Skip to the content
2 layers80.7 × 71.6 mmHeartPCBGift, the printed circuit board in 3D

The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing.

Size
80.7 × 71.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
53
Pads
198
Tracks, vias
695, 135
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Oct 2026
Updated
4 Nov 2026

Overview

HeartPCBGift is an open-source printed circuit board by oskarhuotari, from the oskarhuotari/HeartPCBGift repository on GitHub. It is a 2-layer board of 80.7 × 71.6 mm with 67 parts on 53 nets, routed with 695 tracks and 135 vias.

It is built around the ATMEGA32U4-AU, MF-MSMF050-2 and 1N4448W, with the F.0603.00025/P2-0603G1TS2-06T-002, MPZ1608D101BTA00 and TYPE-C-31-M-12 among its other parts. Its parts include 34 diodes, 14 resistors, 9 capacitors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

9

README

README.md

A gift for my GF

The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing. The PCB has an USB-C receptacle which in addition to powering the board enables programming.

The stand: I also designed a stand which allows the PCB to be mounted with M3 bolts.

The code: It registers button presses and changes between led modes. The modes are all leds on, a sweep, random led on and all leds off.

WhatsApp Image 2026-11-04 at 22 55 39

Parts

67
QtyValueFootprintReferences
30RedPCM_JLCPCB:D_0805D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +14
6100nFPCM_JLCPCB:C_0603C1, C2, C3, C4, C8, C9
6330ΩPCM_JLCPCB:R_0603R2, R3, R4, R5, R6, R7
210kΩPCM_JLCPCB:R_0603R1, R8
215pFPCM_JLCPCB:C_0603C6, C7
222ΩPCM_JLCPCB:R_0603R13, R14
23.3kΩPCM_JLCPCB:R_0603R9, R10
25.1kΩPCM_JLCPCB:R_0603R11, R12
11N4448W_C5190208EasyEDA:SOD-123_L2.7-W1.6-LS3.7-RDD2
11uFPCM_JLCPCB:C_0603C5
1ATMEGA32U4-AUEasyEDA:QFP-44_L10.0-W10.0-P0.80-LS13.2-BLU1
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1F.0603.00025/P2-0603G1TS2-06T-002EasyEDA:LED0603-RD_GREENLED2
1LOGOgrafiikat:kukka v3G***
1MF-MSMF050-2EasyEDA:F1812U2
1MPZ1608D101BTA00EasyEDA:L0603L1
1TYPE-C-31-M-12EasyEDA:USB-C_SMD-TYPE-C-31-M-12_1USBC1
1Tactile Button, 160gfPCM_JLCPCB:SW_TS-1088-AR02016S1
1USBLC6-2SC6EasyEDA:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BLD1
1X322516MLB4SIPCM_JLCPCB:OSC-SMD_4P-L3.2-W2.5-BLX1
1XL-1608UBC-04EasyEDA:LED0603-RD_BLUELED1

The 65 most common of 67 parts.

Similar boards

  • 2 layers80 × 50 mmLED Indicators, the printed circuit board in 3D

    LED Indicators

    aaronsilinskas/aura-prototype

    A monorepo to prototype Aura Game Engine core features.

    34 parts1MIT
  • 2 layersErgonomicGamepad, the printed circuit board in 3D

    ErgonomicGamepad

    vemcg/ErgonomicGamepad

    Custom ergonomic gaming keypad PCB project (KiCad) with a 4x6 key matrix, hot-swap sockets, and USB-C.

    86 partsGPL-3.0
  • 6 layers80.9 × 63 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    neatstranger/Pi-In-The-Skyy

    PoE Camera, Based on Raspberry Pi CM4

    69 parts24
  • 6 layers174.1 × 47.5 mmSwitch, the printed circuit board in 3D

    Switch

    neatstranger/pcie_switch

    105 parts
  • 4 layers210 × 148 mmFibel2, the printed circuit board in 3D

    Fibel2

    nikolozka/Fibel2

    Repository of hardware design files Jetson Orin based Fibel

    514 parts
  • 2 layers285.5 × 95.4 mmMinilite64, the printed circuit board in 3D

    Minilite64

    Wizmann/minilite64-keyboard

    Minilite64 是一块 64 键、Kailh 热插拔、GH60 外形兼容的双层键盘 PCB。 REV B / 2026-08-B 已取消 RP2040 开发板、独立载板和 FFC/FPC;主控改为板载 ATmega32U4-AU,使用 USB-C、16 MHz 晶振、USB ESD 和 AVR ISP。

    154 parts
  • 4 layers64.6 × 55.2 mmWhisker, the printed circuit board in 3D

    Whisker

    HeyPCB/whisker

    Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

    118 partsCERN-OHL-S-2.0
  • 2 layers114.3 × 163.2 mmDigi pot eval board, the printed circuit board in 3D

    Digi pot eval board

    mar0x/pq-4

    BOSS PQ-4 Parametric Equalizer replica

    85 parts

Questions

How big is the HeartPCBGift PCB?

It measures 80.7 × 71.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HeartPCBGift use?

67 parts, built around the ATMEGA32U4-AU, MF-MSMF050-2, 1N4448W and F.0603.00025/P2-0603G1TS2-06T-002. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HeartPCBGift KiCad files?

From the oskarhuotari/HeartPCBGift repository on GitHub, at the commit this page was made from: the board is HeartPCBGift.kicad_pcb and its schematic HeartPCBGift.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HeartPCBGift design in my own project?

Its repository states no licence, so its author keeps all rights: ask oskarhuotari before reusing the design.