
Euclid36
sadekbaroudi/euclid36
At the time of creation, using Kicad 5.1.9 - This may not work with future versions

At the time of creation, using Kicad 5.1.9 - This may not work with future versions
Euclid36 is an open-source printed circuit board by sadekbaroudi, from the sadekbaroudi/euclid36 repository on GitHub. It is a 2-layer board of 247.7 × 127 mm with 130 parts on 118 nets, routed with 1,937 tracks and 241 vias.
It is built around the ATMEGA32U4-AU, USBLC6-2SC6 and 1N4148W, with the WS2812B among its other parts. Its parts include 36 diodes, 36 switches, 36 inductors, 9 capacitors and 8 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
First working prototype

First prototype

3d render

Layout

At the time of creation, using Kicad 5.1.9 - This may not work with future versions
| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 1N4148W | Diode_SMD:D_SOD-123 | D2, D10, D11, D12, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D25, D26 +20 |
| 36 | SW_PUSH | euclid36-libs:Kailh_socket_PG1350 | SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW25, SW26 +20 |
| 36 | WS2812B | euclid36-libs:SK6812-MINI-E | L1, L2, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23 +20 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 4.7n | Capacitor_SMD:C_0805_2012Metric | C6, C9 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 1 | 1.5K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | ATmega32U4-AU | euclid36-libs:ATMEGA32U4-AU | U2 |
| 1 | HRO-TYPE-C-31-M-12 | euclid36-libs:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | SW_PUSH | euclid36-libs:ResetSW_1side | RESET1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | XTAL | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |



eightbitraptor/65_keyboard_untitled
My as yet unnamed 65% keyboard design


Wizmann/minilite64-keyboard
Minilite64 是一块 64 键、Kailh 热插拔、GH60 外形兼容的双层键盘 PCB。 REV B / 2026-08-B 已取消 RP2040 开发板、独立载板和 FFC/FPC;主控改为板载 ATmega32U4-AU,使用 USB-C、16 MHz 晶振、USB ESD 和 AVR ISP。



damnitzhemanth-oss/Flight_Controller
Custom STM based flightcontroller designed from scratch.
It measures 247.7 × 127 mm and has 2 copper layers, 1.6 mm thick.
130 parts, built around the ATMEGA32U4-AU, USBLC6-2SC6, 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sadekbaroudi/euclid36 repository on GitHub, at the commit this page was made from: the board is choc/euclid36.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sadekbaroudi before reusing the design.