
Brain PCB
oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.

Editable KiCad projects for the brain, light, power, and pump boards.
Power PCB is an open-source printed circuit board by oudehm, from the oudehm/seniorDesignPCB repository on GitHub. It is a 4-layer board of 100 × 100 mm with 64 parts on 24 nets, routed with 358 tracks and 111 vias.
It is built around the RT0603BRD07100KL, EEHZC1V101P and RT0603BRD07105KL, with the RC0603FR-0710KL, 0451003.MRL and CC0805JRNPO9BN750 among its other parts. Its parts include 17 capacitors, 12 resistors, 8 connectors, 7 fuses and 3 ICs.
Editable KiCad projects for the brain, light, power, and pump boards.
3D renders from the KiCad designs. Parts without available 3D models may not appear.
The main STM32 controller connects the environmental sensors and display, and provides control signals for the lights, dosing pumps, fans, and cooler.

Four MOSFET channels switch the blue, red, near-infrared, and white grow lights using PWM signals from the brain board.

Distributes the 12 V supply through fused branches and generates 5 V and 3.3 V rails for the system. It also includes the cooler switching circuit.

Five MOSFET driver channels control the Micro, Grow, Bloom, pH-up, and pH-down dosing pumps, with flyback diodes for the pump loads.

brain_PCB/brain_PCB.kicad_prolight_PCB/light_PCB.kicad_propower_PCB/power_PCB.kicad_propump_PCB/pump_PCB.kicad_proCustom symbols, footprints, library tables, design rules, and the referenced local USB 3D model are included. Local libraries use ${KIPRJMOD} paths so they work wherever you extract the repository. The USB model is a simplified representation.
Manufacturing outputs, review reports, backups, and personal editor settings are excluded. Generate fabrication files from the projects when needed.
Some power-board 3D models (the 6-pin and 10-pin Molex Micro-Fit connectors and Littelfuse NANO2 fuse) were unavailable in the KiCad 10.0.3 libraries used for verification. Their schematic symbols and PCB footprints are included in the designs; these parts may be absent from the 3D view.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF 50V X7R | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C10, C11, C15 |
| 4 | 22uF 25V X7R | Capacitor_SMD:C_1210_3225Metric | C6, C7, C12, C13 |
| 4 | MountingHole_3.2mm_M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Fiducial_1mm_Mask2mm | Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 100k 0.1% | Resistor_SMD:R_0603_1608Metric | R3, R7 |
| 2 | 100uF 35V HYBRID | Capacitor_SMD:CP_Elec_8x10.5 | C1, C17 |
| 2 | 105k 1% | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R12 |
| 2 | 10uF 50V X7R | Capacitor_SMD:C_1210_3225Metric | C3, C9 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 3A FAST / PROVISIONAL | Fuse:Fuse_Littelfuse-NANO2-451_453 | F3, F5 |
| 2 | 511k 1% | Resistor_SMD:R_0603_1608Metric | R1, R5 |
| 2 | 75pF 50V C0G 5% | Capacitor_SMD:C_0805_2012Metric | C8, C14 |
| 2 | TPS54302DDCR | Package_TO_SOT_SMD:SOT-23-6 | U1, U2 |
| 1 | +3V3 | HydroPower:TestPoint_Pad_D2.0mm_ClearSilk | TP3 |
| 1 | +5V | HydroPower:TestPoint_Pad_D2.0mm_ClearSilk | TP4 |
| 1 | 1.5A FAST / AERATOR | Fuse:Fuse_1206_3216Metric | F7 |
| 1 | 1.5A FAST / FAN | Fuse:Fuse_1206_3216Metric | F6 |
| 1 | 10uH | Inductor_SMD:L_Coilcraft_XAL7030-103 | L2 |
| 1 | 12V INPUT - 5 PAIRS | Connector_Molex:Molex_Micro-Fit_3.0_43650-1015_1x10_P3.00mm_Vertical | J1 |
| 1 | 13.5k 0.1% | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 15A FAST / PROVISIONAL | Fuse:Fuse_Littelfuse-NANO2-451_453 | F4 |
| 1 | 1uF 25V X7R | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 20A FAST / PROVISIONAL | Fuse:Fuse_Littelfuse-NANO2-451_453 | F1 |
| 1 | 22.1k 0.1% | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 5A FAST / PROVISIONAL | Fuse:Fuse_Littelfuse-NANO2-451_453 | F2 |
| 1 | 6.8uH | HydroPower:L_Bourns_SRP7030CA_7.6x7.8mm | L1 |
| 1 | AERATOR 12V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | BRAIN POWER | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | COOLER - 3 PAIRS | Connector_Molex:Molex_Micro-Fit_3.0_43650-0615_1x06_P3.00mm_Vertical | J4 |
| 1 | COOLER CONTROL | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | COOL_NEG | HydroPower:TestPoint_Pad_D2.0mm_ClearSilk | TP5 |
| 1 | CSD18540Q5B | Package_TO_SOT_SMD:TDSON-8-1 | Q1 |
| 1 | FANS TO BRAIN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | GND | HydroPower:TestPoint_Pad_D2.0mm_ClearSilk | TP1 |
| 1 | LIGHT BOARD | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | P12V | HydroPower:TestPoint_Pad_D2.0mm_ClearSilk | TP2 |
| 1 | PUMP BOARD | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | SMBJ15A | Diode_SMD:D_SMB | D1 |
| 1 | UCC27511ADBVR | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | V10P45 / 10A 45V | HydroPower:Vishay_V10P45_TO-277A_K1_A2 | D2 |

oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.

oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.

oudehm/seniorDesignPCB
Editable KiCad projects for the brain, light, power, and pump boards.

HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

ECE49022Team22/delivery-robot-pcb
Delivery robot KiCad PCB project and reusable 3.3 V LDO module

Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.


EPFLXplore/Power_HW
KiCad design files for the power boards of the Xplore rover.

misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

ssmo-oss/UMI-Power-distribution
Three separate boards distribute a 12 V supply to the UMI system. D6 is the current prototype revision. It has not been physically qualified or approved for production.
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
64 parts, built around the RT0603BRD07100KL, EEHZC1V101P, RT0603BRD07105KL and RC0603FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oudehm/seniorDesignPCB repository on GitHub, at the commit this page was made from: the board is power_PCB/power_PCB.kicad_pcb and its schematic brain_PCB/brain_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask oudehm before reusing the design.