2 layers65 × 30 mm
Gardening pHAT
AnaviTechnology/anavi-gardening
ANAVI Gardening uHAT is an open source hardware add-on board for Raspberry Pi that helps you develop smart solutions for monitoring and growing plants.
27 parts11
2 layers72.4 × 91.4 mm
Pedal pi Robin
thawney/PedalPiV245Pedal Pi V2 by Thawney is an all new and regularly maintained Pedal-Pi by electrosmash; a lo-fi programmable guitar pedal that works with the Raspberry Pi ZERO Board. My repository contains all of the information needed to create your own board from scratch unlike Pedal Pi who only share effect code.
- Size
- 72.4 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 61
- Pads
- 153
- Tracks, vias
- 275, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Jul 2022
- Updated
- 21 Jan 2023
Overview
Pedal pi Robin is an open-source printed circuit board by thawney, from the thawney/PedalPiV2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 72.4 × 91.4 mm with 54 parts on 61 nets, routed with 275 tracks and 0 vias.
It is built around the MCP3002-I/P and MCP6002-I/P. Its parts include 16 capacitors, 14 resistors, 4 switches, 2 ICs and 2 connectors. It belongs with the audio and music boards of this library.
Main components
2
MCP3002-I/P
PDIP-8-40℃~+85℃ 10 1LSB 2 2.7V~5.5V 200kHz SPI PDIP-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4K7 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R6, R9, R10, R13, R14 |
| 5 | 6n8 | Capacitors_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C2, C4, C6, C7, C8 |
| 4 | 220u | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C11, C12, C13, C14 |
| 4 | CONN_10pins | Pin_Headers:Pin_Header_Straight_1x10_Pitch2.54mm | CONN1, CONN2, CONN3, CONN4 |
| 2 | 100K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R11 |
| 2 | 100n | Capacitors_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C10, C15 |
| 2 | 1M | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R0, R1 |
| 2 | 4.7K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R15 |
| 2 | 4.7u | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C3, C9 |
| 2 | LOGO | Graphics:Logo 3CM | G***, G*** |
| 2 | LOGO | Graphics:PedalPiText | G***, G*** |
| 2 | SW_PUSH | pedal-pi-footprints:Switch2 | SW2, SW3 |
| 1 | 0.1u | Capacitors_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C1 |
| 1 | 1V6 TP | Wire_Pads:SolderWirePad_single_1mmDrill | +1V6 |
| 1 | 270p | Capacitors_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C5 |
| 1 | 300K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 3V3 TP | Wire_Pads:SolderWirePad_single_1mmDrill | +3v3 |
| 1 | 4.7u | Capacitors_THT:CP_Radial_Tantal_D5.0mm_P2.50mm | C16 |
| 1 | 500K | Potentiometers:Potentiometer_Trimmer_ACP_CA6h_Vertical | RV1 |
| 1 | 50K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 5V TP | Wire_Pads:SolderWirePad_single_1mmDrill | +5v |
| 1 | GND TP | Wire_Pads:SolderWirePad_single_1mmDrill | GND |
| 1 | Guitar_IN | pedal-pi-footprints:StereoJack-NYS216_2 | J1 |
| 1 | LED | LEDs:LED_D3.0mm | D3 |
| 1 | LOGO | Graphics:RLogo 5cm | G*** |
| 1 | LOGO | Graphics:smiley3 | G*** |
| 1 | MCP3002 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | MCP6002 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | OUTPUT | pedal-pi-footprints:StereoJack-NYS216_2 | J2 |
| 1 | SWITCH_3PDT | pedal-pi-footprints:3PDTswitch | SW1 |
| 1 | SWITCH_INV | pedal-pi-footprints:Switch | SW4 |
Similar boards
- 4 layers110.9 × 59.7 mm
- 2 layers100 × 84 mm
Cyclope
RICCIARDI-Adrien/Cyclope
Raspberry Pi powered robot with camera live stream and 360° lidar.
88 parts5MIT - 2 layers68 × 86.9 mm
NBoxRpi
trihome/RasPi_NervesBOX
An extension platform for the Raspberry Pi that mimics the functionality of a PLC.
95 parts5CC-BY-SA-4.0 - 2 layers110.9 × 59.5 mm
Procon gcc main pcb
ESCA47/thingamaPRO
Order at your own risk, even i fuck up too often. Maybe poke at me for help but for the most part you are on your own if you do decide to order these.
77 parts4CERN-OHL-S-2.0 - 2 layers125 × 79.4 mm
PHORI 2 0 5
Jwray0/phori_2
Forked from the https://github.com/PhobGCC/PhobGCCv2-HW Project
114 parts3CERN-OHL-S-2.0 - 2 layers125.4 × 84.5 mm
Zinnia2 0 5
plants-tech/Zinnia
fork of a fork of phob 2.x (Phob 2.x Official -> PhloraGCC -> Zinnia)
113 parts2CERN-OHL-S-2.0 - 2 layers50.2 × 34.9 mm
Questions
How big is the Pedal pi Robin PCB?
It measures 72.4 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pedal pi Robin use?
54 parts, built around the MCP3002-I/P and MCP6002-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pedal pi Robin KiCad files?
From the thawney/PedalPiV2 repository on GitHub, at the commit this page was made from: the board is PCB_Files/Through Hole/Kikad_Files/pedal-pi-Robin.kicad_pcb and its schematic PCB_Files/SMD/PedalPiSMD/PedalPiSMD-backups/PedalPiSMD-2022-07-19_092623/PedalPiSMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pedal pi Robin design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).