Skip to the content
4 layers83 × 50 mmController, the printed circuit board in 3D

A furnace used to solder pieces on a PCB

Size
83 × 50 mm
Copper layers
4
Thickness
1.6 mm
Parts
25
Nets
21
Pads
78
Tracks, vias
93, 19
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
25 Feb 2025
Updated
25 Feb 2025

Overview

Controller is an open-source printed circuit board by 15guim, from the 15guim/002_SMDFurnace repository on GitHub. It is a 4-layer board of 83 × 50 mm with 25 parts on 21 nets, routed with 93 tracks and 19 vias.

It is built around the LM321, ALZ51B05W and SD0805S040S0R5. Its parts include 7 connectors, 4 capacitors, 4 resistors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

002_SMDFurnace

A furnace used to solder pieces on a PCB

Parts

25
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopBottomH1, H2, H3, H4
20.1uCapacitor_SMD:C_0603_1608MetricC1, C4
210kCapacitor_SMD:C_0603_1608MetricR1, R3
10.2uCapacitor_SMD:C_0603_1608MetricC3
1100Resistor_SMD:R_0603_1608MetricR2
110uCapacitor_SMD:C_0603_1608MetricC2
1120kResistor_SMD:R_0603_1608MetricR4
1ALZ51B05WCustom_footprints:ALZ51B05WK1
1Comm_Conn1Custom_footprints:PHY_comm_diffV1J2
1Comm_Conn2Custom_footprints:PHY_comm_diffV1J4
1Conn_ThermoConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Debug portConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ5
1GSFC0201Package_TO_SOT_SMD:SOT-23-3Q1
1LM321Package_TO_SOT_SMD:SOT-23-5U3
1LOGOLOGOG***
1L_inCustom_footprints:Pad_14AWG_TopBottom_customJ6
1L_outCustom_footprints:Pad_14AWG_TopBottom_customJ7
1Power_ConnConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1SD0805S040S0R5Diode_SMD:D_0805_2012MetricD1
1STM32C011J4MxPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1

Similar boards

  • 4 layers50.8 × 53.3 mmBadgeKittyv2, the printed circuit board in 3D

    BadgeKittyv2

    Fuse-Technical-Group/BadgeKitty

    Codebase for BadgeKitty conference badge

    32 parts4
  • 2 layers69.4 × 89.9 mmPanel, the printed circuit board in 3D

    Panel

    themkoi/esp32-alarm-clock

    94 parts2
  • 2 layers108 × 50.3 mmGardenGate Mouser, the printed circuit board in 3D

    GardenGate Mouser

    henrikkoch/GardenGatePCB

    Garden Gate PCB

    42 partsMIT
  • 2 layers200 × 250 mmControl board, the printed circuit board in 3D

    Control board

    MahimashreePrabhakar/General-control-board_Test

    113 parts
  • 2 layers36.5 × 56 mmFoc driver, the printed circuit board in 3D

    Foc driver

    sirojudinMunir/sf-motion

    Open-source Motion Control Platform

    132 parts135MIT
  • 4 layers17.5 × 35 mmKungFuSID, the printed circuit board in 3D

    KungFuSID

    Sgw32/KungFuSID

    Kung Fu SID is a firmware based on Kung Fu Flash which allows SID emulation

    35 parts65
  • 2 layers13 × 10.2 mmNoise guy, the printed circuit board in 3D

    Noise guy

    kinoshita-lab/noise-guy

    noise generator made by ATTiny10

    16 parts10MIT

Questions

How big is the Controller PCB?

It measures 83 × 50 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Controller use?

25 parts, built around the LM321, ALZ51B05W and SD0805S040S0R5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller KiCad files?

From the 15guim/002_SMDFurnace repository on GitHub, at the commit this page was made from: the board is Elec/Controller.kicad_pcb and its schematic Elec/Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask 15guim before reusing the design.