Skip to the content
1122

TL3305AF160QG

E-SwitchExtended

-20℃~+70℃ 1.6N 12V 3.8mm 4.5mm 4.5mm 500,000 Cycles 50mA Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,4.5x4.5mm Tactile Switches ROHS

Part id
e-switch/TL3305AF160QG
Category
Tactile Switches
Package
SMD-4P,4.5x4.5mm
Pins
4
In stock
379 at JLCPCB (C2886899)
Used on
17 open-source boards

Overview

The TL3305AF160QG is a tactile Switche made by E-Switch in a SMD-4P,4.5x4.5mm package with 2 pins. -20℃~+70℃ 1.6N 12V 3.8mm 4.5mm 4.5mm 500,000 Cycles 50mA Black Gull Wing Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,4.5x4.5mm Tactile Switches ROHS.

PCBKit's library has its KiCad symbol (Switches:PB SPST 1C-2NO, from CERN's library) and its footprint (Button_Switch_SMD:SW_SPST_TL3305A, from KiCad's library), ready for a KiCad board. 379 are in stock at JLCPCB (part C2886899). 17 open-source boards in 11 repositories on GitHub use it.

Symbol

Switches:PB SPST 1C-2NOFrom CERN's library

Footprint

1122
Button_Switch_SMD:SW_SPST_TL3305AFrom KiCad's library

Pinout

2
The pins of the TL3305AF160QG
PinNameType
1CInput/output
2NOInput/output

Open-source boards using it

17See all 17
  • 2 layers82.7 × 30.5 mmCH32Console, the printed circuit board in 3D

    CH32Console

    max7d3/CH32V003-MiniGameConsole

    Despite memory limitations, it runs games with full 16-bit color\ graphics at 30 FPS (It can technically hit 60 FPS in all example games, but I designed them for 30, so I locked it there.) It supports either terminal…

    37 parts7Apache-2.0
  • 2 layers70 × 55 mmCapsicum, the printed circuit board in 3D

    Capsicum

    hutscape/capsicum

    🫑 Retrofit a wired doorbell to add WiFi and make it connected 🔔

    80 parts2
  • 2 layers69.4 × 89.9 mmPanel, the printed circuit board in 3D

    Panel

    themkoi/esp32-alarm-clock

    94 parts2
  • 4 layers44 × 44 mmBoot console, the printed circuit board in 3D

    Boot console

    clarkmcc/my-first-linux-board

    my-first-linux-board is a small F1C200S Linux board built around removable microSD storage, USB-C power and USB device data, a 3.3 V UART console, and power/status LEDs.

    93 parts1
  • 2 layers58.2 × 73.7 mmSTM32U5A5-min circuit, the printed circuit board in 3D

    STM32U5A5-min circuit

    Bobrowicz/STM32U5A5-min-circuit-dev-board

    Breakout board for STM32U5A5VJT6

    28 parts
  • 2 layers72 × 49 mmAstro orient pcb, the printed circuit board in 3D

    Astro orient pcb

    dlllonb/astro-orient

    code for a modular astro orientation PCB based project

    45 parts
  • 2 layers141 × 90.9 mmHaptic bracelet, the printed circuit board in 3D

    Haptic bracelet

    earlynerd/ELRS-haptics

    Battery-powered attitude feedback for FPV flying, with eight haptic actuators around each wrist. An ESP32-C6 receives telemetry over ESP-NOW and controls eight M2003FC1AE/DRV2625 pods using the music robot's UART ring…

    269 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TL3305AF160QG?

Yes. The symbol is Switches:PB SPST 1C-2NO and the footprint Button_Switch_SMD:SW_SPST_TL3305A, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TL3305AF160QG?

SMD-4P,4.5x4.5mm, with 2 pins. Its footprint is drawn on this page.

Where is the TL3305AF160QG datasheet?

E-Switch publishes it: the Datasheet link on this page opens it.

Where can I order the TL3305AF160QG?

JLCPCB lists it as part C2886899, with 379 in stock; the sellers' links on this page open their listings.

What can replace the TL3305AF160QG?

Parts like it in the library: the TL3305AF260QG by E-Switch, the TL3305CF160QG by E-Switch and the TL3305BF160QG by E-Switch. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TL3305AF160QG?

17 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.