2 layers72.4 × 91.4 mm
Pedal pi Robin
thawney/PedalPiV2
Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board.
54 parts45GPL-3.0
2 layers139 × 99 mm
G TES touch synth
tomcombriat/G_TES_touch-synth- Size
- 139 × 99 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 121
- Pads
- 383
- Tracks, vias
- 973, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Feb 2023
- Updated
- 8 Aug 2026
Overview
G TES touch synth is an open-source printed circuit board by tomcombriat, from the tomcombriat/G_TES_touch-synth repository on GitHub. It is a 2-layer board of 139 × 99 mm with 90 parts on 121 nets, routed with 973 tracks and 7 vias.
It is built around the MCP3002-I/P and TL072. Its parts include 24 capacitors, 22 resistors, 13 connectors, 8 ICs and 2 switches. It belongs with the audio and music boards and the RP2040 boards of this library.
Main components
2README
README.mdG_TES_touch-synth
Description
Hardware
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4, C5, C6, C7, C17, C18, C19, C20, C21, C22 |
| 7 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R14 |
| 5 | 100n | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C1, C3, C11, C12, C24 |
| 4 | LOGO | pot_dials:pot_dial | G1, G2, G3, Gvol |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R16, R20 |
| 3 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | AudioIn_gain_trim_R_1, RV_gain_trim_L_1, RV_gain_trim_R_1 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12, R13 |
| 2 | 1000p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C13, C14 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18 |
| 2 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21, R22 |
| 2 | 22k (fc10k)/10k (fc16k) | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | 33 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R19 |
| 2 | 680p | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C9, C10 |
| 2 | 680p (op) | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C15, C16 |
| 2 | LOGO | PCB_symbols:owl_7x10 | G***, Gowl2 |
| 2 | LOGO | PCB_symbols:owl_F_50x70 | G_owl1, Gowl_bot |
| 2 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket | U4, U5 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C2 |
| 1 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 1 | 100u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C23 |
| 1 | 10k - POT0 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV3 |
| 1 | 10k - POT1 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV5 |
| 1 | 10k - POT2 | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV4 |
| 1 | 10k - lin - dual | dual_pot:Dual Pot RK1114GH | RV1 |
| 1 | 1N914 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1 |
| 1 | 2.4inches | TFT_Screens:TFT_2.4 | U3 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm_Socket | U7 |
| 1 | AUDIO IN | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J1 |
| 1 | Additional Sensor | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J10 |
| 1 | Batt In | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | EXP 1 | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J8 |
| 1 | EXP 2 | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J7 |
| 1 | LOGO | pot_dials:rot_dial | Grot_enc |
| 1 | MCP3002 | Package_DIP:DIP-8_W7.62mm_Socket | U8 |
| 1 | MIDI IN | MIDI_DIN5:DS-5 MIDI | J3 |
| 1 | MIDI OUT | MIDI_DIN5:DS-5 MIDI | J2 |
| 1 | MIDI THRU | MIDI_DIN5:DS-5 MIDI | J4 |
| 1 | MIDI in TRS | MIDI_TRS:PJ-320B | J12 |
| 1 | MIDI out TRS | MIDI_TRS:PJ-320B | J11 |
| 1 | MIDI thru TRS | MIDI_TRS:PJ-320B | J13 |
| 1 | OUTPUT L - MONO | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J6 |
| 1 | OUTPUT R | Connector_Audio:Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal | J5 |
| 1 | PT8211-pt8211 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Pico | Pi Pico:RPi_Pico_SMD_TH | U2 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SW_SPDT | Package_TO_SOT_THT:TO-126-3_Vertical | SW2 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U6 |
Similar boards
- 2 layers65 × 30 mm
Gardening pHAT
AnaviTechnology/anavi-gardening
ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.
27 parts11 - 4 layers110.9 × 59.7 mm
- 2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT - 2 layers68 × 86.9 mm
NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.
95 parts5CC-BY-SA-4.0 - 2 layers110.9 × 59.5 mm
Procon gcc main pcb
ESCA47/thingamaPRO
Order at your own risk, even i fuck up too often. Maybe poke at me for help but for the most part you are on your own if you do decide to order these.
77 parts4CERN-OHL-S-2.0 - 2 layers125 × 79.4 mm
PHORI 2 0 5
Jwray0/phori_2
Forked from the https://github.com/PhobGCC/PhobGCCv2-HW Project
114 parts3CERN-OHL-S-2.0 - 2 layers125.4 × 84.5 mm
Zinnia2 0 5
plants-tech/Zinnia
fork of a fork of phob 2.x (Phob 2.x Official -> PhloraGCC -> Zinnia)
113 parts2CERN-OHL-S-2.0
Questions
How big is the G TES touch synth PCB?
It measures 139 × 99 mm and has 2 copper layers, 1.6 mm thick.
What parts does the G TES touch synth use?
90 parts, built around the MCP3002-I/P and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the G TES touch synth KiCad files?
From the tomcombriat/G_TES_touch-synth repository on GitHub, at the commit this page was made from: the board is hardware/v1_1/v1_1.kicad_pcb and its schematic hardware/v1/audio_output.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the G TES touch synth design in my own project?
Its repository states no licence, so its author keeps all rights: ask tomcombriat before reusing the design.