

Clock pcb
- Size
- 66 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 46
- Pads
- 224
- Tracks, vias
- 620, 242
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Dec 2023
- Updated
- 3 Oct 2026
Overview
Clock pcb is an open-source printed circuit board by themkoi, from the themkoi/esp32-alarm-clock repository on GitHub. It is a 2-layer board of 66 × 42 mm with 61 parts on 46 nets, routed with 620 tracks and 242 vias.
It is built around the TLV75533PDBV, TPS2116DRL and TL3305AF160QG, with the B3F-5050, SD0805S040S0R5 and FDN304PZ among its other parts. Its parts include 15 connectors, 12 resistors, 11 capacitors, 6 ICs and 2 diodes. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
7TLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS2116DRL
SOT-583Operating status indication SOT-583 Power Management - Specialized ROHSTexas InstrumentsPower Distribution SwitchesTL3305AF160QG
SMD-4P,4.5x4.5mm-20℃~+70℃ 1.6N 12V 3.8mm 4.5mm 4.5mm 500,000 Cycles 50mA Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,4.5x4.5mm Tactile Switches ROHSE-SwitchTactile SwitchesB3F-5050
DIP-25℃~+70℃ 1.27N 12mm 12mm 24V 50mA 7.3mm Blue No PC Pin SPST-NO Square Button Through Hole Without Bracket DIP Tactile Switches ROHSOmronTactile SwitchesSD0805S040S0R5
0805100uA@40V 40V 480mV@500mA 500mA 0805 Schottky Diodes ROHSKyocera AVXSchottky DiodesFDN304PZ
SOT-23-55℃~+150℃ 1 P-Channel 1.31nF 1.5V 106pF 2.4A 20V 20nC@4.5V 500mW 52mΩ@4.5V SOT-23 MOSFETs ROHSonsemiMOSFETsFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x01_Socket | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J7, J9, J10, J11, J12, J13, J14 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C9, C10, C11 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 3 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP7 |
| 3 | TL3305AF160QG | clock:TL3305AF160QG | BATT_P1, BOOT1, EN1 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 800k | Resistor_SMD:R_0402_1005Metric | R3, R10 |
| 2 | B3F-5050 | clock:B3F-4055 | S3, S4 |
| 2 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8, J15 |
| 2 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J5, J6 |
| 2 | SD0805S040S0R5 | Diode_SMD:D_0805_2012Metric | D3, D4 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2.7K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 300k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 500k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 50k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | Conn_01x02_Socket | clock:SHDR2W64P0X250_1X2_740X575X700P | USB_BOARD1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U1 |
| 1 | FDN304PZ | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | FS8205A | clock:SOP65P640X120-8N | Q1 |
| 1 | Jumper_bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP3 |
| 1 | Led display | clock:tm1637_module | J3 |
| 1 | Led display 2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | MCP73811T-420I-OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TPS2116DRL | Package_TO_SOT_SMD:SOT-583-8 | U4 |
| 1 | oled | clock:SSD1306_0.96_Oled | J2 |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | AO9926C1 |
| 1 | ~ | clock:SOT95P280X140-6N | U2 |
| 1 | ~ | clock:SHDR2W64P0X250_1X2_740X575X700P | U3 |
More from themkoi/esp32-alarm-clock
5- 2 layers69.4 × 89.9 mm

- 2 layers51 × 18.3 mm

- 2 layers99 × 60 mm

- 2 layers13.4 × 20 mm

- 2 layers51 × 18.3 mm

Similar boards
- 4 layers33.8 × 38 mm

- 4 layers50.8 × 53.3 mm

- 4 layers83 × 50 mm

- 2 layers108 × 50.3 mm

- 2 layers200 × 250 mm

- 2 layers354 × 295.1 mm

SV PWM card R01
mariusenglund/three-phase-inverter
Materials for enhancing the DC-to-AC converter that was designed as part of our bachelor's thesis in the spring of 2023.
257 parts2GPL-3.0 - 2 layers40 × 50 mm

- 2 layers40 × 50 mm

Questions
How big is the Clock pcb PCB?
It measures 66 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock pcb use?
61 parts, built around the TLV75533PDBV, TPS2116DRL, TL3305AF160QG and B3F-5050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock pcb KiCad files?
From the themkoi/esp32-alarm-clock repository on GitHub, at the commit this page was made from: the board is clock-pcb/clock-pcb.kicad_pcb and its schematic clock-pcb/clock-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask themkoi before reusing the design.