
Board1
phorton1/Arduino-boat-fridgeController
ESP32 based controller for Danfoss BD35/50 using Secop 101N0220, 101N0212, or similar inverter box.

ESP32 based controller for Danfoss BD35/50 using Secop 101N0220, 101N0212, or similar inverter box.
MiniBox is an open-source printed circuit board by phorton1, from the phorton1/Arduino-boat-fridgeController repository on GitHub. It is a 2-layer board of 41 × 53 mm with 19 parts on 15 nets, routed with 135 tracks and 12 vias.
Its parts include 4 resistors, 4 connectors, 3 diodes, 2 switches and 1 transistor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.5K | 0_my_footprints2:resistor | R2, R3 |
| 1 | |||
| 1 | 10K? | 0_my_footprints2:resistor | R4 |
| 1 | 1K | 0_my_footprints2:resistor | R1 |
| 1 | BC557 PNP | 0_my_footprints2:transistor | Q1 |
| 1 | CONTROLLER | 0_my_footprints2:myJST8_right | J2 |
| 1 | FAN | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | GREEN | 0_my_footprints2:led_small_green | D1 |
| 1 | INV_CONN | 0_my_footprints2:myJST6_right | J3 |
| 1 | INV_PWR | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | LOW/HIGH | 0_my_footprints2:SlideSPDT_small | SW2 |
| 1 | OVERRIDE | 0_my_footprints2:SlideSPDT_small | SW1 |
| 1 | RED | 0_my_footprints2:led_small_red | D3 |
| 1 | YELLOW | 0_my_footprints2:led_small_yellow | D2 |
The 15 most common of 19 parts.

phorton1/Arduino-boat-fridgeController
ESP32 based controller for Danfoss BD35/50 using Secop 101N0220, 101N0212, or similar inverter box.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
It measures 41 × 53 mm and has 2 copper layers, 1.6 mm thick.
19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the phorton1/Arduino-boat-fridgeController repository on GitHub, at the commit this page was made from: the board is docs/kicad/miniBox/miniBox.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask phorton1 before reusing the design.