Boards by phorton1

24 boards

Open-source boards designed in KiCad by phorton1 on GitHub, from 9 repositories. A board’s address here is its repository’s there.

2 layers70 × 50 mm
Mother board
phorton1/Arduino-teensyExpression
A teensy3.6 based MIDI controller that accepts 4 expression pedals, and has a 5x5 button array with addressable LEDs, four rotary controllers, a USB host port, and a 3.5" touchscreen.
19 parts30
2 layers144.8 × 104.1 mm
Controller
phorton1/Arduino-cnc-cnc3018
A FluidNC based implementation of a controller for a cheap cnc3028 machine
66 parts13
2 layers98 × 96 mm
Board1
phorton1/Arduino-boat-fridgeController
ESP32 based controller for Danfoss BD35/50 using Secop 101N0220, 101N0212, or similar inverter box.
43 parts5
2 layers62.2 × 76.2 mm
Pcb3.3
phorton1/Arduino-theClock3
My third electromagnetically driven wooden geared clock
29 parts1
2 layers89 × 34 mm
Power
phorton1/Arduino-wireStripper32
A machine to cut and strip breadboard wires. Uses a commonly available manual tool, along with an ESP32, a Nema17 stepper motor, a A4988 stepper controller, and a MG595 or similar servo.
15 parts1
2 layers61 × 92.7 mm
Board1
phorton1/Arduino-boat-airco
myIOT device for monitoring Webasto FCF Platinum Air Conditioner and controlling a custom built Condensate Drain Pump, along with a custom Perl webasto.pm Console program for analyzing the RS485 signals between the…
32 parts
2 layers111.8 × 88.9 mm
BilgeAlarm
phorton1/Arduino-boat-bilgeAlarm
Second generation ESP32 based bilgeAlarm (previously "bilgePumpSwitch")
62 parts
2 layers148 × 92.5 mm
Mother board
phorton1/Arduino-TE3
The vGuitar System "Foot Pedal" program that runs on a teensy 4.1 and all of the 3D printing and electronic circuit schematics and PCB designs.
32 partsGPL-3.0
2 layers121.9 × 43.2 mm
Pcb1.0
phorton1/Arduino-theClock
ESP32 based magnetic pendulum clock
18 parts
2 layers20 × 24 mm
Host board
phorton1/Arduino-teensyExpression
A teensy3.6 based MIDI controller that accepts 4 expression pedals, and has a 5x5 button array with addressable LEDs, four rotary controllers, a USB host port, and a 3.5" touchscreen.
4 parts30
2 layers56 × 50 mm
Rotary board
phorton1/Arduino-teensyExpression
A teensy3.6 based MIDI controller that accepts 4 expression pedals, and has a 5x5 button array with addressable LEDs, four rotary controllers, a USB host port, and a 3.5" touchscreen.
14 parts30
2 layers44.5 × 53.3 mm
Uno display connector
phorton1/Arduino-teensyExpression
A teensy3.6 based MIDI controller that accepts 4 expression pedals, and has a 5x5 button array with addressable LEDs, four rotary controllers, a USB host port, and a 3.5" touchscreen.
3 parts30
2 layers38 × 24 mm
Usb board
phorton1/Arduino-teensyExpression
A teensy3.6 based MIDI controller that accepts 4 expression pedals, and has a 5x5 button array with addressable LEDs, four rotary controllers, a USB host port, and a 3.5" touchscreen.
9 parts30
2 layers17.8 × 38.1 mm
Lcd connector
phorton1/Arduino-cnc-cnc3018
A FluidNC based implementation of a controller for a cheap cnc3028 machine
19 parts13
2 layers41 × 53 mm
MiniBox
phorton1/Arduino-boat-fridgeController
ESP32 based controller for Danfoss BD35/50 using Secop 101N0220, 101N0212, or similar inverter box.
19 parts5
2 layers62.2 × 76.2 mm
Pcb3.1
phorton1/Arduino-theClock3
My third electromagnetically driven wooden geared clock
24 parts1
2 layers88 × 48 mm
Docs
phorton1/Arduino-wireStripper32
A machine to cut and strip breadboard wires. Uses a commonly available manual tool, along with an ESP32, a Nema17 stepper motor, a A4988 stepper controller, and a MG595 or similar servo.
14 parts1
2 layers50 × 18 mm
Ui board
phorton1/Arduino-wireStripper32
A machine to cut and strip breadboard wires. Uses a commonly available manual tool, along with an ESP32, a Nema17 stepper motor, a A4988 stepper controller, and a MG595 or similar servo.
3 parts1
2 layers10.2 × 62.2 mm
Led board
phorton1/Arduino-boat-bilgeAlarm
Second generation ESP32 based bilgeAlarm (previously "bilgePumpSwitch")
8 parts
2 layers17.8 × 38.1 mm
Lcd connector
phorton1/Arduino-TE3
The vGuitar System "Foot Pedal" program that runs on a teensy 4.1 and all of the 3D printing and electronic circuit schematics and PCB designs.
12 partsGPL-3.0
2 layers27.9 × 27.9 mm
Led board
phorton1/Arduino-TE3
The vGuitar System "Foot Pedal" program that runs on a teensy 4.1 and all of the 3D printing and electronic circuit schematics and PCB designs.
19 partsGPL-3.0
2 layers114 × 32 mm
Rotary board
phorton1/Arduino-TE3
The vGuitar System "Foot Pedal" program that runs on a teensy 4.1 and all of the 3D printing and electronic circuit schematics and PCB designs.
8 partsGPL-3.0
2 layers197 × 25 mm
Row board
phorton1/Arduino-TE3
The vGuitar System "Foot Pedal" program that runs on a teensy 4.1 and all of the 3D printing and electronic circuit schematics and PCB designs.
23 partsGPL-3.0
2 layers49.5 × 86.4 mm
Pcb1.1
phorton1/Arduino-theClock
ESP32 based magnetic pendulum clock
11 parts