

Digi pot
BOSS PQ-4 Parametric Equalizer replica
- Size
- 30 × 30 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 40
- Pads
- 115
- Tracks, vias
- 338, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Aug 2019
- Updated
- 14 Jan 2024
Overview
Digi pot is an open-source printed circuit board by mar0x, from the mar0x/pq-4 repository on GitHub. It is a 4-layer board of 30 × 30 mm with 25 parts on 40 nets, routed with 338 tracks and 21 vias.
It is built around the ATMEGA328P-AU. Its parts include 11 resistors, 6 connectors, 5 capacitors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 30k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R11 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C5 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J5 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C4 |
| 1 | AD5262 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U2 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08_Male | Annular_LED_Ring:Annular_LED_Ring | J1 |
| 1 | Rotary_Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC12E_Vertical_H20mm | SW1 |
More from mar0x/pq-4
7- 2 layers

- 2 layers114.3 × 163.2 mm

- 2 layers

- 2 layers

- 2 layers60.5 × 30 mm

- 2 layers114.3 × 36.8 mm

- 2 layers30 × 14 mm

Similar boards
- 2 layers80 × 110 mm

NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 2 layers50.5 × 128.5 mm

- 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm

- 2 layers73 × 94 mm

Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm

OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm

Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT
Questions
How big is the Digi pot PCB?
It measures 30 × 30 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Digi pot use?
25 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digi pot KiCad files?
From the mar0x/pq-4 repository on GitHub, at the commit this page was made from: the board is digi_pot/digi_pot.kicad_pcb and its schematic digi_pot/digi_pot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digi pot design in my own project?
Its repository states no licence, so its author keeps all rights: ask mar0x before reusing the design.