4 layers68 × 89 mm
APC128testboard
frmeier/VFPIX-telescope-PCB
Repository for DTB used in the PSI pixel telescope and VFPIX project
75 parts
4 layers160 × 160 mm
DAQCard2015
frmeier/VFPIX-telescope-PCBRepository for DTB used in the PSI pixel telescope and VFPIX project
- Size
- 160 × 160 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 232
- Nets
- 465
- Pads
- 2,161
- Tracks, vias
- 5,608, 1,106
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 May 2014
- Updated
- 15 Nov 2016
Overview
DAQCard2015 is an open-source printed circuit board by frmeier, from the frmeier/VFPIX-telescope-PCB repository on GitHub. It is a 4-layer board of 160 × 160 mm with 232 parts on 465 nets, routed with 5,608 tracks and 1,106 vias.
It is built around the THS4524IDBTR, AD8534AN and TLC59282DBQ, with the QTH-090-01-F-D-A, MBRA340 and MMBT2222A-TP among its other parts. Its parts include 79 capacitors, 63 resistors, 26 ICs, 26 connectors and 3 diodes.
Main components
9
THS4524IDBTR
TSSOP-38-4.4mm-2.75V~-1.25V、1.25V~2.75V -40℃~+85℃ 0.85uV/℃ 100dB 100dB 100pA/℃ 13ns 180nA 1mA 2.5V~5.5V 2mV 4.6nV/√Hz@100kHz 490V/us 5.5V 950nA 95MHz Differential Enable/shutdown function、Single-ended to differential conversion、Integrated ADC driver、Adjustable output common-mode voltage Four channels Rail-to-Rail Input, Rail-to-Rail Output TSSOP-38-4.4mm Differential Amplifiers ROHSTexas InstrumentsDifferential Amplifiers
AD8534AN
PDIP-14-40℃~+85℃ 1pA 2.7V~6V 20uV/℃ 250mA 25mV 4 45nV/√Hz@1kHz 47dB 50pA 5V/us Overvoltage Protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational AmplifierAnalog DevicesOperational Amplifier
TLC59282DBQ
SSOP-24-150mil-40℃~+85℃ 16 17V 2% 35MHz 3V~5.5V 45mA Built-in SSOP-24-150mil LED Drivers ROHSTexas InstrumentsLED DriversQTH-090-01-F-D-A
SMD,P=0.5mmBoard-To-Board And Backplane ConnectorSamtec
MBRA340
SMA(DO-214AC)-55℃~+150℃ 1 Independent 100A 300uA@40V 3A 40V 450mV@3A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
MMBT2222A-TP
SOT-23-55℃~+150℃ 1 NPN 100 10nA 1V 300MHz 350mW 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSMicro Commercial ComponentsBipolar (BJT)
NMLU1210TW
UDFN-8(4x4)-55℃~+125℃@(Tj) 20V 3.2A 40uA@20V 410mV@2A Single-Phase Rectifier UDFN-8(4x4) Bridge Rectifiers ROHSonsemiBridge RectifiersSBC817-40LT1G-HXY
SOT-23Bipolar (BJT)HXY MOSFETSMAJ75A
SMA-55℃~+150℃ 1 121V 1uA 3.3A 400W 75V 83.3V TVS Unidirectional SMA ESD and Surge Protection (TVS/ESD) ROHShongjiachengUncategorised
Parts
232| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | .1uF | Capacitors_SMD:C_0603 | C2, C10, C11, C12, C13, C15, C16, C17, C18, C19, C21, C22, C23, C24, C25, C27 +36 |
| 32 | Rt | Resistors_SMD:R_0603 | R11, R12, R13, R14, R16, R17, R18, R19, R21, R22, R23, R24, R26, R27, R28, R29 +16 |
| 16 | Rf | extras:R4-MNR04 | RP2, RP3, RP5, RP6, RP8, RP9, RP11, RP12, RP14, RP15, RP17, RP18, RP20, RP21, RP23, RP24 |
| 10 | 10k | Resistors_SMD:R_0603 | R10, R15, R20, R25, R30, R35, R40, R45, R53, R54 |
| 8 | 10uF | Capacitors_SMD:C_0805 | C1, C54, C59, C61, C62, C63, C77, C79 |
| 8 | 2.2uF | Capacitors_SMD:C_0805 | C8, C14, C20, C26, C32, C38, C44, C50 |
| 8 | AD9219 | extras:QFN-48-1EP | U4, U6, U8, U10, U12, U14, U16, U18 |
| 8 | Ri | extras:R8_MNR18 | RP1, RP4, RP7, RP10, RP13, RP16, RP19, RP22 |
| 8 | THS4524IDBTR | extras:TSSOP-38_4.4x9.7mm_Pitch0.5mm | U3, U5, U7, U9, U11, U13, U15, U17 |
| 4 | 10uF | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_Reflow | C58, C60, C73, C74 |
| 4 | R | Resistors_SMD:R_0603 | R50, R51, R52, R62 |
| 2 | 1k | Resistors_SMD:R_0603 | R2, R5 |
| 2 | 470k | Resistors_SMD:R_1206 | R57, R59 |
| 2 | 47uF | Capacitors_Tantalum_SMD:TantalC_SizeD_EIA-7343_Reflow | C57, C75 |
| 2 | 51k | Resistors_SMD:R_1206 | R58, R60 |
| 2 | AD5628 | extras:TSSOP-16_4.4x5mm_Pitch0.65mm | U2, U22 |
| 2 | AD8534 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U19, U23 |
| 2 | LEMO_EPY.00.250.NTN | extras:EPY.00.250.NTN | P4, P5 |
| 2 | QTH-090-01-F-D-A | extras:QTH-090-XX-X-D-A | P1, P2 |
| 1 | 0.47uF | Capacitors_SMD:C_0603 | C56 |
| 1 | 1.8Vana | extras:testpad | P13 |
| 1 | 1.8Vdig | extras:testpad | P14 |
| 1 | 10000pF | Capacitors_SMD:C_0603 | C3 |
| 1 | 100R | Resistors_SMD:R_0603 | R3 |
| 1 | 100k | Resistors_SMD:R_0603 | R48 |
| 1 | 10k | extras:SM31TW+0805 | RV1 |
| 1 | 10k Thermistor | Resistors_SMD:R_0603 | TH1 |
| 1 | 1462042-8 | extras:1462042-8 | K1 |
| 1 | 15k | Resistors_SMD:R_0603 | R47 |
| 1 | 2.4k | Resistors_SMD:R_0603 | R4 |
| 1 | 2.5Vdig | extras:testpad | P17 |
| 1 | 2.7k | Resistors_SMD:R_0603 | R1 |
| 1 | 22nF | Capacitors_SMD:C_1812 | C70 |
| 1 | 22uF | extras:SMD_Cap_8mmDia | C53 |
| 1 | 253R | Resistors_SMD:R_0603 | R56 |
| 1 | 3.3Vana | extras:testpad | P16 |
| 1 | 3.3Vdig | extras:testpad | P15 |
| 1 | 5.6uH | extras:SLF101 | L1 |
| 1 | 50k | Resistors_SMD:R_0805 | R55 |
| 1 | 536k | Resistors_SMD:R_0603 | R49 |
| 1 | 5Vdig | extras:testpad | P12 |
| 1 | 5k1 | Resistors_SMD:R_0603 | R61 |
| 1 | 63.4k | Resistors_SMD:R_0603 | R46 |
| 1 | 680pF | Capacitors_SMD:C_0603 | C55 |
| 1 | 70246-1004 | Pin_Headers:Pin_Header_Straight_2x05 | P11 |
| 1 | Aref_A | extras:testpad | P18 |
| 1 | Aref_B | extras:testpad | P19 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | CASE GND | extras:TE_1217133-1 | P26 |
| 1 | CONN_02X20_Double | extras:N3432-D302RB | P7 |
| 1 | DPDT | extras:DFXX-XX-X-XX-A-X-XX | SW1 |
| 1 | Dialight_5690101372F | extras:Dialight_5690101372F | D1 |
| 1 | FAN | Socket_Strips:Socket_Strip_Straight_1x02 | P6 |
| 1 | FILTER | Resistors_SMD:R_0805 | FB1 |
| 1 | GND | extras:Harwin_D3082-05 | P8 |
| 1 | HV | extras:TE_1217133-1 | P9 |
| 1 | LM1086_1V8 | extras:TO-263-4 | U20 |
| 1 | LM1086_2V5 | extras:TO-263-4 | U25 |
| 1 | LOGO | extras:NLOGO | G*** |
| 1 | LT1913 | extras:LT1913 | U21 |
| 1 | MBRA340 | Diodes_SMD:SMA_Standard | D4 |
| 1 | MCP65R41 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-6 | U24 |
| 1 | MMBT2222A-TP | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q1 |
| 1 | NMLU1210 | extras:NMLU1210 | DB1 |
| 1 | R | Resistors_SMD:R_0603_HandSoldering | R63 |
| 1 | RG_A | extras:testpad | P20 |
| 1 | RG_B | extras:testpad | P21 |
| 1 | RJ45x8 | extras:TE_406967-3 | U1 |
| 1 | SBC817-40LT1G | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q2 |
| 1 | SMAJ75A | Diodes_SMD:SMA_Standard | D2 |
| 1 | TLC59282 | Housings_SSOP:SSOP-24_3.9x8.7mm_Pitch0.635mm | U26 |
| 1 | Vana_A | extras:testpad | P25 |
| 1 | Vana_B | extras:testpad | P24 |
| 1 | Vocm | extras:testpad | P23 |
| 1 | Vthresh | extras:testpad | P22 |
| 1 | miniDIL20 | extras:M50-3101045 | P3 |
The 231 most common of 232 parts.
More from frmeier/VFPIX-telescope-PCB
5- 4 layers70.8 × 70.8 mm
SensorBoard2015
frmeier/VFPIX-telescope-PCB
Repository for DTB used in the PSI pixel telescope and VFPIX project
55 parts - 2 layers28.5 × 22.5 mm
NIM LTB
frmeier/VFPIX-telescope-PCB
Repository for DTB used in the PSI pixel telescope and VFPIX project
33 parts - 4 layers120 × 82.5 mm
Motherboard2015
frmeier/VFPIX-telescope-PCB
Repository for DTB used in the PSI pixel telescope and VFPIX project
25 parts - 4 layers70.8 × 70.8 mm
SensorBoard2013
frmeier/VFPIX-telescope-PCB
Repository for DTB used in the PSI pixel telescope and VFPIX project
16 parts
Similar boards
- 2 layers114.3 × 76.2 mm
XEM8350-BRK MC1
zahapat/fpga-tools-qc
Welcome to the FPGA Environment for Quantum Computing template repository.
53 parts2MIT - 4 layers85.1 × 118.1 mm
- 4 layers123.8 × 362.3 mm
- 4 layers66.3 × 60.9 mm
- 2 layers316 × 222 mm
- 4 layers70 × 72 mm
- 4 layers90 × 40 mm
Usb3-ngff carrier
themainframe/5g-m2-usb3-interface-pcb
KiCad EDA Project for my 5G M.2 (NGFF) USB3 Interface board
62 parts80MIT - 2 layers81.3 × 33.7 mm
SDRReciever
Dizzerin/Software-Defined-Radio
Quadrature sampling down converter software defined radio
67 parts24
Questions
How big is the DAQCard2015 PCB?
It measures 160 × 160 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DAQCard2015 use?
232 parts, built around the THS4524IDBTR, AD8534AN, TLC59282DBQ and QTH-090-01-F-D-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DAQCard2015 KiCad files?
From the frmeier/VFPIX-telescope-PCB repository on GitHub, at the commit this page was made from: the board is DAQCard2015/DAQCard2015.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DAQCard2015 design in my own project?
Its repository states no licence, so its author keeps all rights: ask frmeier before reusing the design.