
ORA Control Board Rev 1.1
gtrupiano/ECE-4998
Senior Design implementation for Electrical Subsystems work for ORA's IGVC Robot

ORA Control Board Rev 2 is an open-source printed circuit board by oaklandrobotics, from the oaklandrobotics/electrical_ora24 repository on GitHub. It is a 2-layer board of 100 × 52.5 mm with 66 parts on 73 nets, routed with 619 tracks and 89 vias.
It is built around the ATMEGA32U4-AU, BS170 and SM04B-GHS-TB, with the MF-MSMF050-2 among its other parts. Its parts include 19 resistors, 17 capacitors, 9 connectors, 4 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R14, R15, R18, R19, R21, R22 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C6, C8, C12, C14, C16, C17 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C9, C10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R20 |
| 3 | BS170 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3, Q5 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R11 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C15 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7, J8 |
| 2 | SM04B-GHS-TB | AdditionalParts:CONN_SM04B-GHS-TB_JST | J1, J5 |
| 1 | 1.57k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | TR1 |
| 1 | 12V | Connector_BarrelJack:BarrelJack_Horizontal | J4 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y2 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 22uF | AdditionalParts:CAP_WCAP-ASLI_05p0X05p5_WRE | C13 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 8Mhz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | IMU_MOUNT | Custom_Parts:IMU_MOUNT | U6 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LOGO | AdditionalParts:ORA_Logo_V2 | G*** |
| 1 | MCP25625-x-SS | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | PWRIN | Diode_SMD:D_SOD-323 | D4 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | Stack Light | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J9 |
| 1 | USB_B_Micro | AdditionalParts:AMPHENOL_10118192-0002LF | J3 |
| 1 | rst | Diode_SMD:D_SOD-323 | D1 |

gtrupiano/ECE-4998
Senior Design implementation for Electrical Subsystems work for ORA's IGVC Robot



oskarhuotari/HeartPCBGift
The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing.


ThunderFly-aerospace/TFHT01
Airborne Humidity and Temperature sensor for UAVs.

ThunderFly-aerospace/TFI2CADT01
I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.

ThunderFly-aerospace/TFRPM01
Revolutions per minute (RPM) meter for UAV, rotors, wheels and engines.
It measures 100 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the ATMEGA32U4-AU, BS170, SM04B-GHS-TB and MF-MSMF050-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oaklandrobotics/electrical_ora24 repository on GitHub, at the commit this page was made from: the board is ORA_ControlBoard/Original Control Board Files/ORA_Control_Board_Rev_2/ORA_Control_Board_Rev_2.kicad_pcb and its schematic ORA_ControlBoard/ORA_ControlBoard-main_Rev2/IMUCONN_sch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask oaklandrobotics before reusing the design.