
SV PWM card R01
mariusenglund/three-phase-inverter
Materials for enhancing the DC-to-AC converter that was designed as part of our bachelor's thesis in the spring of 2023.

0038 POT Module Classic is an open-source printed circuit board by AirchipTeknoloji, from the AirchipTeknoloji/0038_POT_Module_Classic repository on GitHub. It is a 2-layer board of 40 × 50 mm with 15 parts on 35 nets, routed with 61 tracks and 12 vias.
It is built around the B3F-5050. Its parts include 7 resistors, 3 diodes, 2 switches and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R3, R4, R6, R7 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R5 |
| 2 | B3F-5050 | meminle:B3F-4055 | S1, S2 |
| 2 | R_Potentiometer | meminle:RK09D113F25C0B504 | RV1, RV2 |
| 1 | ~ | Moduler_:pin_header_5-3 | U1 |

mariusenglund/three-phase-inverter
Materials for enhancing the DC-to-AC converter that was designed as part of our bachelor's thesis in the spring of 2023.





google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
It measures 40 × 50 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the B3F-5050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AirchipTeknoloji/0038_POT_Module_Classic repository on GitHub, at the commit this page was made from: the board is 0038_POT_Module_Classic.kicad_pcb and its schematic 0038_POT_Module_Classic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AirchipTeknoloji before reusing the design.