
Protected power entry
absmach/synth
Open-source circuit compiler for engineers and AI agents

Delivery robot KiCad PCB project and reusable 3.3 V LDO module
Delivery robot 1 is an open-source printed circuit board by ECE49022Team22, from the ECE49022Team22/delivery-robot-pcb repository on GitHub. It is a 4-layer board of 100 × 106 mm with 181 parts on 127 nets, routed with 1,310 tracks and 539 vias.
It is built around the SN74LVC2G17DBVR, SN74LV1T125DBVR-TP and TPS56637RPAR, with the INA237AIDGSR, USBLC6-2SC6 and SN74LVC1T45DBVRE4 among its other parts. Its parts include 57 capacitors, 52 resistors, 18 connectors, 13 diodes and 12 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.
KiCad design files for the ECE49022 Team 22 senior design delivery robot control board.
This repository is the shared workspace for the board schematic, PCB layout, project libraries and design documentation.
The current schematic includes an STM32F091RC microcontroller core, programming/debug and UART headers, reset and boot circuitry, clock and decoupling components, test points, and power conversion from 12 V to 5 V and 3.3 V. The 12 V input has a fuse, a reverse-battery P-FET, a TVS and a battery-voltage sense. The board also feeds four 5 V peripheral ports, a latch servo (half-duplex UART plus a fused battery feed), two MDD20A motor channels and two encoders, and links to the Raspberry Pi 5 (UART, AUX enable from the Pi 3V3, STM32 reset and BOOT0). An INA237 measures battery current on an off-board shunt (firmware counts charge) in the battery negative lead, and a buffered 5 V data line drives the payload-compartment WS2812B interior light.
The IMU (BNO085) is not on this board; it is wired to the robot off-board.
Custom symbol and footprint libraries are included and registered in the project library tables. Keep the directory structure intact so project-relative library paths resolve.
| Path | Purpose |
|---|---|
| delivery_robot_1.kicad_pro | Active KiCad project settings |
| delivery_robot_1.kicad_sch | Main board schematic |
| Buck_5V_2A.kicad_sch | Hierarchical 12 V to 5 V, 2 A buck sheet (TPS54202H, U3) |
| Buck_5V_6A.kicad_sch | Hierarchical 12 V to 5 V, 6 A buck sheet (TPS56637, U2), feeds the Pi 5 |
| Buck_5V_6A_AUX.kicad_sch | Second 12 V to 5 V, 6 A buck sheet (TPS56637, U5), +5V_AUX rail |
| LDO_3V3.kicad_sch | Hierarchical 3.3 V power supply sheet |
| Pi5_Interface.kicad_sch | Raspberry Pi 5 link J13 (6-pin JST XH: UART via R12/R13 1k, GND, Pi 3V3 for the AUX enable, STM32 reset Q2, BOOT0) and Pi power output J14 |
| GPIO_Breakout.kicad_sch | 2x8 2.54 mm expansion header J8 with spare MCU pins only: 1 +3V3, 2/16 GND, ADC (PC0/PA1/PA4), SPI2 (PB13 SCK, PC2 MISO, PB15 MOSI, PB9 CS), PWM (PC6/PC7), USART3 (PC10/PC11), I2C1 (PB6/PB7, now a shared bus with on-board 4.7k pull-ups R56/R57 and the INA237 U13 at 0x40). Unused MCU pins are no-connect. |
| Power_Indicators.kicad_sch | Green power LED per rail (+12V, +5V_PI, +5V_AUX, +5V_SYS, +3V3) and yellow STM32 debug LEDs (PA5, PB12, PB14) |
| Motor_Control.kicad_sch | MDD20A driver terminals (J6, J16) and encoder terminals (J7, J15) for two motors, PWM pull-downs, PTC on each driver ground, encoder buffers U9/U10 (74LVC2G17) with 1k + 1 nF filters, PTC-protected encoder supplies, USBLC6-4SC6 ESD arrays U6 (J6 + J16) and U7 (J7 + J15), STM32 pin table |
| Test_Points.kicad_sch | Power test points: J5 1x06 2.54 mm header (+12V, GND, +5V_AUX, +5V_SYS, +3V3, +3.3VA) and TP3 scope GND loop |
| Input_Protection.kicad_sch | Reverse-battery P-FET Q1 with gate clamp, SMBJ16A TVS D13 on +12V, battery-voltage divider to PA0 |
| AUX_Outputs.kicad_sch | Four +5V_AUX peripheral ports J18-J21 (top-entry JST XH), one 1.5 A PTC each |
| Servo_Interface.kicad_sch | Latch servo port J17 (fused battery feed for an external buck, half-duplex UART through U8 SN74LVC1T45) |
| Battery_Monitor.kicad_sch | Battery current monitor: U13 INA237 on an off-board 50 A / 75 mV shunt in the battery - lead (Kelvin sense on J23), 10R/100 nF input filter, I2C1 on PB6/PB7 at 0x40, ALERT to PB4, VBUS on +12V |
| Interior_Light.kicad_sch | Payload-compartment WS2812B light J24 (3-pin top-entry JST XH): +5V_AUX through PTC F12, U14 SN74LV1T125 buffers PB5 (SPI1_MOSI) data to 5 V, D16 ESD |
| delivery_robot_1.pdf | Plot of all schematic sheets, regenerated automatically on every schematic commit |
| tools/hooks/ | Git hooks (pre-commit regenerates the schematic PDF) |
| libs/ | Project libraries: custom buck converter symbols/footprints, and project_symbols.kicad_sym (STM32F091RCTx and Crystal_GND24 frozen at the versions this design uses) |
| LDO_KiCad/ | Reusable LDO example, libraries and footprint review |
| sym-lib-table, fp-lib-table | Project-specific library configuration |
| docs/ | Subsystem documentation and design notes |
| validation/ | Connectivity checks and reference netlist |
| system-ERC-report.txt | Saved electrical rules check results |
| system-netlist.xml | Exported system connectivity |
| system-preview/ | Rendered schematic sheets |
| received-project-settings/ | Archived initial settings; not the active project |
Power supply details are documented in docs/power-supply.md. Earlier simulation notes are in STM32-LDO-design.md.
The 2026-10-15 design review changes are summarized in docs/design-review-2026-10-15.md. The 2026-10-27 battery current monitor and interior light are described in docs/design-change-2026-10-27.md.
Component-selection rationale is in docs/passive-selection-review.md, docs/clock-selection.md and docs/fuse-selection.md. The fuse selection includes both the PCB-mounted holder and its separately purchased insert.
Schematic: ERC is clean (0 errors, 0 warnings). PCB: 100 x 100 mm, 4 layers with an In1 GND plane. The board was fully routed as of commit 789cabe (2026-10-26), including outer-layer GND pours with stitching vias and widened high-current paths.
The feat/battery-monitor-interior-light branch (2026-10-27) added 18 parts: U13, U14, J23, J24, F12, D16, R54-R60 and C52-C56. They are placed and routed. DRC is clean, with 0 unconnected and 0 schematic parity issues. Layout notes are in docs/design-change-2026-10-27.md.
The saved ERC report and netlist (system-ERC-report.txt, system-netlist.xml) were regenerated on 2026-10-28 with KiCad 10.0.6 for the INA237 / 5.10 V change (ERC: 0 errors, 0 warnings). validation/verify_2026_10_27.py checks the branch against the netlist of its parent commit. validation/verify_integration.py checks against the older October 5 connectivity.
Saved reports describe the checked revision. Regenerate them after relevant design changes.
git config core.hooksPath tools/hooks. The pre-commit hook then re-plots delivery_robot_1.pdf from the staged schematic files and adds it to any commit that changes a .kicad_sch or .kicad_pro file. It needs KiCad installed; set KICAD_CLI if kicad-cli is not in the default location.Editing locks, local UI settings and automatic backups are excluded from Git. Edit the native KiCad sources directly; regenerating files from older scripts may overwrite manual changes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C9, C12, C13, C15, C19, C23, C30, C33, C34, C35, C50, C51 |
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R5, R16, R25, R36, R39, R40, R41, R52, R53, R58 |
| 10 | 100nF / 50V X7R | Capacitor_SMD:C_0805_2012Metric | C37, C38, C39, C41, C42, C49, C52, C53, C54, C56 |
| 7 | 100k | Resistor_SMD:R_0805_2012Metric | R6, R37, R43, R46, R59, R61, R62 |
| 7 | 1k | Resistor_SMD:R_0805_2012Metric | R12, R13, R28, R29, R32, R33, R47 |
| 5 | 1.5A hold | Fuse:Fuse_1812_4532Metric | F4, F5, F6, F7, F12 |
| 5 | 100 | Resistor_SMD:R_0805_2012Metric | R26, R27, R30, R31, R42 |
| 5 | 1nF / 50V C0G | Capacitor_SMD:C_0805_2012Metric | C40, C43, C44, C45, C46 |
| 5 | 47uF | Capacitor_SMD:C_1210_3225Metric | C11, C17, C32, C57, C58 |
| 5 | GREEN | LED_SMD:LED_0805_2012Metric | D3, D4, D5, D6, D7 |
| 5 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | 0.2A hold | Fuse:Fuse_1206_3216Metric | F8, F9, F10, F11 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C7, C8, C28, C29 |
| 4 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6, U7, U11, U12 |
| 3 | 1.5k | Resistor_SMD:R_0805_2012Metric | R18, R19, R20 |
| 3 | 1uF / 16V X7R | Capacitor_SMD:C_0805_2012Metric | C24, C47, C48 |
| 3 | 681 | Resistor_SMD:R_0805_2012Metric | R21, R22, R24 |
| 3 | YELLOW | LED_SMD:LED_0805_2012Metric | D8, D9, D11 |
| 2 | 10 / 1% | Resistor_SMD:R_0805_2012Metric | R54, R55 |
| 2 | 100pF | Capacitor_SMD:C_0805_2012Metric | C10, C31 |
| 2 | 10nF / 100V X7R | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | 16pF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 20k | Resistor_SMD:R_0805_2012Metric | R2, R14 |
| 2 | 3.3uH | project_footprints:L_Wuerth_WE-XHMI-7070 | L2, L3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R56, R57 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 74LVC2G17 | Package_TO_SOT_SMD:SOT-23-6 | U9, U10 |
| 2 | D5V0L1B2WS | Diode_SMD:D_SOD-323 | D14, D16 |
| 2 | TPS56637RPAR | project_footprints:TI_RPA0010A_VQFN-HR-10_3x3mm | U2, U5 |
| 1 | +5V_PI | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | 10A / 32VDC | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | 10uF / 10V X7R | Capacitor_SMD:C_0805_2012Metric | C25 |
| 1 | 10uF / 16V X7R | Capacitor_SMD:C_0805_2012Metric | C55 |
| 1 | 10uH | Inductor_SMD:L_TDK_VLS6045EX_VLS6045AF | L1 |
| 1 | 11.5k / 1% | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 13.7k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 22.1k | Resistor_SMD:R_0805_2012Metric | R38 |
| 1 | 220uF 35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C36 |
| 1 | 22uF | Capacitor_SMD:C_1210_3225Metric | C14 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R60 |
| 1 | 35.7k / 0.1% | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 4.75k | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 442k | Resistor_SMD:R_0805_2012Metric | R63 |
| 1 | 511 | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 5A fast | Fuse:Fuse_Littelfuse-NANO2-451_453 | F3 |
| 1 | 600R | Inductor_SMD:L_0805_2012Metric | FB2 |
| 1 | 68pF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 73.2k | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | 75k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 8MHz | Crystal:Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | Y3 |
| 1 | AUX force-on | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | AUX1 Notecard | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J18 |
| 1 | AUX2 LiDAR | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J19 |
| 1 | AUX3 GNSS | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J20 |
| 1 | AUX4 IMU | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J21 |
| 1 | BAT54WS | Diode_SMD:D_SOD-323 | D15 |
| 1 | BOOT0 jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | DMN63D8L | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Expansion header | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J8 |
| 1 | GND | TestPoint:TestPoint_Keystone_5010-5014_Multipurpose | TP3 |
| 1 | INA237AIDGSR | Package_SO:TSSOP-10_3x3mm_P0.5mm | U13 |
| 1 | INTERIOR LIGHT | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J24 |
| 1 | Latch servo | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J17 |
| 1 | MDD20A PWM1/DIR1/GND | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J6 |
| 1 | MDD20A PWM2/DIR2/GND | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J16 |
| 1 | MMSZ5242B 12V | Diode_SMD:D_SOD-123 | D12 |
| 1 | Motor1 encoder | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J7 |
| 1 | Motor2 encoder | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J15 |
| 1 | Pi 5 link | Connector_JST:JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal | J13 |
| 1 | Pi 5 power | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J14 |
| 1 | Power test points | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | SHUNT SENSE: LOAD / BATT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J23 |
| 1 | SMBJ16A | Diode_SMD:D_SMB | D13 |
| 1 | SN74LV1T125DBVR | Package_TO_SOT_SMD:SOT-23-5 | U14 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | SQJ409EP | Package_SO:PowerPAK_SO-8L_Single | Q1 |
| 1 | STM32F091RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
The 178 most common of 181 parts.

absmach/synth
Open-source circuit compiler for engineers and AI agents

arthur-wirjo/reaction-wheel-inverted-pendulum
A custom-engineered Reaction Wheel Inverted Pendulum designed as a physical testbed for advanced modern control theory.

dy-ma/halloween26
A small LED/resistor practice board used to learn KiCad schematic capture, footprints, routing, silkscreen, and Gerber export. It is not the tractor controller and was not intended for manufacture.

Rithvik-Vadlamani/guadaloop-power-electronics
Selected Guadaloop power-board and levitation H-bridge designs and review packages

open-ephys/oe-acquisition-board-gen3
3rd Generation Open Ephys USB Acquisition Board


kekoraa/usb-c-pd-bench-breakout
USB-C PD trigger/breakout with selectable voltage requests and a routed two-layer KiCad PCB. Design-stage

stockmann-lab/shim_amp_hardware_linear
Hardware related to open-source shim amplifier development for MRI research
It measures 100 × 106 mm and has 4 copper layers, 1.6 mm thick.
181 parts, built around the SN74LVC2G17DBVR, SN74LV1T125DBVR-TP, TPS56637RPAR and INA237AIDGSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ECE49022Team22/delivery-robot-pcb repository on GitHub, at the commit this page was made from: the board is delivery_robot_1.kicad_pcb and its schematic AUX_Outputs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ECE49022Team22 before reusing the design.