

Inverter200
All the electrical designs for MECSEM.
- Size
- 100 × 65 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 97
- Nets
- 52
- Pads
- 286
- Tracks, vias
- 543, 49
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Apr 2026
- Updated
- 27 Apr 2026
Overview
Inverter200 is an open-source printed circuit board by MECSEM, from the MECSEM/electrical repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 65 mm with 97 parts on 52 nets, routed with 543 tracks and 49 vias.
It is built around the UCC28C55D, H5VUD5U and AO3400A, with the BC847C, BSS84 and KT05-1A-40L-THT among its other parts. Its parts include 25 resistors, 22 capacitors, 14 diodes, 8 connectors and 5 transistors. It belongs with the RP2350 boards of this library.
Main components
8UCC28C55D
SOIC-8-40℃~+125℃@(TJ) 1 1.3mA 1A 52kHz 7V~28V Adjustable Built-in Cycle-by-cycle current limiting、Frequency synchronization Flyback No SOIC-8 AC-DC Controllers and Regulators ROHSTexas InstrumentsDC-DC ConvertersH5VUD5U
SOD-523-55℃~+125℃ 0.8pF 15V 200nA 5A@8/20us 5V 75W@8/20us 9V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBC847C
SOT-23-55℃~+150℃ 1 NPN 100MHz 100mA 100nA 200mW 420 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsKT05-1A-40L-THT
DIP,10.2x30.2mm-40℃~+100℃ 1 Set Normally Open: 1A (SPST NO) 1A 1kV@AC、1kV@DC 5V DIP,10.2x30.2mm Reed Relays ROHSSTANDEXMEDERReed RelaysSMAJ200A
DO-214AC(SMA)ESD And Surge Protection (TVS/ESD)hongjiachengSTN3N40K3
SOT-223-55℃~+150℃ 1 N-channel 1.8A 11nC@10V 165pF 17pF 3.3W 3.4Ω@10V 3pF 4.5V 400V N-Channel SOT-223 MOSFETs ROHSSTMicroelectronicsMOSFETs
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1nF | PCM_JLCPCB:C_1206 | C9, C11, C19, C20, C21, C24 |
| 5 | RSFGL RVG | Diode_SMD:D_SMF | D1, D2, D3, D4, D5 |
| 5 | ~ | PCM_JLCPCB:FB_0603 | FB2, FB3, FB4, FB5, FB6 |
| 4 | 10kΩ | PCM_JLCPCB:R_0402 | R4, R23, R34, R35 |
| 4 | 2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R8, R9, R10, R11 |
| 4 | ADS12B3-ASARH | PCM_JLCPCB:D_SMBF | D8, D9, D10, D11 |
| 4 | H5VUD5U | PCM_JLCPCB:D_SOD-523 | D7, D12, D13, D14 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H4, H5, H6, H7 |
| 4 | Micro-Fit 3.0 1x2 | FYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J1, J5, J6, J7 |
| 3 | 100nF | PCM_JLCPCB:C_0805 | C7, C8, C18 |
| 3 | 10uF | PCM_JLCPCB:C_1206 | C15, C16, C17 |
| 3 | ~ | PCM_JLCPCB:Hole_Tooling_JLCPCB | H1, H2, H3 |
| 2 | 100kΩ | PCM_JLCPCB:R_1206 | R16, R17 |
| 2 | 10Ω | PCM_JLCPCB:R_1206 | R1, R2 |
| 2 | 22kΩ | PCM_JLCPCB:R_0402 | R12, R13 |
| 2 | 470n | FYDPLIB:WE_CP_Rect_L15.0mm_W10.0mm_P12.50mm | C4, C5 |
| 2 | 6.8k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R20, R21 |
| 2 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q3, Q6 |
| 2 | Micro-Fit 3.0 2x4 | FYDPLIB:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J3, J4 |
| 2 | POLSEL | FYDPLIB:SolderJumper-3_HV_Open | JP3, JP4 |
| 1 | 100nF | PCM_JLCPCB:C_0402 | C14 |
| 1 | 100pF | PCM_JLCPCB:C_0805 | C10 |
| 1 | 100Ω | PCM_JLCPCB:R_1206 | R22 |
| 1 | 10k TRIM | Potentiometer_THT:Potentiometer_Bourns_3006P_Horizontal | RV1 |
| 1 | 10kΩ | PCM_JLCPCB:R_0805 | R15 |
| 1 | 10nF | PCM_JLCPCB:C_1206 | C13 |
| 1 | 10pF | PCM_JLCPCB:C_0603 | C3 |
| 1 | 12kΩ | PCM_JLCPCB:R_0603 | R18 |
| 1 | 1nF | PCM_JLCPCB:C_0402 | C1 |
| 1 | 2.2u | FYDPLIB:WE_CP_Rect_L18.0mm_W10.0mm_P15.00mm | C12 |
| 1 | 220n | Capacitor_SMD:C_1812_4532Metric | C6 |
| 1 | 220Ω | PCM_JLCPCB:R_0805 | R5 |
| 1 | 250m | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 330pF | PCM_JLCPCB:C_0402 | C2 |
| 1 | 3kΩ | PCM_JLCPCB:R_0603 | R19 |
| 1 | 4.7kΩ | PCM_JLCPCB:R_0805 | R7 |
| 1 | 470Ω | PCM_JLCPCB:R_0805 | R3 |
| 1 | 47Ω | PCM_JLCPCB:R_0603 | R14 |
| 1 | 8.2kΩ | PCM_JLCPCB:R_0805 | R6 |
| 1 | BC847C | PCM_JLCPCB:Q_SOT-23 | Q2 |
| 1 | BSS84 | PCM_JLCPCB:Q_SOT-23 | Q5 |
| 1 | Custom Transformer | FYDPLIB:TRANSFORMER_ETD_54x28x19 | T1 |
| 1 | KT05-1A-40L-THT | FYDPLIB:KT12-1A-40L-THT | K1 |
| 1 | Micro-Fit 3.0 2x2 | FYDPLIB:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J8 |
| 1 | Micro-Fit 3.0 3 Pin | FYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J2 |
| 1 | OPA2197xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | POLSEL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SMAJ200A | PCM_JLCPCB:D_SMA | D6 |
| 1 | STN3N40K3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | UCC28C55 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | ~ | PCM_JLCPCB:Part_Num_JLCPCB | PN1 |
| 1 | ~ | PCM_JLCPCB:FB_0805 | FB1 |
More from MECSEM/electrical
12- 4 layers120 × 120 mm

- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

- 4 layers72 × 50 mm

- 4 layers100 × 70 mm

- 4 layers95 × 74 mm

- 4 layers70 × 50 mm

- 4 layers78 × 53 mm

- 4 layers80 × 50 mm

- 4 layers100 × 50 mm

- 4 layers100 × 50 mm

- 4 layers37.5 × 22 mm

Similar boards
- 4 layers36 × 65 mm

Uwb beacon
dan-stefanov/locatof-hw
Open-source localization project based on UWB Time-of-Flight ranging
111 partsCERN-OHL-P-2.0 - 2 layers225.7 × 84.2 mm

- 4 layers70 × 34 mm

Dual converter boost converter module V1.0
Rack-Robotics/Powercore-V3
electrical-discharge power supply, open-source
54 parts85 - 4 layers70 × 34 mm

Dual converter boost converter module V1.0
danielkm-ee/EPL-WPS
power supply for the EPL wire EDM
39 parts - 4 layers50 × 59 mm

- 2 layers99.8 × 99.8 mm

The claw if pizza planet was broke
askiiart/the-claw-expansion-board
expansion board for the claw
48 parts1 - 4 layers213.4 × 138.9 mm

Capstone Project Smart glasses for the visually impaired
heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired
The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.
197 parts1 - 2 layers100 × 100 mm

Questions
How big is the Inverter200 PCB?
It measures 100 × 65 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Inverter200 use?
97 parts, built around the UCC28C55D, H5VUD5U, AO3400A and BC847C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Inverter200 KiCad files?
From the MECSEM/electrical repository on GitHub, at the commit this page was made from: the board is HVDC/Inverter200/Inverter200.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Inverter200 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).