
Flight controller rev2
shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.
Flight controller is an open-source printed circuit board by shazmeenShz, from the shazmeenShz/ESP32-Flight-Controller repository on GitHub, published under the MIT licence. It is a 4-layer board of 66.5 × 47 mm with 48 parts on 79 nets, routed with 547 tracks and 44 vias.
It is built around the CH340C, ESP32-WROOM-32E and AMS1117-3.3, with the MPU-6050, SS34 and WS2812B among its other parts. Its parts include 14 capacitors, 11 resistors, 6 connectors, 4 ICs and 3 diodes. It belongs with the robots and motor control and home automation and IoT boards and the ESP32 boards of this library.
A 4-layer ESP32 flight-controller PCB, designed in KiCad 8 and manufactured as Rev 2.
The board is built around an ESP32-WROOM-32E. It takes a LiPo on an XT30, makes 5 V with an MP1584 and 3.3 V with an AMS1117, and brings out USB-C programming, an MPU-6050, GPS, and receiver headers. This repository is the hardware: schematics, PCB, Gerbers, BOM, and photos. There is no flight firmware here.
| MCU | ESP32-WROOM-32E (Wi-Fi and Bluetooth) |
| IMU | MPU-6050, I²C |
| USB | Type-C, CH340C USB-UART |
| Battery | LiPo on XT30 (J1) |
| 5 V | MP1584 buck (U6) |
| 3.3 V | AMS1117-3.3 (U2) |
| Status | WS2812B and an active buzzer |
| Buttons | BOOT (SW2) and RESET (SW1) |
| Board | 4-layer, 1.6 mm |
| CAD | KiCad 8 |
Power path:
LiPo (XT30) → MP1584 → 5 V → AMS1117-3.3 → 3.3 V → ESP32Copper is 1 oz (0.035 mm) on all four layers. The Rev 2 Gerbers name the inner layers GND and POWER.
| Ref | What it is |
|---|---|
| J1 | Battery, XT30 |
| J3 | iBUS / SBUS receiver, 1×3 |
| J4 | PWM receiver, 1×8 |
| J5 | Motor outputs, 1×5 |
| J6 | GPS UART, 1×4 |
| J9 | USB-C |
| — | ADC battery-voltage divider |
Rev 1 is the first design, in the repository root (flight_controller.kicad_sch, flight_controller.kicad_pcb, flight_controller_BOM.csv, and ESP32-FLight-Controller-Gerber.zip).
Rev 2 is the board that was manufactured. Files are under Rev2/. Compared with the Rev 1 BOM, Rev 2 adds:
KiCad renders and copper views:
ESP32-Flight-Controller
├── flight_controller.kicad_pro Rev 1 KiCad project
├── flight_controller.kicad_sch
├── flight_controller.kicad_pcb
├── flight_controller_BOM.csv
├── ESP32-FLight-Controller-Gerber.zip
├── pcb.png
├── schematic.png
├── 3D_front.png
├── 3D_back.png
├── LICENSE
├── README.md
└── Rev2/
├── KiCad/ schematic, PCB, NextPCB logo footprint
├── Gerbers/ copper, mask, paste, silk, edge, drill
├── BOM/flight_controller_bom.csv
├── Documentation/ drill map
└── Images/ photos, renders, copper plots, logoOpen Rev2/KiCad/flight_controller_rev2.kicad_pro in KiCad 8. The Gerber set in Rev2/Gerbers/ is what was sent for manufacturing.
Thank you to NextPCB for manufacturing the Rev 2 PCB. That support took the design from KiCad to a finished board and made the hands-on testing of this student project possible.
Manufacturing partner: NextPCB
Sponsored revision: Rev 2
These are next hardware steps, not features of the current PCB:
Shazmeen Siddiqui
B.Tech, Electrical and Computer Engineering, Jamia Millia Islamia
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C5, C6, C7, C8, C9, C12, C13 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 10uF 16V | Capacitor_SMD:C_0805_2012Metric | C4, C14 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 1 | 100uF 16V | Capacitor_SMD:C_Elec_6.3x5.8 | C3 |
| 1 | 100uF 35V | Capacitor_SMD:C_Elec_6.3x5.8 | C1 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 1N4148 | Diode_SMD:D_SOD-123 | D3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_EVQP7C | SW2 |
| 1 | Battery XT30 | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | GPS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | IBUS/SBUS RECIEVER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | MOTOR OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | PWM RECIEVER | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_EVQP7C | SW1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J9 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | ~ | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | MP1584 |

shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.


dharaneesh-m-oss/lorawatch_pcb
Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.



schoolllex/ESPBoosted
A custom, feature-rich ESP32-WROOM-32 development board featuring built-in environmental sensors, power management, and expansion interfaces.

nguyenduchan/fiberboard
Fiberboard là bo mạch điều khiển logic tích hợp (AIO), không có driver stepper Nema. Cùng chức năng module ESP32 công nghiệp thông dụng: 4 ngõ vào cách ly + 4 relay + RS485.

vadymtaranenko/ESP32-3S-BMS
Prosty, niezawodny system zarządzania pakietami Li-Po 3S oparty na mikrokontrolerze ESP32. Układ komunikuje się po magistrali SPI.

It measures 66.5 × 47 mm and has 4 copper layers, 1.6 mm thick.
48 parts, built around the CH340C, ESP32-WROOM-32E, AMS1117-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the shazmeenShz/ESP32-Flight-Controller repository on GitHub, at the commit this page was made from: the board is flight_controller.kicad_pcb and its schematic Rev2/KiCad/flight_controller_rev2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).