Skip to the content
12

0451005.MRL

LittelfuseExtended

-55℃~+125℃ 125V 125V 2.5mm 5.566 50A 5A 6.1mm Surface Mount Fuse 2410 Disposable fuses ROHS

Part id
littelfuse/0451005.MRL
Category
Disposable Fuses
Package
2410
Pins
2
In stock
17,528 at JLCPCB (C48467)
Used on
7 open-source boards

Overview

The 0451005.MRL is a disposable Fuse made by Littelfuse in a 2410 package with 2 pins. -55℃~+125℃ 125V 125V 2.5mm 5.566 50A 5A 6.1mm Surface Mount Fuse 2410 Disposable fuses ROHS.

PCBKit's library has its KiCad symbol (Device:Fuse, from KiCad's library) and its footprint (EasyEDA_Cloud:FUSE-SMD_L6.1-W2.6, from EasyEDA), ready for a KiCad board. 17,528 are in stock at JLCPCB (part C48467). 7 open-source boards in 7 repositories on GitHub use it.

Symbol

Device:FuseFrom KiCad's library

Footprint

12
EasyEDA_Cloud:FUSE-SMD_L6.1-W2.6From EasyEDA

Pinout

2
The pins of the 0451005.MRL
PinNameType
1—Passive
2—Passive

Open-source boards using it

7
  • 4 layers101 × 51.5 mmQuack core, the printed circuit board in 3D

    Quack core

    HeyPCB/quack-core

    Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

    138 parts1CERN-OHL-S-2.0
  • 4 layers100 × 100 mmFarmMesh Node, the printed circuit board in 3D

    FarmMesh Node

    chinawrj/FarmMesh-Node

    Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.

    164 parts
  • 4 layers100 × 106 mmDelivery robot 1, the printed circuit board in 3D

    Delivery robot 1

    ECE49022Team22/delivery-robot-pcb

    Delivery robot KiCad PCB project and reusable 3.3 V LDO module

    181 parts
  • 4 layers64 × 80 mmIris brainstem, the printed circuit board in 3D

    Iris brainstem

    HeyPCB/iris-brainstem

    Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.

    97 partsCERN-OHL-S-2.0
  • 4 layers50 × 40 mmRAPS-5 V1, the printed circuit board in 3D

    RAPS-5 V1

    itsTasos/RAPS-5

    Dual-input power module with independent LiPo protection, buck conversion and ideal-diode OR-ing.

    96 parts
  • 4 layers95 × 80 mmBenchswitch usb dut hub, the printed circuit board in 3D

    Benchswitch usb dut hub

    saikhamhein/benchswitch-usb-dut-hub

    BenchSwitch USB DUT Hub: a four-port USB 2.0 hardware development prototype with KiCad design sources, BOM, manufacturing files, and bring-up documentation.

    150 parts
  • 4 layers100 × 100 mmPower PCB, the printed circuit board in 3D

    Power PCB

    oudehm/seniorDesignPCB

    Editable KiCad projects for the brain, light, power, and pump boards.

    64 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 0451005.MRL?

Yes. The symbol is Device:Fuse and the footprint EasyEDA_Cloud:FUSE-SMD_L6.1-W2.6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 0451005.MRL?

2410, with 2 pins. Its footprint is drawn on this page.

Where is the 0451005.MRL datasheet?

Littelfuse publishes it: the Datasheet link on this page opens it.

Where can I order the 0451005.MRL?

JLCPCB lists it as part C48467, with 17,528 in stock; the sellers' links on this page open their listings.

What can replace the 0451005.MRL?

Parts like it in the library: the JFC2410-2120TS by Shenzhen JDT Fuse, the 045106.3MRL by Littelfuse, the 0452012.MRL by Littelfuse and the 24E1630A by Shenzhen lanson Elec. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 0451005.MRL?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.