

Digi pot eval board
BOSS PQ-4 Parametric Equalizer replica
- Size
- 114.3 × 163.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 142
- Pads
- 473
- Tracks, vias
- 946, 203
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Aug 2019
- Updated
- 14 Jan 2024
Overview
Digi pot eval board is an open-source printed circuit board by mar0x, from the mar0x/pq-4 repository on GitHub. It is a 2-layer board of 114.3 × 163.2 mm with 85 parts on 142 nets, routed with 946 tracks and 203 vias.
It is built around the ATMEGA32U4-AU, ULN2003A and USBLC6-2SC6, with the BSS84, HS1D and MF-MSMF050-2 among its other parts. Its parts include 22 resistors, 12 ICs, 12 connectors, 10 capacitors and 5 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsHS1D
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1A 1V@1A 200V 30A 50ns 5uA SMA(DO-214AC) Fast Recovery / High Efficiency Diodes ROHSYangzhou Yangjie Electronic TechnologyFast Recovery / High Efficiency DiodesMF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R7, R12, R17, R18, R19, R20, R21, R22, R23, R24, R26 |
| 7 | DigiPot | DigiPot:DigiPot_Vertical_SMD | U1, U2, U3, U4, U5, U6, U7 |
| 6 | DigiPot:DigiPot_Stub_SMD | , , , , , | |
| 6 | Conn_01x02_Male | Connector_JST:JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J4, J7, J10, J11, J12, J14 |
| 4 | G6K2FYTR5DC | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K2, K4, K5, K6 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C3, C6 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R13, R16 |
| 3 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1, JP2, JP3 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R15 |
| 2 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C10 |
| 1 | 10u | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C8 |
| 1 | 16MHz HC-49SM | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | 22u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 47u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C9 |
| 1 | 6N138 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | U10 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U12 |
| 1 | Conn_01x05_Male | Connector_JST:JST_EH_B05B-EH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | Conn_01x06_Male | Connector_JST:JST_EH_B06B-EH-A_1x06_P2.50mm_Vertical | J13 |
| 1 | Conn_01x07_Male | Connector_JST:JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical | J1 |
| 1 | Conn_01x10_Male | Connector_JST:JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J2 |
| 1 | DB-1S | Diode_SMD:Diode_Bridge_Vishay_DFS | D1 |
| 1 | DS1013-06S | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J8 |
| 1 | HS1D | Diode_SMD:D_SMA | D2 |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | NCP1117ST50T3G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U11 |
| 1 | SW_MEC_5G_LED | bypass_panel:bypass_panel_THT | SW1 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U9 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J3 |
| 1 | nav_panel | nav_panel:nav_panel_SMD | PAN1 |
The 77 most common of 85 parts.
More from mar0x/pq-4
7- 2 layers

- 2 layers

- 2 layers

- 4 layers30 × 30 mm

- 2 layers60.5 × 30 mm

- 2 layers114.3 × 36.8 mm

- 2 layers30 × 14 mm

Similar boards
- 2 layers80.7 × 71.6 mm

HeartPCBGift
oskarhuotari/HeartPCBGift
The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing.
67 parts - 2 layers76.2 × 40.6 mm

Fobos mtc
GMUCERG/fobos
Flexible Open-source workBench fOr Side-channel analysis (FOBOS)
52 parts18Apache-2.0 - 2 layers293.4 × 80.5 mm

- 2 layers90 × 50 mm

- 2 layers100 × 60 mm

ORA Control Board Rev 1.1
gtrupiano/ECE-4998
Senior Design implementation for Electrical Subsystems work for ORA's IGVC Robot
69 parts - 2 layers100 × 52.5 mm

- 2 layers101.5 × 53.3 mm

- 2 layers68.5 × 53.3 mm

Questions
How big is the Digi pot eval board PCB?
It measures 114.3 × 163.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Digi pot eval board use?
85 parts, built around the ATMEGA32U4-AU, ULN2003A, USBLC6-2SC6 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digi pot eval board KiCad files?
From the mar0x/pq-4 repository on GitHub, at the commit this page was made from: the board is digi_pot_eval_board/digi_pot_eval_board.kicad_pcb and its schematic digi_pot/digi_pot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digi pot eval board design in my own project?
Its repository states no licence, so its author keeps all rights: ask mar0x before reusing the design.