4 layers120 × 120 mm
4 layers100 × 70 mm
Inverter5000
MECSEM/electricalAll the electrical designs for MECSEM.
- Size
- 100 × 70 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 132
- Nets
- 119
- Pads
- 450
- Tracks, vias
- 801, 168
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 27 Apr 2026
Overview
Inverter5000 is an open-source printed circuit board by MECSEM, from the MECSEM/electrical repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 70 mm with 132 parts on 119 nets, routed with 801 tracks and 168 vias.
It is built around the RP2350B, TPS5430DDA and W25Q128JVSIQ, with the DD1600, H3V3U10B and H3V3N10B among its other parts. Its parts include 49 capacitors, 30 resistors, 17 diodes, 9 connectors and 8 ICs. It belongs with the RP2350 boards of this library.
Main components
12
RP2350B
QFN-80-EP(10x10)48 Power-on reset (POR)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Integrated LDO、True random number generator (TRNG)、Hardware ECC check、Independent watchdog (IWDG) QFN-80-EP(10x10) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
TPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHDD1600
插件-50℃~+150℃@(Tj) 150ns 16kV 20mA 40V@10mA 5uA@16000V Independent 插件 Switching Diodes ROHSDIOTECSwitching Diodes
H3V3U10B
DFN1006-2L-55℃~+125℃ 0.3pF 125W@8/20us 200nA 25V 3.3V 5A@8/20us 6V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)H3V3N10B
DFN1006-2L-55℃~+125℃ 10V 12.5pF 3.3V 50nA 6V 80W@8/20us 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
H5VHD3U
SOD-323-55℃~+125℃ 14V 185pF 200nA 25A@8/20us 350W@8/20us 5V 9V ESD IEC 61000-4-2、IEC 61000-4-5 Single-channel Unidirectional SOD-323 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)H5VS10BA
DFN1006-2L-55℃~+125℃ 10V 200nA 3.5A@8/20us 35W@8/20us 5.5pF 5V 8V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
ASE-12.000MHZ-ET
SMD3225-4P-20℃~+70℃ 12MHz 3.3V 7mA CMOS SMD3225-4P Crystal Oscillators ROHSAbraconCrystal Oscillators
SK84C
SMCSchottky DiodeshongjiachengSMCJ6.0A
SMC(DO-214AB)ESD And Surge Protection (TVS/ESD)hongjiacheng
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100nF | PCM_JLCPCB:C_0402 | C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C37, C38, C39 |
| 9 | 10uF | PCM_JLCPCB:C_1206 | C3, C4, C7, C9, C71, C73, C75, C84, C85 |
| 5 | 10uF | PCM_JLCPCB:C_0805 | C8, C11, C12, C34, C36 |
| 4 | DD1600 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | D3, D4, D6, D7 |
| 4 | H3V3U10B | PCM_JLCPCB:D_DFN1006-2L | D8, D9, D10, D11 |
| 3 | 100Ω | PCM_JLCPCB:R_0603 | R6, R14, R15 |
| 3 | 10k 0.1% | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R12 |
| 3 | 330pF | PCM_JLCPCB:C_0603 | C6, C16, C18 |
| 3 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H4 |
| 3 | ~ | PCM_JLCPCB:Hole_Tooling_JLCPCB | H5, H6, H7 |
| 2 | 10kΩ | PCM_JLCPCB:R_0402 | R1, R28 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C69, C70 |
| 2 | 18kΩ | PCM_JLCPCB:R_0402 | R2, R5 |
| 2 | 1kΩ | PCM_JLCPCB:R_0402 | R19, R20 |
| 2 | 22uF | PCM_JLCPCB:C_0805 | C13, C14 |
| 2 | 22Ω | PCM_JLCPCB:R_0402 | R21, R22 |
| 2 | 330u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 49.9Ω | PCM_JLCPCB:R_0402 | R17, R18 |
| 2 | 5.1kΩ | PCM_JLCPCB:R_0402 | R25, R26 |
| 2 | 50M | FYDPLIB:MHR0624SA506F70 | R9, R27 |
| 2 | 6.8n | FYDPLIB:C_Disc_D25.5mm_W10.0mm_P10.00mm | C15, C17 |
| 2 | H3V3N10B | PCM_JLCPCB:D_DFN1006-2L | D5, D14 |
| 2 | H5VHD3U | PCM_JLCPCB:D_SOD-323 | D45, D46 |
| 2 | H5VS10BA | PCM_JLCPCB:D_DFN1006-2L | D12, D13 |
| 2 | HV_IN | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm | J3, J4 |
| 1 | 0.01 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R7 |
| 1 | 100uF | PCM_JLCPCB:C_1206 | C19 |
| 1 | 10k HV | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R13 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C72 |
| 1 | 10Ω | PCM_JLCPCB:R_0402 | R23 |
| 1 | 120Ω | PCM_JLCPCB:R_0402 | R24 |
| 1 | 150u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C10 |
| 1 | 1nF | PCM_JLCPCB:C_0603 | C5 |
| 1 | 1uF | PCM_JLCPCB:C_0402 | C33 |
| 1 | 2.2uF | PCM_JLCPCB:C_0402 | C35 |
| 1 | 220uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C76 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C74 |
| 1 | 270 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | 2N7002 | PCM_JLCPCB:Q_SOT-23 | Q1 |
| 1 | 33u | Inductor_SMD:L_Bourns_SRP1245A | L1 |
| 1 | 33uH | FYDPLIB:L_Radial_D10.5mm_P4.00x5.00mm_Murata_1200RS | L2 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R45 |
| 1 | 470Ω | PCM_JLCPCB:R_0402 | R3 |
| 1 | 47Ω | PCM_JLCPCB:R_0402 | R16 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R44 |
| 1 | 6.2kV | FYDPLIB:GDT_Bourns_SA2 | GD1 |
| 1 | 6.3A | FYDPLIB:Wurth_Fuseholder_696108003002 | F1 |
| 1 | 82 | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R8 |
| 1 | ADS8866IDGSR | FYDPLIB:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL | U4 |
| 1 | ASE-12.000MHz | FYDPLIB:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J10 |
| 1 | DFU | FYDPLIB:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | INVERTER+ | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J1 |
| 1 | INVERTER- | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J2 |
| 1 | LD1117AS12TR | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | MS374-10CF-NS | FYDPLIB:MS374-10CF-NS | J5 |
| 1 | Micro-Fit 3.0 2x4 | FYDPLIB:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J29 |
| 1 | NVD5C486NT4G | Package_TO_SOT_SMD:TO-252-2 | Q4 |
| 1 | OPA2191IDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | OPA376xxDBV | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | OUTPUT | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | J9 |
| 1 | POLSEL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | REF5025AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RESTART | FYDPLIB:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | RP2350B | FYDPLIB:QFN-80_L10.0-W10.0-P0.40-TL-EP3.4 | U5 |
| 1 | S9012 2T1 200-350 | PCM_JLCPCB:Q_SOT-23 | Q3 |
| 1 | S9013 J3 200-350 | PCM_JLCPCB:Q_SOT-23 | Q2 |
| 1 | SK84C | PCM_JLCPCB:D_SMC | D1 |
| 1 | SMCJ6.0A | PCM_JLCPCB:D_SMC | D2 |
| 1 | SS54 | Diode_SMD:D_SMA | D44 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U35 |
| 1 | USB4085-GF-A | FYDPLIB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J11 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U7 |
| 1 | ~ | PCM_JLCPCB:Part_Num_JLCPCB | PN1 |
Questions
How big is the Inverter5000 PCB?
It measures 100 × 70 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Inverter5000 use?
132 parts, built around the RP2350B, TPS5430DDA, W25Q128JVSIQ and DD1600. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inverter5000 KiCad files?
From the MECSEM/electrical repository on GitHub, at the commit this page was made from: the board is HVDC/Inverter5000/Inverter5000.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inverter5000 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from MECSEM/electrical
12- 4 layers100 × 100 mm
- 4 layers100 × 100 mm
- 4 layers72 × 50 mm
- 4 layers95 × 74 mm
- 4 layers70 × 50 mm
- 4 layers78 × 53 mm
- 4 layers80 × 50 mm
- 4 layers100 × 65 mm
- 4 layers100 × 50 mm
- 4 layers100 × 50 mm
- 4 layers37.5 × 22 mm
Similar boards
- 4 layers30 × 30 mm
003RoboticsStartStop - Dev
Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
38 parts - 2 layers249 × 69.5 mm
Helsinki LED Train Map
CDFER/helsinki-live-train-map
A physical, real-time LED map of the Auckland train network, powered by an ESP32-C3 microcontroller. Train movements are displayed using addressable RGB LEDs, with live data fetched over Wi-Fi.
441 partsMIT - 4 layers85.7 × 54 mm
- 4 layers162 × 87 mm
- 4 layers93.5 × 81 mm
- 4 layers86 × 34 mm
Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 2 layers110 × 220 mm
Fin ltm
HekiNav/finland-live-train-map
Some of the LEDs are missing because they were removed after making the initial layout
423 parts7MIT - 4 layers92.5 × 70 mm
Clock
stevel1212-droid/stm32-rtc-climate-controller
Kicad project of an STM32-based board climate controller utilizing an RTC module for time-scheduled environmental reading of temperature/humidity with SHT30 sensor and optional small relay for control.
69 partsMIT