Skip to the content
1122

TL3305AF260QG

E-SwitchExtended

-20℃~+70℃ 12V 2.6N 200,000 cycles 3.8mm 4.5mm 4.5mm 50mA Gull Wing Red Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,4.5x4.5mm Tactile Switches ROHS

Part id
e-switch/TL3305AF260QG
Category
Tactile Switches
Package
SMD-4P,4.5x4.5mm
Pins
4
In stock
8,454 at JLCPCB (C2886902)
Used on
13 open-source boards

Overview

The TL3305AF260QG is a tactile Switche made by E-Switch in a SMD-4P,4.5x4.5mm package with 4 pins. -20℃~+70℃ 12V 2.6N 200,000 cycles 3.8mm 4.5mm 4.5mm 50mA Gull Wing Red Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,4.5x4.5mm Tactile Switches ROHS.

PCBKit's library has its footprint (Button_Switch_SMD:SW_SPST_TL3305A, from KiCad's library), ready for a KiCad board. 8,454 are in stock at JLCPCB (part C2886902). 13 open-source boards in 12 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

1122
Button_Switch_SMD:SW_SPST_TL3305AFrom KiCad's library

Open-source boards using it

13See all 13
  • 4 layers91 × 53.1 mmNff pcb, the printed circuit board in 3D

    Nff pcb

    o7-machinehum/flipper-blackhat

    Linux based WiFi pentesting device for the Flipper Zero.

    184 parts300
  • 4 layers89 × 54.5 mmESP32 sensor board, the printed circuit board in 3D

    ESP32 sensor board

    andreschaparro/udemy-advanced-pcb-design-with-kicad-9

    93 parts1
  • 2 layers153 × 95.8 mmSpekky Matrix, the printed circuit board in 3D

    Spekky Matrix

    jc-SpaceXp/Spekky-Matrix

    Spectrum analyser displayed on a LED matrix board connected to a STM32 device

    390 parts1MIT
  • 2 layers61 × 35 mmEsp32-1pcb, the printed circuit board in 3D

    Esp32-1pcb

    shubhisgonnastealyourcode/FT-32-esp32-s3-dev-board-

    Custom ESP32-S3 Development Board with Header Pins for Display and RGB LED

    44 parts1
  • 4 layers58.4 × 35.6 mmE e paper, the printed circuit board in 3D

    E e paper

    hamuelbones/e-e-paper

    An ESP32-C-based internet-connected decorative e-paper display

    63 parts
  • 2 layers35 × 55 mmCoral ir, the printed circuit board in 3D

    Coral ir

    mineiwik/coral-ir

    Smart infrared transmitter

    31 partsMIT
  • 4 layers115 × 107 mmIC 001 - Low Cost Audio Sensor, the printed circuit board in 3D

    IC 001 - Low Cost Audio Sensor

    ryanstevensmith/locust_hardware

    The electronics repository for the locust project by Imperial College

    174 partsCERN-OHL-P-2.0

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the TL3305AF260QG?

Yes. the footprint Button_Switch_SMD:SW_SPST_TL3305A, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TL3305AF260QG?

SMD-4P,4.5x4.5mm, with 4 pins. Its footprint is drawn on this page.

Where is the TL3305AF260QG datasheet?

E-Switch publishes it: the Datasheet link on this page opens it.

Where can I order the TL3305AF260QG?

JLCPCB lists it as part C2886902, with 8,454 in stock; the sellers' links on this page open their listings.

What can replace the TL3305AF260QG?

Parts like it in the library: the TL3305AF160QG by E-Switch, the TL3305CF160QG by E-Switch and the TL3305BF160QG by E-Switch. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TL3305AF260QG?

13 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.