Skip to the content
PCBKitNew board
4 layers70 × 50 mmBeam Alignment Controller, the printed circuit board in 3D

Beam Alignment Controller

MECSEM/electrical

All the electrical designs for MECSEM.

Size
70 × 50 mm
Copper layers
4
Thickness
1.61 mm
Parts
111
Nets
118
Pads
424
Tracks, vias
756, 118
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Apr 2026
Updated
27 Apr 2026

Overview

Beam Alignment Controller is an open-source printed circuit board by MECSEM, from the MECSEM/electrical repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 70 × 50 mm with 111 parts on 118 nets, routed with 756 tracks and 118 vias.

It is built around the RP2350B, TPS5430DDA and W25Q128JVSIQ, with the H3V3U10B, BD911 and H3V3HD3B among its other parts. Its parts include 41 capacitors, 27 resistors, 12 diodes, 8 ICs and 5 transistors. It belongs with the RP2350 boards of this library.

Main components

11

Parts

111
QtyValueFootprintReferences
19100nFPCM_JLCPCB:C_0402C3, C10, C12, C37, C38, C39, C40, C41, C42, C43, C44, C45, C46, C47, C48, C49 +3
4100pFPCM_JLCPCB:C_0603C1, C6, C8, C13
41kΩPCM_JLCPCB:R_0402R3, R10, R33, R34
4H3V3U10BPCM_JLCPCB:D_DFN1006-2LD10, D11, D12, D13
4M3MountingHole:MountingHole_3.2mm_M3_Pad_ViaH4, H5, H6, H7
310uFPCM_JLCPCB:C_1206C31, C32, C33
32N7002PCM_JLCPCB:Q_SOT-23Q2, Q4, Q5
3~PCM_JLCPCB:Hole_Tooling_JLCPCBH1, H2, H3
21Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR5, R12
2100uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7, C14
210kΩPCM_JLCPCB:R_0402R7, R14
210kΩPCM_JLCPCB:R_0603R4, R11
210uFCapacitor_SMD:C_1206_3216MetricC29, C30
210uFPCM_JLCPCB:C_0603C4, C11
210uFPCM_JLCPCB:C_0805C51, C53
2220nFPCM_JLCPCB:C_0402C2, C9
222ΩPCM_JLCPCB:R_0402R35, R36
24.7kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R9
242.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R8
249.9ΩPCM_JLCPCB:R_0402R31, R32
25.1kΩPCM_JLCPCB:R_0402R39, R40
2511mResistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_HorizontalR6, R13
2BD911Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q3
2DAC80501MDGSRFYDPLIB:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BLU1, U3
2G6K-2P-Y DC24Relay_THT:Relay_DPDT_Omron_G6K-2P-YK1, K2
2H3V3HD3BPCM_JLCPCB:D_SOD-323D2, D4
2H3V3HD3UPCM_JLCPCB:D_SOD-323D1, D3
2H5VS10BAPCM_JLCPCB:D_DFN1006-2LD14, D15
2OPA376xxDBVPackage_TO_SOT_SMD:SOT-23-5U2, U4
110nFCapacitor_SMD:C_0805_2012MetricC34
110ΩPCM_JLCPCB:R_0402R37
1120ΩPCM_JLCPCB:R_0402R38
1150ΩPCM_JLCPCB:R_0603R25
11uFPCM_JLCPCB:C_0402C50
12.2uFPCM_JLCPCB:C_0402C52
1220uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC36
122uFCapacitor_SMD:C_1206_3216MetricC35
124V INFYDPLIB:Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_HorizontalJ3
133uHFYDPLIB:L_Radial_D10.5mm_P4.00x5.00mm_Murata_1200RSL1
13kResistor_SMD:R_0603_1608MetricR30
15.1kResistor_SMD:R_0603_1608MetricR29
1ASE-12.000MHzFYDPLIB:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mmY1
1DEBUGConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1DFUFYDPLIB:SW_Push_1P1T_XKB_TS-1187ASW1
1GreenPCM_JLCPCB:D_0805D5
1LD1117AS12TRPackage_TO_SOT_SMD:SOT-223-3_TabPin2U11
1OUTFYDPLIB:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_HorizontalJ1
1RESTARTFYDPLIB:SW_Push_1P1T_XKB_TS-1187ASW2
1RP2350BFYDPLIB:QFN-80_L10.0-W10.0-P0.40-TL-EP3.4U10
1SS54Diode_SMD:D_SMAD9
1TPS5430DDAPackage_SO:TI_SO-PowerPAD-8_ThermalViasU9
1USB4085-GF-AFYDPLIB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ5
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU12
1~PCM_JLCPCB:Part_Num_JLCPCBPN1

Questions

How big is the Beam Alignment Controller PCB?

It measures 70 × 50 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Beam Alignment Controller use?

111 parts, built around the RP2350B, TPS5430DDA, W25Q128JVSIQ and H3V3U10B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Beam Alignment Controller KiCad files?

From the MECSEM/electrical repository on GitHub, at the commit this page was made from: the board is LV-Misc/Beam Alignment Controller/Beam Alignment Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Beam Alignment Controller design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

More from MECSEM/electrical

12
  • 4 layers120 × 120 mmHVDC test board, the printed circuit board in 3D

    HVDC test board

    MECSEM/electrical

    All the electrical designs for MECSEM.

    356 partsGPL-3.0
  • 4 layers100 × 100 mmHV Controller, the printed circuit board in 3D

    HV Controller

    MECSEM/electrical

    All the electrical designs for MECSEM.

    283 partsGPL-3.0
  • 4 layers100 × 100 mmLV Controller, the printed circuit board in 3D

    LV Controller

    MECSEM/electrical

    All the electrical designs for MECSEM.

    208 partsGPL-3.0
  • 4 layers72 × 50 mmSource Controller, the printed circuit board in 3D

    Source Controller

    MECSEM/electrical

    All the electrical designs for MECSEM.

    147 partsGPL-3.0
  • 4 layers100 × 70 mmInverter5000, the printed circuit board in 3D

    Inverter5000

    MECSEM/electrical

    All the electrical designs for MECSEM.

    132 partsGPL-3.0
  • 4 layers95 × 74 mmPicoPSU, the printed circuit board in 3D

    PicoPSU

    MECSEM/electrical

    All the electrical designs for MECSEM.

    129 partsGPL-3.0
  • 4 layers78 × 53 mmAmplifier200, the printed circuit board in 3D

    Amplifier200

    MECSEM/electrical

    All the electrical designs for MECSEM.

    101 partsGPL-3.0
  • 4 layers80 × 50 mmBeam Deflector Board, the printed circuit board in 3D

    Beam Deflector Board

    MECSEM/electrical

    All the electrical designs for MECSEM.

    100 partsGPL-3.0
  • 4 layers100 × 65 mmInverter200, the printed circuit board in 3D

    Inverter200

    MECSEM/electrical

    All the electrical designs for MECSEM.

    97 partsGPL-3.0
  • 4 layers100 × 50 mmSketchverter5000, the printed circuit board in 3D

    Sketchverter5000

    MECSEM/electrical

    All the electrical designs for MECSEM.

    68 partsGPL-3.0
  • 4 layers100 × 50 mmTransformer Driver, the printed circuit board in 3D

    Transformer Driver

    MECSEM/electrical

    All the electrical designs for MECSEM.

    61 partsGPL-3.0
  • 4 layers37.5 × 22 mmAmplifier5000, the printed circuit board in 3D

    Amplifier5000

    MECSEM/electrical

    All the electrical designs for MECSEM.

    48 partsGPL-3.0

Similar boards

  • 2 layers160 × 110 mmAcquedotto test v4 finale, the printed circuit board in 3D

    Acquedotto test v4 finale

    igorilla666/water-controller

    Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.

    139 parts1CERN-OHL-S-2.0
  • 2 layers249 × 69.5 mmHelsinki LED Train Map, the printed circuit board in 3D

    Helsinki LED Train Map

    CDFER/helsinki-live-train-map

    A physical, real-time LED map of the Auckland train network, powered by an ESP32-C3 microcontroller. Train movements are displayed using addressable RGB LEDs, with live data fetched over Wi-Fi.

    441 partsMIT
  • 4 layers85.7 × 54 mmLatchup badge, the printed circuit board in 3D

    Latchup badge

    mwelling/latchup-badge

    ICE40 Badge for Latch-Up

    59 parts5
  • 4 layers162 × 87 mmRP2040 Eval Board, the printed circuit board in 3D

    RP2040 Eval Board

    MicroType-Engineering/YouTube_Projects

    321 partsMIT
  • 4 layers93.5 × 81 mmUM Controller, the printed circuit board in 3D

    UM Controller

    Aptustech/Micromanipulator_uM_NG

    Next generation Micromanipulator controller

    173 parts2
  • 4 layers86 × 34 mmBsl drv v1, the printed circuit board in 3D

    Bsl drv v1

    jackw01/scanlight

    A better light source for scanning color negative film

    157 parts397CERN-OHL-W-2.0
  • 2 layers110 × 220 mmFin ltm, the printed circuit board in 3D

    Fin ltm

    HekiNav/finland-live-train-map

    Some of the LEDs are missing because they were removed after making the initial layout

    423 parts7MIT
  • 2 layers74.2 × 87.1 mmNc1, the printed circuit board in 3D

    Nc1

    nietamten/VoltageConverterForSolar

    NCP1034 buck with regulated output voltage, output current, minimum input voltage

    76 parts4