK Fall To Output Enable tENVDD = 5V, See Figure 1-2max 125 ns4
CLK Fall To Output Enable tENVDD = 2.7V, See Figure 1-2max 200 ns4
CS Rise To Output Disable tDISSee Test Circuits, Figure 1-2max 100 ns4
CS Disable Time tCSHmin 270 ns4
DOUT Rise Time tRSee Test Circuits, Figure 1-2; Note 1max 100 ns4
DOUT Fall Time tFSee Test Circuits, Figure 1-2; Note 1max 100 ns4
Operating Voltage VDDmin 2.7 · max 5.5 V5
Operating Current IDDVDD = VREF = 5V, DOUT unloadedtyp 425 · max 550 uA5
Operating Current IDDVDD = VREF = 2.7V, DOUT unloadedtyp 225 uA5
Standby Current IDDSCS = VDD = 5.0Vtyp 0.005 · max 2 uA5
Specified Temperature Range TAVDD = +2.7V to +5.5V, VSS = GNDmin -40 · max 85 °C5
Operating Temperature Range TAVDD = +2.7V to +5.5V, VSS = GNDmin -40 · max 85 °C5
Storage Temperature Range TAmin -65 · max 150 °C5
Thermal Resistance, 16L-PDIP θJAMCP3008, 16L-PDIPtyp 70 °C/W5

Pins, by the datasheet

16
1 CH0
Analog input channel 0; single-ended or paired pseudo-differential input. · p. 15
2 CH1
Analog input channel 1; single-ended or paired pseudo-differential input. · p. 15
3 CH2
Analog input channel 2; single-ended or paired pseudo-differential input. · p. 15
4 CH3
Analog input channel 3; single-ended or paired pseudo-differential input. · p. 15
5 CH4
Analog input channel 4; single-ended or paired pseudo-differential input. · p. 15
6 CH5
Analog input channel 5; single-ended or paired pseudo-differential input. · p. 15
7 CH6
Analog input channel 6; single-ended or paired pseudo-differential input. · p. 15
8 CH7
Analog input channel 7; single-ended or paired pseudo-differential input. · p. 15
9 DGND
Ground connection to internal digital circuitry. · p. 15
10 CS/SHDN
Pull low to initiate communication; pull high to end conversion and enter standby; must be pulled high between conversions. · p. 15
11 DIN
SPI serial data input for channel configuration. · p. 15
12 DOUT
SPI serial conversion data output; data changes on falling clock edges. · p. 15
13 CLK
SPI serial clock initiates conversion and clocks out conversion bits. · p. 15
14 AGND
Ground connection to internal analog circuitry. · p. 15
15 VREF
Reference voltage input. · p. 15
16 VDD
+2.7V to 5.5V power supply. · p. 15

Open-source boards using it

123See all 123
  • 2 layers380 × 148.5 mmKeyboard, the printed circuit board in 3D

    Keyboard

    InkboxSoftware/all-screen-keyboard

    The first open source all-screen keyboard

    500 parts241MIT
  • 2 layers100 × 100 mmRecurBOY, the printed circuit board in 3D

    RecurBOY

    cyberboy666/recurBOY

    a rpi0 video-instrument – created in collaboration with Guergana Tzatchkova

    35 parts122GPL-3.0
  • 4 layers43.2 × 43.2 mmPogobot head, the printed circuit board in 3D

    Pogobot head

    nekonaute/pogobot

    Pogobot is an open-source open-hardware robotic platform for swarm robotics

    140 parts21
  • 2 layers100 × 100 mmI n c u r, the printed circuit board in 3D

    I n c u r

    cyberboy666/i_n_c_u_r

    a r_e_c_u_r video sampler extension circuit - adding knobs, cv and serial midi control

    38 parts16GPL-3.0
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers111.4 × 40.9 mmRainworks Electrical, the printed circuit board in 3D

    Rainworks Electrical

    IceyPlazza/EWB-EPA-Rainworks

    26-27 EWB EPA Rainworks project; We're putting a sensor box in the ground!

    29 parts7
  • 2 layers150 × 69 mmProgramming jig r1.0, the printed circuit board in 3D

    Programming jig r1.0

    butterstick-fpga/programming-jig

    A FT232H based production programming jig for the ButterStick

    50 parts6
  • 2 layers56 × 65 mmDataHat, the printed circuit board in 3D

    DataHat

    challengerjdb/RaspberryPiHat-datalogger

    My name is Jacob Bendell, and I’m a student at the University of Pennsylvania studying Electrical Engineering. I took this past year off from school to avoid online classes and intern at Amped Innovation, a start-up in…

    22 parts6

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP3008-I/P?

Yes. The symbol is Analog_ADC:MCP3008 and the footprint Package_DIP:DIP-16_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP3008-I/P?

PDIP-16, with 16 pins. Its footprint is drawn on this page.

Where is the MCP3008-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP3008-I/P?

JLCPCB lists it as part C2890491, with 53 in stock; the sellers' links on this page open their listings.

What can replace the MCP3008-I/P?

Parts like it in the library: the XD7705B by XINLUDA, the HT7705ANZ by HTCSEMI, the MCP3208-CI/P by Microchip Technology and the MCP3208-BI/P by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP3008-I/P?

123 boards in 101 repositories on GitHub; the most starred are listed on this page, with their KiCad files.