

Control board
- Size
- 200 × 250 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 176
- Pads
- 478
- Tracks, vias
- 507, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Oct 2024
- Updated
- 3 Dec 2024
Overview
Control board is an open-source printed circuit board by MahimashreePrabhakar, from the MahimashreePrabhakar/General-control-board_Test repository on GitHub. It is a 2-layer board of 200 × 250 mm with 113 parts on 176 nets, routed with 507 tracks and 30 vias.
It is built around the TMC2209SILENTSTEPSTICK, SD0805S040S0R5 and IRLB8721PBF, with the M80-5402642 among its other parts. Its parts include 28 resistors, 23 capacitors, 22 connectors, 16 diodes and 10 ICs.
Main components
4TMC2209SILENTSTEPSTICK
-Power Management - Modules ROHSTRINAMIC Motion Control GmbHModulesSD0805S040S0R5
0805100uA@40V 40V 480mV@500mA 500mA 0805 Schottky Diodes ROHSKyocera AVXSchottky DiodesIRLB8721PBF
TO-220AB-55℃~+175℃ 1 N-channel 1.077nF 110pF 13nC@4.5V 16mΩ@4.5V 2.35V 30V 360pF 62A 65W N-Channel ±20V TO-220AB MOSFETs ROHSInfineon TechnologiesMOSFETsM80-5402642
弯插,P=2mm-55℃~+125℃ 13 2 2.2A 26P 2mm 2mm 2x13P 800V Black Gold Phosphor bronze Through Hole UL94V-0 弯插,P=2mm Wire To Board Connector ROHSHarwinWire To Board Connector
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 2.2uF 100V 1210 | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C601, C602, C603, C604, C605, C606, C607, C608, C609, C610, C611, C612, C613, C614, C615, C616 |
| 6 | LED | LED_SMD:LED_0805_2012Metric | D601, D602, D603, D604, D605, D606 |
| 6 | SD0805S040S0R5 | Diode_SMD:D_0805_2012Metric | D401, D402, D501, D502, D503, D504 |
| 5 | 330R | Resistor_SMD:R_0805_2012Metric | R607, R608, R609, R610, R611 |
| 5 | 47K | Resistor_SMD:R_0805_2012Metric | R403, R404, R407, R408, R601 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric | R401, R402, R405, R406 |
| 4 | 2.33K | Resistor_SMD:R_0805_2012Metric | R602, R603, R604, R605 |
| 4 | 470R | Resistor_SMD:R_0805_2012Metric | R612, R613, R614, R615 |
| 4 | MAGIC-LDHM_172946001 | footprints:MAGIC-LDHM_172946001 | U601, U602, U603, U604 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H301, H302, H303, H304 |
| 4 | PULL DOWN | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP601, JP602, JP603, JP604 |
| 4 | TMC2209_SILENTSTEPSTICK | footprints:MODULE_TMC2209_SILENTSTEPSTICK | U501, U502, U503, U504 |
| 4 | TPSD107K010H0065 | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C501, C502, C503, C504 |
| 3 | R | Resistor_SMD:R_0805_2012Metric | R409, R411, R412 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP401, TP402 |
| 1 | 0.47Uf | Capacitor_SMD:C_0805_2012Metric | C302 |
| 1 | 10Nf | Capacitor_SMD:C_0805_2012Metric | C301 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric | R301 |
| 1 | 2604-1104 | footprints:CONN4_2604-1104_WAG | J501 |
| 1 | 330 R | Resistor_SMD:R_0805_2012Metric | R606 |
| 1 | 33Uf | Capacitor_SMD:C_0805_2012Metric | C303 |
| 1 | 860R | Resistor_SMD:R_0805_2012Metric | R410 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D404 |
| 1 | EXTRUDER 1 M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J502 |
| 1 | EXTRUDER 2 M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J503 |
| 1 | FEED 1 M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J504 |
| 1 | FEED 2 M | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J505 |
| 1 | FLOW SENSOR 1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J401 |
| 1 | FLOW SENSOR 2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J403 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D405 |
| 1 | HEATER | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J603 |
| 1 | IRLB8721PBF | Package_TO_SOT_THT:TO-220-3_Vertical | Q601 |
| 1 | LED 1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J601 |
| 1 | LED 2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J604 |
| 1 | LED 3 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J602 |
| 1 | LED 4 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J605 |
| 1 | LIGHT BARRIER 1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J402 |
| 1 | LIGHT BARRIER 2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J404 |
| 1 | LIGHT BARRIER 3 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J405 |
| 1 | LIGHT BARRIER 4 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J407 |
| 1 | LL1 OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J606 |
| 1 | LL2 OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J608 |
| 1 | LL3 OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J607 |
| 1 | LL4 OUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J609 |
| 1 | LM3940IMP-3.3_NOPB | footprints:VREG_LM3940IMP-3.3_NOPB | VR301 |
| 1 | M80-5402642 | footprints:HARWIN_M80-5402642 | J301 |
| 1 | NUCLEO-H753ZI | Nucleo-H753ZI:MODULE_NUCLEO-H753ZI | U201 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D403 |
| 1 | SJ1_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP301 |
| 1 | SJ2_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP302 |
| 1 | THERMOCOUPLE 1 | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J406 |
| 1 | THVD1330DR | footprints:SOIC127P600X175-8N | IC301 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D406 |
Similar boards
- 4 layers50.8 × 53.3 mm

- 2 layers69.4 × 89.9 mm

- 4 layers83 × 50 mm

- 2 layers108 × 50.3 mm

- 2 layers90.8 × 35.6 mm

ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers113.4 × 55.3 mm

- 2 layers92.5 × 62.5 mm

DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 4 layers130.5 × 171 mm

UniMixBase
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
157 parts6
Questions
How big is the Control board PCB?
It measures 200 × 250 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control board use?
113 parts, built around the TMC2209SILENTSTEPSTICK, SD0805S040S0R5, IRLB8721PBF and M80-5402642. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control board KiCad files?
From the MahimashreePrabhakar/General-control-board_Test repository on GitHub, at the commit this page was made from: the board is Hardware/Kicad files/Control board.kicad_pcb and its schematic Hardware/Kicad files/AUX CONTROLS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control board design in my own project?
Its repository states no licence, so its author keeps all rights: ask MahimashreePrabhakar before reusing the design.