Skip to the content
12345678

MS561101BA03-50

TE ConnectivityExtended

-40℃~+85℃ 1.8V~3.6V 140nA 150pa 1Kpa~1.2bar 8.22ms I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes QFN-8(3x5) Pressure Sensors ROHS

Part id
te/MS561101BA03-50
Category
Pressure Sensors
Package
QFN-8(3x5)
Pins
8
In stock
5,061 at JLCPCB (C15639)
Used on
20 open-source boards

Overview

The MS561101BA03-50 is a pressure Sensor made by TE Connectivity in a QFN-8(3x5) package with 8 pins. -40℃~+85℃ 1.8V~3.6V 140nA 150pa 1Kpa~1.2bar 8.22ms I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes QFN-8(3x5) Pressure Sensors ROHS.

PCBKit's library has its footprint (EasyEDA_Cloud:SENSORS-SMD_MS5611-01BA03, from EasyEDA), ready for a KiCad board. 5,061 are in stock at JLCPCB (part C15639). 20 open-source boards in 18 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

12345678
EasyEDA_Cloud:SENSORS-SMD_MS5611-01BA03From EasyEDA

From the datasheet

8
Supply, least
1.8 V · VDD, recommended operating min · p. 3
Supply, most
3.6 V · VDD, recommended operating max · p. 3
Supply, absolute maximum
4 V · VDD, absolute max · p. 3
Works from
-40 °C · Operating temperature min · p. 3
Works up to
85 °C · Operating temperature max · p. 3
Takes working
12.5 µA · VDD, typical at 1 sample per second, OSR 4096 · p. 3
Takes at most
1.4 mA · VDD, typical peak during conversion · p. 3
Takes asleep
20 nA · VDD, typical standby at 25°C · p. 3

What it is and has

8
Altitude resolution
10 cm · p. 1
Conversion time
down to 1 ms · p. 1
Package
QFN, 5.0 x 3.0 x 1.0 mm3 · p. 1
ADC
24 bit ΔΣ · p. 1
Operating range
10 to 1200 mbar, -40 to +85 °C · p. 1
Interfaces
I2C and SPI up to 20 MHz · p. 1
Oscillator
Internal · p. 1
PROM
128-Bit, 4-bit CRC · p. 13

Around it

1
cap 100 nF
between VDD and GND; Ceramic; place as close as possible to the VDD pin. · p. 3

Specifications

22
ParameterConditionsAs printedPage
Supply voltage VDDmin -0.3 · max 4 V3
Storage temperature TSmin -40 · max 125 °C3
Overpressure Pmaxmax 6 bar3
Maximum Soldering Temperature Tmax40 sec maxmax 250 °C3
ESD ratingHuman Body Modelmin -4 · max 4 kV3
Latch upJEDEC standard No 78min -100 · max 100 mA3
Operating Supply voltage VDDmin 1.8 · typ 3 · max 3.6 V3
Operating Temperature Tmin -40 · typ 25 · max 85 °C3
Supply current (1 sample per sec.) IDDOSR 4096typ 12.5 uA3
Supply current (1 sample per sec.) IDDOSR 2048typ 6.3 uA3
Supply current (1 sample per sec.) IDDOSR 1024typ 3.2 uA3
Supply current (1 sample per sec.) IDDOSR 512typ 1.7 uA3
Supply current (1 sample per sec.) IDDOSR 256typ 0.9 uA3
Peak supply currentduring conversiontyp 1.4 mA3
Standby supply currentat 25°Ctyp 0.02 · max 0.14 uA3
VDD CapacitorFrom VDD to GNDmin 100 nF3
Output Wordtyp 24 bit3
Conversion time tcOSR 4096min 7.4 · typ 8.22 · max 9.04 ms3
Conversion time tcOSR 2048min 3.72 · typ 4.13 · max 4.54 ms3
Conversion time tcOSR 1024min 1.88 · typ 2.08 · max 2.28 ms3
Conversion time tcOSR 512min 0.95 · typ 1.06 · max 1.17 ms3
Conversion time tcOSR 256min 0.48 · typ 0.54 · max 0.6 ms3

Ordering codes, by the datasheet

1
MS561101BA03-50
QFN · Barometric Pressure Sensor with Thin Metal Cap; Tape and Reel · p. 22

Open-source boards using it

20See all 20
  • 2 layers136.2 × 85.9 mmBATDATUNIT01, the printed circuit board in 3D

    BATDATUNIT01

    mlab-modules/BATDATUNIT01

    Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.

    225 parts5GPL-3.0
  • 4 layers70 × 40 mmFlight comp srad-2026, the printed circuit board in 3D

    Flight comp srad-2026

    vito-pp/FlightComputer-SRAD-2026

    HW and SW documentation of a Student Researched And Developed (SRAD) flight computer in charge of telemetry for ITBA's rocketry team 2026

    86 parts3
  • 4 layers101.6 × 26.9 mmLiaka V3, the printed circuit board in 3D

    Liaka V3

    LulaUAV/Laika-Flight-Computer

    Kicad files for the Laika flight computer

    81 parts2
  • 4 layers91 × 30.1 mmStrelka Flight Computer, the printed circuit board in 3D

    Strelka Flight Computer

    LulaUAV/Strelka-Flight-Computer

    Strelka exists in the family of rocket dog flight computers. This flight computer is fully capable of deploying recovery events.

    170 parts2
  • 4 layers50 × 75 mmOneroiV1, the printed circuit board in 3D

    OneroiV1

    HomeOnDuna/Nyx-Flight-Computers

    Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.

    166 parts1
  • 4 layers38.4 × 82.8 mmHorizon, the printed circuit board in 3D

    Horizon

    ChladpavPy/Horizon

    Custom Rocket Flight Controller

    99 parts
  • 4 layers44.5 × 44.5 mmQUT Autopilot Pixracer, the printed circuit board in 3D

    QUT Autopilot Pixracer

    Heckus/QUT-OpenFCU

    The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.

    145 parts
  • 6 layers40 × 40 mmKestrel fc, the printed circuit board in 3D

    Kestrel fc

    HeyPCB/kestrel-fc

    Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.

    114 partsCERN-OHL-S-2.0

Questions

Is there a KiCad symbol and footprint for the MS561101BA03-50?

Yes. the footprint EasyEDA_Cloud:SENSORS-SMD_MS5611-01BA03, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MS561101BA03-50?

QFN-8(3x5), with 8 pins. Its footprint is drawn on this page.

Where is the MS561101BA03-50 datasheet?

TE Connectivity publishes it: the Datasheet link on this page opens it.

Where can I order the MS561101BA03-50?

JLCPCB lists it as part C15639, with 5,061 in stock; the sellers' links on this page open their listings.

Which open-source boards use the MS561101BA03-50?

20 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.