
Stm32 timer app
ymhtwe/stm32_timer_app
general purpose control applications using stm32 timer module

Diseño v2 is an open-source printed circuit board by javierlopezfraile, from the javierlopezfraile/iot_alfa repository on GitHub. It is a 2-layer board of 50.1 × 61 mm with 42 parts on 68 nets, routed with 423 tracks and 22 vias.
It is built around the ESP32-WROOM-32E, MLX90614ESF-AAA-000-TU and AP2112K-3.3, with the MPU-6050, TP4056-42-ESOP8 and TS02-66-60-BK-160-LCR-D among its other parts. Its parts include 14 capacitors, 8 resistors, 6 connectors, 5 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C7, C8, C11 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R9 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 3 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3, J4, J5 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C12, C14 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | TS02-66-60-BK-160-LCR-D | TS02-66-60-BK-160-LCR-D:SW_TS02-66-60-BK-160-LCR-D | S2, S3 |
| 1 | 10 | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 2.2n | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 4k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | CPT-1796-3TH | CPT-1796-3TH:SPKR_CPT-1796-3TH | LS1 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32E-USER | U1 |
| 1 | LED BLUE | LED_THT:LED_D3.0mm | D3 |
| 1 | LED GREEN | LED_THT:LED_D3.0mm | D1 |
| 1 | LED RED | LED_THT:LED_D3.0mm | D2 |
| 1 | MLX90614ESF-AAA-000-TU | MLX90614ESF-AAA-000-TU:TO254P912H435-4 | U5 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U4 |
| 1 | MSS-102559-14A-D | MSS-102559-14A-D:SW_MSS-102559-14A-D | S1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_XKB_U254-051T-4BH83-F1S | J1 |
The 40 most common of 42 parts.

ymhtwe/stm32_timer_app
general purpose control applications using stm32 timer module


EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...


MushuDG/ATMegaSpin
A LED game where the player has to press a button at the right moment to reach a specific goal. The challenge of the game lies in the speed at which the LEDs blink, the reduction of this speed with each achieved goal…


williamthayer/DaisyBoards
A full repo of all the design files for each DaisyBoard

dharaneesh-m-oss/lorawatch_pcb
Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.
It measures 50.1 × 61 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ESP32-WROOM-32E, MLX90614ESF-AAA-000-TU, AP2112K-3.3 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the javierlopezfraile/iot_alfa repository on GitHub, at the commit this page was made from: the board is diseño_v2/diseño_v2/diseño_v2.kicad_pcb and its schematic diseño_v2/diseño_v2/diseño_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask javierlopezfraile before reusing the design.