2 layers50 × 90 mm
2 layers293.4 × 80.5 mm
Mls800
blemasle/mls800-pcb38 MIDI controlled loops switcher PCBs
- Size
- 293.4 × 80.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 124
- Pads
- 516
- Tracks, vias
- 1,425, 141
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Jan 2019
- Updated
- 19 Jan 2019
Overview
Mls800 is an open-source printed circuit board by blemasle, from the blemasle/mls800-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 293.4 × 80.5 mm with 95 parts on 124 nets, routed with 1,425 tracks and 141 vias.
It is built around the ATMEGA32U4-AU, ULN2803A and 24LC256-I/P, with the MCP23017-E/SS, CG0603MLC-05E and LTC-5723HR among its other parts. Its parts include 20 capacitors, 18 resistors, 17 connectors, 11 switches and 9 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
24LC256-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
MCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O Expanders
CG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
LTC-5723HR
DIP-12-35℃~+85℃ 0.56 2.4mcd 2V 4 7 Segment 75mW Common Cathode Red DIP-12 LED Segment Displays ROHSLite-OnLED Segment Displays
MF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
README
README.md
MLS800 PCBs
The MLS800 is an open-source 1U rack unit MIDI controlled Loop Switcher with 8 audio loops.
- 8 independent audio loops
- 128 presets
- Active preset is remotly controlled through MIDI
Program Changemessages - Easy to read through a 4 digits 7 segments display and 9 illuminated switches
This repository contains KiCad files needed to produce the two PCBs.
See the documentation for futher info on the project.
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C4, C5, C7, C9, C10, C11, C12, C13, C14, C18, C20 |
| 10 | SW_TACT_LED | Custom-device:MEC-5G | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11 |
| 8 | LATCH_DPDT | Custom-device:Relay_SMD_DPDT-RT2_bistabil | RE1, RE2, RE3, RE4, RE5, RE6, RE7, RE8 |
| 8 | NSJ8HC | Custom-conn:NSJ8HL | J3, J4, J5, J6, J7, J8, J9, J10 |
| 7 | 1k | Resistors_SMD:R_0805_HandSoldering | R5, R8, R9, R10, R11, R12, R18 |
| 3 | 100uF | Capacitors_SMD:c_elec_6.3x7.7 | C15, C16, C19 |
| 3 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R4, R6 |
| 3 | 220R | Resistors_SMD:R_0805_HandSoldering | R15, R16, R17 |
| 3 | CONN_02X03 | Custom-conn:VASCH3x2 | P1, P4, P5 |
| 2 | 0.22uF | Capacitors_SMD:C_0805_HandSoldering | C3, C17 |
| 2 | 1N4001 | Diodes_SMD:Diode-SMA_Handsoldering | D2, D6 |
| 2 | 1N4148 | Custom-device:SOD-123_Handsoldering | D1, D5 |
| 2 | 22R | Resistors_SMD:R_0805_HandSoldering | R13, R14 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | CG0603MLC-05E | Resistors_SMD:R_0603_HandSoldering | VR1, VR2 |
| 2 | DIN_5 | Custom-conn:DIN_5 | P2, P3 |
| 2 | LM340MP-5.0/NOPB | SMD_Packages:SOT-223 | U1, U8 |
| 2 | NRJ4HF-1 | Custom-conn:NRJ4HF-1 | J2, J11 |
| 2 | ULN2803A | Housings_SOIC:SOIC-18_7.5x11.6mm_Pitch1.27mm | U6, U7 |
| 1 | 0R | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 16Mhz | Crystals_Oscillators_SMD:Q_49U3HMS | X1 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C6 |
| 1 | 22uF | Capacitors_SMD:C_1210_HandSoldering | C8 |
| 1 | 23.6k | Resistors_SMD:R_0805_HandSoldering | R19 |
| 1 | 24LC256 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | 6N137 | SMD_Packages:DIP-8_SMD | IC1 |
| 1 | AS1115 | Housings_SSOP:SSOP-24_3.9x8.7mm_Pitch0.635mm | U5 |
| 1 | ATmega32U4-AU | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U2 |
| 1 | BARREL_JACK | Connect:JACK_ALIM | CON1 |
| 1 | CONN_01X01 | Connect:1pin | MH1 |
| 1 | LTC-5723HR | Custom-display:LTC-5723 | AFF1 |
| 1 | MCP23017 | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U4 |
| 1 | MF-MSMF050-2 | SMD_Packages:SMD-1812 | F1 |
| 1 | Red | LEDs:LED-0805 | D4 |
| 1 | SW_PUSH_RIGHT_ANGLE | Custom-device:SW_PUSH_RIGHT_ANGLE | SW12 |
| 1 | USB | Connect:USB_B | J1 |
| 1 | Yellow | LEDs:LED-0805 | D3 |
Similar boards
- 4 layers63 × 35.6 mm
Kibot variants arduprog
INTI-CMNB/kibot_variants_arduprog
A test/example of how to use KiBot assembly variants
47 parts9MIT - 2 layers120 × 90 mm
- 4 layers34 × 34 mm
AG328X
harichandanrajiv-lab/AG328X-REV-1
AG328X REV-1 is a compact, redesigned implementation of the Arduino UNO platform,. The project focuses on improving the original UNO architecture through a significantly reduced PCB footprint, enhanced power…
78 parts - 4 layers100 × 80 mm
- 4 layers265 × 171.4 mm
T1-panel
INTI-CMNB/kibot_variants_arduprog_site
Example of KiBot navigate results deployment using --quick-start
1,163 parts - 2 layers68.6 × 53.3 mm
Arduino board pcb
marrynrv/Custom-Arduiono-Board
Custom Arduino-compatible microcontroller development board designed in KiCad based on the classic Uno reference schematic
57 parts - 2 layers56.6 × 62.2 mm
ArduinoR3
Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.
59 parts
Questions
How big is the Mls800 PCB?
It measures 293.4 × 80.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mls800 use?
95 parts, built around the ATMEGA32U4-AU, ULN2803A, 24LC256-I/P and MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mls800 KiCad files?
From the blemasle/mls800-pcb repository on GitHub, at the commit this page was made from: the board is mls800.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mls800 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).