2 layers247.7 × 127 mm
Euclid36
sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions
130 parts24
2 layers85.7 × 118.3 mm
Pika board
FrenzyExists/Pika-Board-FilesPika Board v1.0 development files
- Size
- 85.7 × 118.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 67
- Pads
- 328
- Tracks, vias
- 365, 40
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Jun 2021
- Updated
- 5 Dec 2022
Overview
Pika board is an open-source printed circuit board by FrenzyExists, from the FrenzyExists/Pika-Board-Files repository on GitHub. It is a 2-layer board of 85.7 × 118.3 mm with 67 parts on 67 nets, routed with 365 tracks and 40 vias.
It is built around the ATMEGA32U4-AU, USBLC6-2SC6 and 1N4148W, with the PEC11R-4215F-S0024 and TLC-PSMD010/24 among its other parts. Its parts include 16 resistors, 15 switches, 12 diodes, 6 capacitors and 3 ICs. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
PEC11R-4215F-S0024
插件-30℃~+70℃ 10mA 24/24 5V Incremental Straight Two-phase output 插件 Rotary Encoders ROHSBournsRotary Encoders
TLC-PSMD010/24
0805-40℃~+85℃ 1.5s 100A 100mA 1Ω 24V 300mA 500mW 7.5Ω 0805 Resettable Fuses ROHSTLC ElectronicResettable Fuses
README
README.mdBoard files
All files containing development of the pika-board, a macro keyboard I've been doing from time to time
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6, R11, R12, R13, R14, R15, R16 |
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4, H5 |
| 4 | 2k | Resistor_SMD:R_0805_2012Metric | R1, R2, R7, R10 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1, NT2 |
| 2 | PEC11R-4215F-S0024 | digikey-footprints:Rotary_Encoder_Switched_PEC11R | S1, S2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 16MHZ | Crystal:Resonator_SMD-3Pin_7.2x3.0mm_CSTNE16M0VH3C000R0 | Y1 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | RESET_BTN | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW13 |
| 1 | SSD1306 | 1306:SSD1306_0.96_Oled | U3 |
| 1 | TLC-PSMD010/24 | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
The 62 most common of 67 parts.
Similar boards
- 2 layers304.8 × 95.3 mm
65 keyboard untitled
eightbitraptor/65_keyboard_untitled
My as yet unnamed 65% keyboard design
150 parts15 - 2 layers254 × 140 mm
- 2 layers285.5 × 95.4 mm
Minilite64
Wizmann/minilite64-keyboard
Minilite64 是一块 64 键、Kailh 热插拔、GH60 外形兼容的双层键盘 PCB。 REV B / 2026-08-B 已取消 RP2040 开发板、独立载板和 FFC/FPC；主控改为板载 ATmega32U4-AU，使用 USB-C、16 MHz 晶振、USB ESD 和 AVR ISP。
154 parts - 2 layers353.8 × 116.1 mm
- 2 layers314.3 × 123.8 mm
- 2 layers96.6 × 59.7 mm
Preheat controller
perja12/preheating_station_controller
Controller for the Youyue 946c preheating station.
53 parts1Apache-2.0 - 4 layers100 × 100 mm
QMKCM2
xeno3dev/QMKCM2
QMKCM2 is a QMK/ESP Powered Macropad inspired by the Work Louder Creator Micro 2
52 parts1
Questions
How big is the Pika board PCB?
It measures 85.7 × 118.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pika board use?
67 parts, built around the ATMEGA32U4-AU, USBLC6-2SC6, 1N4148W and PEC11R-4215F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pika board KiCad files?
From the FrenzyExists/Pika-Board-Files repository on GitHub, at the commit this page was made from: the board is pika-board.kicad_pcb and its schematic pika-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pika board design in my own project?
Its repository states no licence, so its author keeps all rights: ask FrenzyExists before reusing the design.