Skip to the content
2 layers65 × 77.5 mmLora, the printed circuit board in 3D

Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.

Size
65 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
73
Pads
233
Tracks, vias
855, 66
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Jun 2026
Updated
25 Jun 2026

Overview

Lora is an open-source printed circuit board by dharaneesh-m-oss, from the dharaneesh-m-oss/lorawatch_pcb repository on GitHub. It is a 2-layer board of 65 × 77.5 mm with 41 parts on 73 nets, routed with 855 tracks and 66 vias.

It is built around the ESP32-WROOM-32E, BME280 and AMS1117-3.3, with the MPU-6050, TP4056-42-ESOP8 and WS2812B among its other parts. Its parts include 17 capacitors, 7 resistors, 7 ICs, 3 diodes and 3 connectors. It belongs with the radio and wireless and home automation and IoT boards and the ESP32 boards of this library.

Main components

6

README

README.md

LoRa Wearable IoT PCB

A compact, low-power LoRa-enabled wearable IoT hardware platform designed using KiCad. This PCB was developed by transforming our Smart India Hackathon (SIH) prototype into a custom embedded hardware solution.

The board integrates long-range communication, motion sensing, environmental monitoring, GPS connectivity, battery charging, and onboard power management into a compact PCB suitable for wearable and portable IoT applications.


Features

  • ESP32-WROOM-32E Microcontroller
  • LoRa RA-02 (SX1278) Long Range Communication
  • GPS Interface
  • MPU6050 6-Axis IMU
  • BME280 Temperature, Humidity & Pressure Sensor
  • USB Type-C Power Input
  • TP4056 Li-ion Battery Charging
  • 3.3V Voltage Regulation
  • WS2812B Programmable RGB Status LED
  • SOS Push Button
  • Active Buzzer
  • Compact PCB Layout
  • Designed in KiCad

Hardware Specifications

ComponentDescription
MCUESP32-WROOM-32E
LoRaAi-Thinker RA-02 (SX1278)
Motion SensorMPU6050
Environmental SensorBME280
Battery ChargerTP4056
Voltage RegulatorAMS1117-3.3
CommunicationLoRa + UART + I²C + SPI
Power InputUSB Type-C
Power Source3.7V Li-ion Battery

Project Structure

text
LoRa-Wearable-PCB/
│
├── Hardware/
│   ├── Schematic
│   ├── PCB Layout
│   ├── 3D PCB Model
│   └── Libraries
│
├── Images/
│   ├── PCB_3D.png
│   ├── PCB_Top.png
│   ├── PCB_Bottom.png
│   └── Schematic.png
│
├── Manufacturing/
│   ├── Gerber Files
│   ├── Drill Files
│   ├── BOM
│   └── Pick and Place
│
└── README.md

Interfaces

SPI

  • LoRa RA-02

I²C

  • MPU6050
  • BME280

UART

  • GPS Module

GPIO

  • WS2812B RGB LED
  • SOS Button
  • Active Buzzer

Software Support

  • Arduino IDE
  • PlatformIO
  • ESP-IDF

Applications

  • Smart India Hackathon Projects
  • Wearable IoT Devices
  • Emergency Communication Systems
  • Disaster Management
  • Environmental Monitoring
  • Asset Tracking
  • Wildlife Monitoring
  • Smart Agriculture
  • Remote Data Acquisition

Design Software

  • KiCad

Current Status

  • ✅ Schematic Completed
  • ✅ PCB Layout Completed
  • ✅ 3D PCB Model Completed
  • ⏳ PCB Fabrication
  • ⏳ Assembly
  • ⏳ Firmware Development
  • ⏳ Hardware Validation

Future Improvements

  • Replace AMS1117 with a low-power LDO
  • Add battery protection IC
  • Integrate USB-UART programmer
  • Optimize RF layout
  • Reduce PCB size
  • Improve power efficiency

License

This project is released under the MIT License.


Acknowledgement

This project originated as a Smart India Hackathon (SIH) prototype and has evolved into a custom PCB through continuous design improvements and embedded hardware development.


If you found this project interesting, consider giving the repository a ⭐.

Parts

41
QtyValueFootprintReferences
9100nCapacitor_SMD:C_0603_1608MetricC1, C3, C5, C7, C9, C10, C11, C12, C17
610uCapacitor_SMD:C_0805_2012MetricC4, C6, C8, C13, C14, C15
3SW_PushButton_Switch_SMD:SW_SPST_TL3342SW1, SW2, SW3
210KResistor_SMD:R_0603_1608MetricR1, R2
21KResistor_SMD:R_0603_1608MetricR4, R5
2LEDLED_SMD:LED_0603_1608MetricD2, D3
12.2nCapacitor_SMD:C_0603_1608MetricC2
12.4KResistor_SMD:R_0603_1608MetricR3
122uCapacitor_SMD:C_1206_3216MetricC16
1330Resistor_SMD:R_0603_1608MetricR7
15.1KResistor_SMD:R_0603_1608MetricR6
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U6
1Ai-Thinker-Ra-02RF_Module:Ai-Thinker-Ra-01-LoRaU3
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU4
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_CoaxialConnector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_VerticalJ2
1ESP32-WROOM-32ERF_Module:ESP32-WROOM-32DU1
1GPS_MODULEConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalU7
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU2
1TP4056-42-ESOP8Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalViasU5
1USB_C_Plug_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12P1
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1
1batteryConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ3

Similar boards

  • 2 layers52.8 × 71.8 mmESPBoosted, the printed circuit board in 3D

    ESPBoosted

    schoolllex/ESPBoosted

    A custom, feature-rich ESP32-WROOM-32 development board featuring built-in environmental sensors, power management, and expansion interfaces.

    51 parts
  • 4 layers67.5 × 53.5 mmFlight controller rev2, the printed circuit board in 3D

    Flight controller rev2

    shazmeenShz/ESP32-Flight-Controller

    Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

    65 parts3MIT
  • 2 layers50.1 × 61 mmDiseño v2, the printed circuit board in 3D

    Diseño v2

    javierlopezfraile/iot_alfa

    42 parts
  • 2 layers76.8 × 100 mmProject CV, the printed circuit board in 3D

    Project CV

    KazimGL/ESP32-PowerIoT-DevBoard

    ESP32 battery-powered IoT dev board with Li-ion charging, protection, and sensor support — designed in KiCad

    62 parts
  • 2 layers30 × 60 mmSensor node kicad, the printed circuit board in 3D

    Sensor node kicad

    shyver/sensor-node

    This project is a compact, battery-powered environmental monitoring device built around the ESP32. It is designed to measure temperature, humidity, and atmospheric pressure, and transmit data wirelessly over Wi-Fi.

    53 partsMIT
  • 2 layers78.5 × 32.8 mmSnakebot pcb dev, the printed circuit board in 3D

    Snakebot pcb dev

    ERC-BPGC/SnakeBot

    SnakeBot Project

    48 parts2MIT
  • 2 layers63 × 62 mmRocketFlightController, the printed circuit board in 3D

    RocketFlightController

    Tiladura/RocketFlightController

    And there is a bunch of capacitors, resistors, some buttons which are all used on a single custom PCB, all parts of which i will list in BOM list in the end.

    25 parts1
  • 2 layers90 × 60 mmEsp32 control node, the printed circuit board in 3D

    Esp32 control node

    avolk201/RTOS-Demo

    A functioning RTOS project for an ESP32

    48 parts

Questions

How big is the Lora PCB?

It measures 65 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lora use?

41 parts, built around the ESP32-WROOM-32E, BME280, AMS1117-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lora KiCad files?

From the dharaneesh-m-oss/lorawatch_pcb repository on GitHub, at the commit this page was made from: the board is lora.kicad_pcb and its schematic lora.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lora design in my own project?

Its repository states no licence, so its author keeps all rights: ask dharaneesh-m-oss before reusing the design.