4 layers110.9 × 59.7 mm
4 layers110.9 × 59.7 mm
Procon gcc main pcb
HandHeldLegend/ProGCC-V3-HW6- Size
- 110.9 × 59.7 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 106
- Nets
- 96
- Pads
- 400
- Tracks, vias
- 1,272, 232
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 29 Jul 2023
- Updated
- 20 Dec 2023
Overview
Procon gcc main pcb is an open-source printed circuit board by HandHeldLegend, from the HandHeldLegend/ProGCC-V3-HW repository on GitHub. It is a 4-layer board of 110.9 × 59.7 mm with 106 parts on 96 nets, routed with 1,272 tracks and 232 vias.
It is built around the RP2040, MCP3002-I/P and W25Q128JVSIQ, with the BSS138, CUS08F30 and AO3400A among its other parts. Its parts include 25 resistors, 19 capacitors, 11 ICs, 9 inductors and 6 transistors. It belongs with the RP2040 boards of this library.
Main components
11
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
MCP3002-I/P
PDIP-8-40℃~+85℃ 10 1LSB 2 2.7V~5.5V 200kHz SPI PDIP-8 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
CUS08F30
SOD-323Schottky DiodesDOWOAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
MIP25202R2MBE
10081.3A 2.2uH 80mΩ ±20% 1008 Inductors (SMD) ROHSINPAQInductors (SMD)
CSTNE12M0GH5L000R0
SMD3213-3P-40℃~+85℃ 12MHz 30Ω 33pF SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
TS-1187A-B-A-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.5mm 1.6N 100,000 cycles 12V 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile Switches
TS35CA
SMD,4.5x3.3mm-20℃~+70℃ 100,000 Cycles 12V 2.5N 3.3mm 3.4mm 4.45mm 50mA No Round Button SMD(SMT) Tab SPST Surface Mount, Right Angle White Without Bracket SMD,4.5x3.3mm Tactile Switches ROHSSHOU HANTactile Switches
README
README.mdProGCC V3 HW
This is the official Github page for the ProGCC V3 hardware from Hand Held Legend.
PCB Design License
This PCB design (includes the layout of traces, footprints, and PCB board layout) is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.
PCB Schematic License
This PCB schematic is licensed under a CERN-OHL-S Strongly Reciprocal License.
It contains elements derived from PhobGCC Hardware including the rumble schematic and choice of ADCs.
Shop Links
Detailed Information
All of our guides on assembly, updating the firmware, and operation are listed on our Wiki page linked here.
Features
- TBA
Attributions
- Partial trace layout work and initial prototyping performed by Esca.
- Main PCB, button board PCB, and bulk schematic designed by Mitch Cairns.
- Rumble schematic derived from work created by the PhobGCC Team.
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP14, TP15, TP16 |
| 8 | SK6805-EC-15 | progcc_v3:SK6805-EC-15 | L1, L2, L3, L4, L5, L6, L7, L8 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C13, C17, C18, C21, C22 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R14, R15, R16, R17, R18, R19 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R10, R11, R12, R13 |
| 4 | .047u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10, C11, C12 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C14 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R3, R5, R21 |
| 4 | 36-8730 | progcc_v3:KS_8730 | T1, T2, T3, T4 |
| 4 | GH39F (Hall SOT23) | progcc_v3:GH39F | U1, U2, U3, U4 |
| 3 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6 |
| 3 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2, F3 |
| 2 | 100R | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R29, R30 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | CUS08F30 | Diode_SMD:D_SOD-323_HandSoldering | D2, D4 |
| 2 | GL18_SW | progcc_v3:GL18 | SW1, SW2 |
| 2 | MCP3002 | progcc_v3:SOIC-8_3.9x4.9mm_P1.27mm | U8, U10 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | ST_LSM6 | progcc_v3:LGA14 | U5, U11 |
| 1 | 1.3A 2.2uH ±20% 80mΩ | Inductor_SMD:L_1008_2520Metric | L9 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric | R23 |
| 1 | 100n | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 47uF 6.3v | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3 |
| 1 | 500K | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J5 |
| 1 | Conn_01x06_Female | progcc_v3:GCC_Header_Straight_1x06_Pitch2.00mm | J4 |
| 1 | Crystal_GND3 | Crystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Endpoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | P1 |
| 1 | M7C | Diode_SMD:D_SOD-123 | D1 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U6 |
| 1 | TPS630001RCR | hhl:VREG_V62_16624-01YE | U7 |
| 1 | TS-1187A-B-A-B | progcc_v3:SW_TS-1187A-B-A-B | SW3 |
| 1 | TS35CA | progcc_v3:TS35CA | SW4 |
| 1 | To Button Board | progcc_v3:molex_5051101492_14P | J3 |
| 1 | USB_C_Receptacle | progcc_v3:Shou Han Type-C 24P QCHT | J9 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U9 |
The 105 most common of 106 parts.
Similar boards
- 4 layers125.7 × 76.5 mm
UGC Main
HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
128 parts62 - 4 layers125.5 × 47.1 mm
- 2 layers25.9 × 70.1 mm
- 4 layers125.5 × 45.6 mm
- 4 layers125.7 × 65.9 mm
UGC OpenMain
HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.
117 parts3AGPL-3.0 - 4 layers45.3 × 26 mm
GCP-2
HandHeldLegend/GC-Adapter-RP2040
The 3D shell and buttons are licensed under a Creative Commons Attribution 4.0 International License .
47 parts24 - 4 layers55 × 100.5 mm
OSS Radio Hardware Design
Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.
256 parts72
Questions
How big is the Procon gcc main pcb PCB?
It measures 110.9 × 59.7 mm and has 4 copper layers, 1 mm thick.
What parts does the Procon gcc main pcb use?
106 parts, built around the RP2040, MCP3002-I/P, W25Q128JVSIQ and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Procon gcc main pcb KiCad files?
From the HandHeldLegend/ProGCC-V3-HW repository on GitHub, at the commit this page was made from: the board is progcc_v3_main/procon_gcc_main_pcb.kicad_pcb and its schematic progcc_v3_main/procon_gcc_main_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Procon gcc main pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask HandHeldLegend before reusing the design.