Smart led badge
zgeez/Pixel-Badge
Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

It's an extension for an ESP32 S3 that allows it to safely control 4 coreless DC motors and get data from an IMU and Barometer units. Meaning it's prepared to be used in a quadcopter. And a frame for the drone itself.
Esp extension is an open-source printed circuit board by Miky8745, from the Miky8745/HalfLife-Drone repository on GitHub. It is a 4-layer board of 80 × 60.6 mm with 66 parts on 62 nets, routed with 343 tracks and 43 vias.
It is built around the MS561101BA03-50, TPS63802DLAR and CC0603KRX7R9BB104, with the CL21A226MAQNNNE, AO3400A and SS34 among its other parts. Its parts include 17 resistors, 13 capacitors, 10 connectors, 8 diodes and 4 transistors. It belongs with the robots and motor control boards and the ESP32 boards of this library.
This is the project for week one and two of Half Life
It's an extension for an ESP32 S3 that allows it to safely control 4 coreless DC motors and get data from an IMU and Barometer units. Meaning it's prepared to be used in a quadcopter. And a frame for the drone itself.
Here's a nice render of the PCB.

And here's a nice render of the frame.

| Designator | Value | Footprint | Qty / board | Part # | Qty ordered* | Price | Source | Funded by |
|---|---|---|---|---|---|---|---|---|
| C1-C3, C8, C13 | 22u | 0805 | 5 | C45783 | 10 | $2.21 | JLCPCB Assembly | Grant |
| C4, C5, C7, C9-C11, C14 | 100n | 0603 | 7 | C14663 | 14 | $0.20 | JLCPCB Assembly | Grant |
| D1-D4 | SS34 | SMA | 4 | C8678 | 8 | $0.28 | JLCPCB Assembly | Grant |
| D5 | SMBJ5.0A | SMB | 1 | C19077558 | 5 | $0.24 | JLCPCB Assembly | Grant |
| D6 | B5819W | SOD-123 | 1 | C8598 | 2 | $0.06 | JLCPCB Assembly | Grant |
| D7, D8 | Red LED | 0603 | 2 | C2286 | 4 | $0.03 | JLCPCB Assembly | Grant |
| L1 | 0.47 µH | 2016 | 1 | C668312 | 5 | $0.89 | JLCPCB Assembly | Grant |
| Q1-Q4 | AO3400A | SOT-23 | 4 | C20917 | 8 | $0.71 | JLCPCB Assembly | Grant |
| R1, R2, R10, R11 | 100 | 0603 | 4 | C22775 | 8 | $0.02 | JLCPCB Assembly | Grant |
| R3, R4, R7, R13-R16 | 10k | 0603 | 7 | C25804 | 14 | $0.03 | JLCPCB Assembly | Grant |
| R5, R8, R9 | 100k | 0603 | 3 | C25803 | 6 | $0.02 | JLCPCB Assembly | Grant |
| R6 | 56k | 0603 | 1 | C23206 | 2 | $0.01 | JLCPCB Assembly | Grant |
| R17, R18 | 1k | 0603 | 2 | C21190 | 4 | $0.01 | JLCPCB Assembly | Grant |
| U2 | TPS63802DLAR | VSON-10 | 1 | C2845237 | 2 | $1.81 | JLCPCB Assembly | Grant |
| U3 | MS5611-01BA | LGA-8 | 1 | C15639 | 2 | $13.43 | JLCPCB Assembly | Grant |
| $19.94 |
* Some parts have a minimum order quantity amount (like the L1), that's why there's more ordered then I need| Designator | Value | Footprint | Qty / board | URL | Price | Source | Funded by |
|---|---|---|---|---|---|---|---|
| C6 | 220u 16V electrolytic | Radial D6.3 mm, 2.5 mm pitch | 1 | Radiokus | 3 Kč | Self-sourced | Me |
| SW1 | S103mini SPDT slide switch | 3 pin, 2.54 mm | 1 | Radiokus | 7 Kč | Self-sourced | Me |
| J5, J7, J10 | Female header 1x40, cut to 1x22 + 1x22 + 1x08 | 2.54 mm | 2 strips | Radiokus | 50 Kč | Self-sourced | Me |
| J8, J9 | Male header 1x11, cut to 1x04 + 1x06 | 2.54 mm | 1 strip | Radiokus | 8 Kč | Self-sourced | Me |
| Item | Price |
|---|---|
| PCB (5 pcs, 4 layer) | $8.00 |
| Assembly setup fee | $8.24 |
| Components | $19.94 |
| Extended components fee | $9.27 |
| SMT assembly | $0.38 |
| Confirm parts placement | $0.45 |
| Other order options | $2.41 |
| Shipping | $9.32 |
| Customs duties & taxes | $17.07 |
| Discount coupon | -$10.00 |
| Total | $65.08 |
Here's the BOM as a csv: BOM.csv
esp_extension/ - KiCad files (including production files under esp_extension/production)motor_test/ - A quick test with an AI generated script for driving the coreless motorframe/ - Files for week 2| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C7, C9, C10, C11, C14 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R7, R13, R14, R15, R16 |
| 5 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C8, C13 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11 |
| 4 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | SS34 | Diode_SMD:D_SMA | D1, D2, D3, D4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R8, R9 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R17, R18 |
| 2 | GY-521-Mount | MountingHole:MountingHole_3.2mm_M3 | H5, H6 |
| 2 | Red | LED_SMD:LED_0603_1608Metric | D7, D8 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | +BATT | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | 0.47 µH | drone:IND-SMD_L2.0-W1.6-1 | L1 |
| 1 | 220u 16V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C6 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D6 |
| 1 | BATTERY | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | J6 |
| 1 | ESP32-S3-LeftHeader | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J5 |
| 1 | ESP32-S3-RightHeader | Connector_PinSocket_2.54mm:PinSocket_1x22_P2.54mm_Vertical | J7 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | GPIO | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | MOTOR1 | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J1 |
| 1 | MOTOR2 | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J2 |
| 1 | MOTOR3 | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J3 |
| 1 | MOTOR4 | Connector_Wire:SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm | J4 |
| 1 | MPU6050 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J10 |
| 1 | MS5611-01BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U3 |
| 1 | SMBJ5.0A | Diode_SMD:D_SMB | D5 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | TPS63802DLAR | drone:VSON-10_L3.0-W2.0-P0.50-TL | U2 |
| 1 | VIN_3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
zgeez/Pixel-Badge
Wearable 32x32 LED badge with Zephyr firmware, BLE control, passive NFC, and a Flutter Android app, built around a custom nRF52840 PCB.

Excse/plant-watering-system
A completely selfmade smart watering system for plants of any kind integrated into HomeAssistant

aliaksei-lameyka/ENKU-Base-reader
Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator

HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

Miroeilola/vallox-rs485-controller
Replacement control panel for legacy Vallox SE ventilation units. Vallox DIGIT RS-485 protocol, bus-powered, ESP32, Home Assistant.

HeyPCB/kestrel-fc
Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.

enkhbold470/pd-brick
USB-C Power Delivery bench supply: STUSB4500 sink, LM5176 buck-boost, INA228 monitor, 1.2-22 V set over I2C by an ESP32-S3. 4-layer KiCad 10 board.
It measures 80 × 60.6 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the MS561101BA03-50, TPS63802DLAR, CC0603KRX7R9BB104 and CL21A226MAQNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Miky8745/HalfLife-Drone repository on GitHub, at the commit this page was made from: the board is esp_extension/esp_extension.kicad_pcb and its schematic esp_extension/esp_extension.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Miky8745 before reusing the design.