Skip to the content
2 layers25 × 23 mmTFI2CADT01, the printed circuit board in 3D

I2C address translator module, allows connection of multiple I2C devices with the same address to one bus.

Size
25 × 23 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
15
Pads
120
Tracks, vias
248, 49
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Jan 2022
Updated
26 Sep 2025

Overview

TFI2CADT01 is an open-source printed circuit board by ThunderFly-aerospace, from the ThunderFly-aerospace/TFI2CADT01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25 × 23 mm with 38 parts on 15 nets, routed with 248 tracks and 49 vias.

It is built around the MIC5504-3.3YM5, SM04B-GHS-TB and BZX585-B5V6,115-JSM. Its parts include 15 resistors, 6 connectors, 4 capacitors, 2 ICs and 2 diodes. It belongs with the sensors and measurement and interfaces and adapters boards of this library.

Main components

3

README

README.md

TFI2CADT01 - I²C address translator

TFI2CADT01 is an I2C device address changer. This function allows you to connect multiple I2C devices with the same address to one master device on the same bus.

TFI2CADT01A PCB design

That is a common problem in case multiple I2C sensors with the same address (or a limited number of addresses) need to be connected to one I2C master. The purpose of this module is to change the address with which the I2C master calls to the address of the target I2C (slave) device. The module is based on LTC4317 I2C address translator IC. The module is designed and optimized for use on Pixhawk-compatible drones, especially UAVs. The design of the module is compatible with the dronecode connectors standard.

Where to get it?

ThunderFly I2C address translator is commercially available from ThunderFly s.r.o., write an email to info@thunderfly.cz or shop at Tindie store.

Translation function

The called address of the slave device is translated by a logical operation XOR with the address bits configured in the TFI2CADT01 module. Each TFI2CADT01 port has a different default address. The address of each port can be changed independently by soldering solder jumpers JP1 and JP2.

NOTE: The TFI2CADT01 is not an I2C buffer, therefore the quality of input bits affects its function, and also corrupted data on input are propagated on the output. The address translator does XOR with the input address clocked in. To avoid related issues with bus data integrity we strongly recommend using ThunderFly's TFCABI2C cables which minimizes SDA/SCL crosstalks. In some cases, where the I2C network has a significant length or number of nodes the use of TFI2CEXT01, that is I2C extender with buffer function.

Configuration

The default address translation is listed in the following table.

PortSolder jumperXOR value (in hex)XOR value in binary form
1Disconnected (default)0x080b0001000
1Soldered0x0f0b0001111
2Disconnected (default)0x780b1111000
2Soldered0x7f0b1111111

The connectors on the top side and the unpopulated connector on the bottom side are identical. There is no address difference between them. That should be used to split the bus to other sensors.

Determining the new address of the I2C device

The new device address which should be called by the master could be calculated by doing XOR with the TFI2CADT01 port address and original device address. The result is the new device address. You can use an online calculator to do that. Another approach is determining the new address heuristically by use of the i2cdetect command or similar.

Example of usage

The TFI2CADT01 could be used with a wide variety of ThunderFly or Pixhawk I²C sensors, here are a few examples.

Tachometer (RPM) sensors

The TFI2CADT01 could be easily used for the connection of multiple TFRPM01 tachometer sensors, which is especially useful for multi-rotor airframes.

TFI2CADT01A using multiple TFRPM01 sensors

Redundant airspeed sensors

The TFI2CADT01 could also fix troubles with the connection of multiple TFSLOT01 airspeed sensors to one bus. It could be used even for other I2C-based airspeed sensors. That could increase the redundancy, in situations where a failure of the sensor is more probable than failure of the bus itself.

TFSLOT  airspeed sensor

Temperature and hygrometer sensors

For example the TFHT01 connected by use of TFI2CADT01 allows measuring of temperature and humidity by multiple airframe locations at once.

TFHT01

FAQ

How I can change the I2C addresses used in the Pixhawk to the ones translated by the TFI2CADT01?

The translated addresses might not be recognized by default in the PX4 (that is usually experienced in the case of the SDP3x sensor driver). One approach to solve that is to create a configuration file named config.txt on the SD card as is documented in the PX4 documentation. In this file, you can specify the start commands for the driver of the translated sensors.

Here's an example of the content of the /etc/config.txt on the SD card:

text
sdp3x_airspeed start -X -a <translated_address_a>
sdp3x_airspeed start -X -a <translated_address_b>

Replace <translated_address_a> and <translated_address_b> with the actual translated I2C addresses of your sensors. Addresses could be obtained by calculating XOR with the original address. Or it can be obtained with the i2cdetect command.

Parts

38
QtyValueFootprintReferences
610kResistor_SMD:R_0603_1608MetricR2, R3, R5, R6, R16, R17
6HOLEMlab_Mechanical:dira_3mmM1, M2, M3, M4, M5, M6
6SM04B-GHS-TBConnector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_HorizontalJ1, J2, J3, J4, J5, J6
31MResistor_SMD:R_0603_1608MetricR10, R12, R15
3887kResistor_SMD:R_0603_1608MetricR9, R13, R14
2100nFCapacitor_SMD:C_0603_1608MetricC2, C4
2180RResistor_SMD:R_0603_1608MetricR1, R8
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1, JP2
1-Resistor_SMD:R_0603_1608MetricR7
110uFCapacitor_SMD:C_0805_2012MetricC1
11uFCapacitor_SMD:C_0603_1608MetricC3
1BZX585-B5V6.115Diode_SMD:D_SOD-523D2
1LED GREENLED_SMD:LED_0603_1608MetricD1
1LOGOMLAB_LOGA:TF 10x4,7G1
1LTC4317Package_DFN_QFN:DFN-16-1EP_3x5mm_P0.5mm_EP1.66x4.4mmU2
1MIC5504-3.3YM5Package_TO_SOT_SMD:SOT-23-5U1

Similar boards

  • 2 layers30 × 15 mmTFHT01, the printed circuit board in 3D

    TFHT01

    ThunderFly-aerospace/TFHT01

    Airborne Humidity and Temperature sensor for UAVs.

    34 parts10GPL-3.0
  • 2 layers37.5 × 19 mmTFRPM01, the printed circuit board in 3D

    TFRPM01

    ThunderFly-aerospace/TFRPM01

    Revolutions per minute (RPM) meter for UAV, rotors, wheels and engines.

    28 parts9GPL-3.0
  • 2 layers25 × 15 mmTFI2CEXT01, the printed circuit board in 3D

    TFI2CEXT01

    ThunderFly-aerospace/TFI2CEXT01

    I2C bus wire length extension module. Enabling the use of more extensive bus interconnection.

    26 parts8GPL-3.0
  • 2 layers45 × 45 mmTFESC02, the printed circuit board in 3D

    TFESC02

    ThunderFly-aerospace/TFESC02

    ESC for BLDC motors for UAVs with I2C interface

    75 parts3GPL-3.0
  • 2 layers25 × 15 mmTFI2CADC01, the printed circuit board in 3D

    TFI2CADC01

    ThunderFly-aerospace/TFI2CADC01

    I2C Analog to digital converter for PixHawk

    20 parts1GPL-3.0
  • 2 layers50 × 50 mmTFGPSLITE02, the printed circuit board in 3D

    TFGPSLITE02

    ThunderFly-aerospace/TFGPSLITE02

    Compact GNSS Module for Lightweight UAVs

    27 partsGPL-3.0
  • 2 layers30 × 15 mmTFASPDIMU02, the printed circuit board in 3D

    TFASPDIMU02

    ThunderFly-aerospace/TFASPDIMU02

    I²C bus differential pressure sensor with IMU and Magnetometer.

    43 parts3GPL-3.0
  • 2 layers70.6 × 50.3 mmTFUNIPAYLOAD01, the printed circuit board in 3D

    TFUNIPAYLOAD01

    ThunderFly-aerospace/TFUNIPAYLOAD01

    Universal interface for TF-ATMON sensor payload.

    81 parts1GPL-3.0

Questions

How big is the TFI2CADT01 PCB?

It measures 25 × 23 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TFI2CADT01 use?

38 parts, built around the MIC5504-3.3YM5, SM04B-GHS-TB and BZX585-B5V6,115-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TFI2CADT01 KiCad files?

From the ThunderFly-aerospace/TFI2CADT01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/TFI2CADT01.kicad_pcb and its schematic hw/sch_pcb/TFI2CADT01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TFI2CADT01 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).