
UGC SubStick
HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.

Fully open, bare-bones GC Ultimate PCB made for makers and indies.
UGC OpenMain is an open-source printed circuit board by HandHeldLegend, from the HandHeldLegend/Open-GC-Ultimate repository on GitHub, published under the AGPL-3.0 licence. It is a 4-layer board of 125.7 × 65.9 mm with 117 parts on 94 nets, routed with 1,410 tracks and 247 vias.
It is built around the RP2040, MCP3002-I/MS and GD25Q80EEIGR, with the RD7091008A, CC0402KRX7R5BB104 and BAS16VY,115-JSM among its other parts. Its parts include 23 resistors, 23 switches, 21 capacitors, 14 diodes and 11 connectors. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C10, C11, C24, C25, C32 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R12, R25, R28 |
| 6 | 4015-0-43-80-30-27-10-0 | hhl:4015-0-43-80-30-27-10-0 | S1, S2, S3, S4, S5, S6 |
| 6 | BAS16VY,115 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D4, D5, D8, D11, D12, D13 |
| 6 | M7C | Diode_SMD:D_SOD-523 | D3, D6, D7, D14, D15, D16 |
| 6 | ModConnect | TestPoint:TestPoint_Pad_D1.5mm | X1, X2, X3, X4, X5, X6 |
| 6 | SW_TS-1187A | hhl:TS-1187A-C-E-B | SW5, SW9, SW14, SW17, SW18, SW19 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C26, C27, C33, C34 |
| 4 | 0R | Resistor_SMD:R_0402_1005Metric | R33, R34, R35, R41 |
| 4 | 75k | Resistor_SMD:R_0402_1005Metric | R4, R36, R37, R38 |
| 4 | SW_Push | hhl:ring_dpad | SW10, SW11, SW12, SW13 |
| 4 | SW_Push | hhl:ring_pad | SW1, SW2, SW3, SW4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP6, TP7 |
| 3 | 100R | Resistor_SMD:R_0402_1005Metric | R3, R32, R40 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R31, R39 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C23 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 27R | Resistor_SMD:R_0201_0603Metric | R6, R7 |
| 2 | 47nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 503480-0640 | hhl:5034800640 | J2, J13 |
| 2 | CUS08F30 | Diode_SMD:D_SOD-323_HandSoldering | D9, D10 |
| 2 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J8, J9 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J3, J4 |
| 2 | MCP3002 | Package_SO:MSOP-8_3x3mm_P0.65mm | U6, U7 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | SM02B-SURS-TF_LF__SN_ | hhl:JST_SM02B-SURS-TF_LF__SN_ | J1, J10 |
| 2 | SW_Push | hhl:Z_Switch_Edge_Omron | SW7, SW8 |
| 2 | Slider_GCC-Gamecube_MB | hhl:GCC_Slider_MillMaxSocketed | RV1, RV2 |
| 2 | Trigger | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6, J7 |
| 1 | 1.3A 2.2uH ±20% 80mΩ | Inductor_SMD:L_1008_2520Metric | L5 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A | C3 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | BSS138DW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J11 |
| 1 | GD25Q80EEIGR | hhl:USON-8-EP(2x3) | U9 |
| 1 | GL18_SW | hhl:GL1807SYAE | SW6 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U8 |
| 1 | SK6805-EC-15 | hhl:SK6805-EC-15 | L6 |
| 1 | TPS630001RCR | hhl:VREG_V62_16624-01YE | U4 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
The 116 most common of 117 parts.

HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.

HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.

HandHeldLegend/Open-GC-Ultimate
Fully open, bare-bones GC Ultimate PCB made for makers and indies.

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .



HandHeldLegend/Latte-Jr-HW
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .


jakeread/knuckles-imu-lsm6-lis2-rp2354a
This is an IMU module that pairs the LSM6DSV16X accelerometer with an LIS2MDL magnetometer, using an RP2354A microcontroller.


It measures 125.7 × 65.9 mm and has 4 copper layers, 1.6 mm thick.
117 parts, built around the RP2040, MCP3002-I/MS, GD25Q80EEIGR and RD7091008A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HandHeldLegend/Open-GC-Ultimate repository on GitHub, at the commit this page was made from: the board is HW/Main/UGC_OpenMain.kicad_pcb and its schematic HW/Main/UGC_OpenMain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).