Skip to the content
2 layers285.5 × 95.4 mmMinilite64, the printed circuit board in 3D

Minilite64 是一块 64 键、Kailh 热插拔、GH60 外形兼容的双层键盘 PCB。 REV B / 2026-08-B 已取消 RP2040 开发板、独立载板和 FFC/FPC;主控改为板载 ATmega32U4-AU,使用 USB-C、16 MHz 晶振、USB ESD 和 AVR ISP。

Size
285.5 × 95.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
154
Nets
109
Pads
697
Tracks, vias
1,826, 573
Pours
10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Jul 2026
Updated
2 Aug 2026

Overview

Minilite64 is an open-source printed circuit board by Wizmann, from the Wizmann/minilite64-keyboard repository on GitHub. It is a 2-layer board of 285.5 × 95.4 mm with 154 parts on 109 nets, routed with 1,826 tracks and 573 vias.

It is built around the ATMEGA32U4-AU, USBLC6-2SC6 and 1N4148W, with the X322516MLB4SI among its other parts. Its parts include 64 diodes, 64 switches, 9 capacitors, 7 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

Minilite64

Minilite64 是一块 64 键、Kailh 热插拔、GH60 外形兼容的双层键盘 PCB。 REV B / 2026-08-B 已取消 RP2040 开发板、独立载板和 FFC/FPC;主控改为板载 ATmega32U4-AU,使用 USB-C、16 MHz 晶振、USB ESD 和 AVR ISP。

当前状态

  • PCB 主板框实测 285.45 × 94.95 mm、四角 R3.0 mm,保留 GH60 侧边槽及不干涉轴体的孔位。
  • 支撑:PCB 使用 H1/H2/H4 三个 φ2.4 mm 圆孔,加左右两个 GH60 PKRHSL 7.00024 × 2.49936 mm Shift 开边槽,共五个 M2 固定点;不在 Shift 行另钻圆孔。H3/H5/H6/H7/H8 为 φ4.0 mm 无孔实心托台,直接顶到 PCB 底面,不使用软垫。五个托台均有 R2.0 根部圆角与四向加强筋;三个圆孔螺柱有四向筋,两个 Shift 螺柱有三条内向筋并与侧墙融合。定位板设三个 φ2.4 mm 工具孔及两个匹配开边槽,螺丝头仍压在 PCB 上。
  • 电气:KiCad 10 DRC、未连接、原理图一致性和 ERC 均为 0;USB ESD 紧邻接口,边缘 ISP RESET 已串联隔离并在 MCU 端滤波。
  • 配列:KLE.txt 中的 64 键配列不变,无灯光。
  • 固件:Vial-QMK 已切换到 atmega32u4 + atmel-dfu。
  • 外壳:USB 位于顶视图后侧左方,底面形成 6° GH60 常见倾角;3.2 mm 底板上有 5 个 M2 贯通螺柱、2.2 mm 深六角螺母槽和 5 个直接接触 PCB 的实心托台。螺柱及托台均有 R2.0 根部圆角和加粗加强筋;边缘 Shift 螺柱由三条内筋和侧墙共同补强。

主要文件

  • hardware/keyboard/Minilite64.kicad_pcb — 完整双层布线 PCB
  • hardware/keyboard/Minilite64.kicad_sch — 与 PCB pad/net 定义一致的原理图
  • hardware/keyboard/Minilite64.kicad_pro — KiCad 工程
  • build/Minilite64-route-output-v3.ses — 当前无 GUI FreeRouting 会话源(本地构建输入)
  • hardware/mechanical/Minilite64_case_preview.scad — 6° 倾角及 USB 插头净空底壳预览
  • hardware/mechanical/Minilite64_switch_plate.scad — 含三个圆孔轴及两个 GH60 侧边槽轴工具孔的 64 键、1.5 mm 定位板
  • hardware/mechanical/Minilite64_case_preview.stl — 可切片检查的闭合 STL
  • tools/generate_pcb.py — PCB、孔位和元件放置的可审查生成源
  • tools/generate_schematic.py — 从 PCB pad/net 生成正式原理图
  • tools/finalize_high_risk_layout.py — 固化 CC1、COL4、USB 长度和晶振局部布线
  • tools/finalize_long_life_revision.py — 将已审计 REV A 布线迁移为 REV B 长期使用版本
  • tools/audit_pcb.py — 输出 DRC 不覆盖的长度与关键器件距离
  • firmware/vial-qmk/keyboards/minilite64 — Vial-QMK 目标
  • docs/PCB_DESIGN.md — 电气、孔位、外壳接口和首板检查说明
  • manufacturing/FABRICATION_NOTES.md — 首板板材、铜厚、表面处理与加工要求
  • manufacturing/PROGRAMMING.md — Atmel DFU bootloader、熔丝值与 ISP 流程
  • docs/renders — PCB 正反面及外壳内外/装配渲染图

渲染图

布线来源

tools/generate_pcb.py 记录 REV B 的板框、孔位、封装、网表和器件位置;正式 生产布线以 hardware/keyboard/Minilite64.kicad_pcb 为准。build/ 中的 SES 属于 REV A 历史自动布线输入,不得直接覆盖 REV B。需要复现迁移时,应先恢复 已审计 REV A PCB,再运行 tools/finalize_long_life_revision.py,随后重生成原理图。

历史完整布线链仅用于追溯:

powershell
python tools/generate_pcb.py
python tools/import_freerouting_ses.py build/Minilite64-placement.kicad_pcb `
  build/Minilite64-route-output-v3.ses hardware/keyboard/Minilite64.kicad_pcb
python tools/finalize_high_risk_layout.py
python tools/fix_socket_diode_clearance.py
python tools/separate_matrix_diode_lands.py
python tools/repair_diode_separation_routes.py
python tools/close_diode_separation_drc.py
python tools/finalize_production_review_layout.py
python tools/join_review_row3.py
python tools/add_back_assembly_silkscreen.py
python tools/repair_usb_signal_integrity.py
python tools/finalize_long_life_revision.py
python tools/convert_h6_to_support.py
python tools/update_hardware_metadata.py
python tools/generate_schematic.py

只有准备重新自动布线时才需要运行 tools/export_freerouting_dsn.py;它会在 build/ 中生成新的 DSN 输入,不会覆盖正式 SES。

复验

powershell
$env:WX_ASSERT_DIALOG = '0'
Remove-Item Env:KICAD_RUN_FROM_BUILD_DIR -ErrorAction SilentlyContinue

& 'C:\Program Files\KiCad\10.0\bin\kicad-cli.exe' pcb drc `
  --refill-zones --schematic-parity --severity-all --exit-code-violations `
  -o build/main_final_drc.rpt hardware/keyboard/Minilite64.kicad_pcb

& 'C:\Program Files\KiCad\10.0\bin\kicad-cli.exe' sch erc `
  --severity-all --exit-code-violations -o build/erc-final.rpt `
  hardware/keyboard/Minilite64.kicad_sch

python tools/audit_pcb.py
python tools/measure_usb_si.py
python tools/validate_plate.py
python tools/validate_case.py

当前生产包为 manufacturing/Minilite64_REV_B_2026-08-B_gerber.zip;孔表及 独立 NPTH/PTH 钻孔文件位于 manufacturing/keyboard/。PCB 再次修改后必须 重新导出并更新制造说明中的 SHA-256。

REV B 面向长期使用,但仍需在投板前用实物核对 HRO USB-C、Kailh 轴座、 2.75U 稳定器、M2 内六角螺钉/六角螺母和打印外壳支柱,并做 1:1 纸样检查。

Parts

154
QtyValueFootprintReferences
641N4148WD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
64MX_HOTSWAP_KAILHSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +48
4100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
3GH60_M2_MOUNTH1, H2, H4
210kResistor_SMD:R_0603_1608MetricR5, R6
210pFCapacitor_SMD:C_0603_1608MetricC6, C7
222Resistor_SMD:R_0603_1608MetricR3, R4
25.1kResistor_SMD:R_0603_1608MetricR1, R2
110uFCapacitor_SMD:C_0805_2012MetricC8
11nFCapacitor_SMD:C_0402_1005MetricC9
11uFCapacitor_SMD:C_0402_1005MetricC5
1470Resistor_SMD:R_0603_1608MetricR7
1ATmega32U4-AUPackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1AVR_ISP_2x3_P2.54_DNPJ2
1PTC_500mAFuse:Fuse_1812_4532MetricF1
1RESET_SHORTJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_CJ1
1X322516MLB4SICrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1

Similar boards

  • 2 layers80.7 × 71.6 mmHeartPCBGift, the printed circuit board in 3D

    HeartPCBGift

    oskarhuotari/HeartPCBGift

    The PCB: A heart shaped board that has 30 leds around the outer perimeter. The MCU used is the ATMEGA32U4 and the leds are controlled using charlieplexing.

    67 parts
  • 2 layersErgonomicGamepad, the printed circuit board in 3D

    ErgonomicGamepad

    vemcg/ErgonomicGamepad

    Custom ergonomic gaming keypad PCB project (KiCad) with a 4x6 key matrix, hot-swap sockets, and USB-C.

    86 partsGPL-3.0
  • 2 layers247.7 × 127 mmEuclid36, the printed circuit board in 3D

    Euclid36

    sadekbaroudi/euclid36

    At the time of creation, using Kicad 5.1.9 - This may not work with future versions

    130 parts24
  • 2 layers304.8 × 95.3 mm65 keyboard untitled, the printed circuit board in 3D

    65 keyboard untitled

    eightbitraptor/65_keyboard_untitled

    My as yet unnamed 65% keyboard design

    150 parts15
  • 2 layers254 × 140 mmIndex tab, the printed circuit board in 3D

    Index tab

    Kyrremann/index-tab

    Hot-swappable 6x13 ortho keyboard

    191 parts8GPL-3.0
  • 2 layers85.7 × 118.3 mmPika board, the printed circuit board in 3D

    Pika board

    FrenzyExists/Pika-Board-Files

    Pika Board v1.0 development files

    67 parts
  • 2 layers59.1 × 49.1 mmDesktopia, the printed circuit board in 3D

    Desktopia

    Diabltica/Desktopia

    Desktopia is an open-source project for easy height control of your IKEA Skarsta/Trotten sit-stand desk, providing a comfortable and customizable workspace experience

    76 parts

Questions

How big is the Minilite64 PCB?

It measures 285.5 × 95.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Minilite64 use?

154 parts, built around the ATMEGA32U4-AU, USBLC6-2SC6, 1N4148W and X322516MLB4SI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Minilite64 KiCad files?

From the Wizmann/minilite64-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/keyboard/Minilite64.kicad_pcb and its schematic hardware/keyboard/Minilite64.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Minilite64 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Wizmann before reusing the design.