2 layers215.2 × 163.6 mm
4 layers140.8 × 28.5 mm
LED Module E copper
lenaschimmel/bestelampe18Die beste Lampe
- Size
- 140.8 × 28.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 16
- Pads
- 69
- Tracks, vias
- 26, 0
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2023
- Updated
- 19 Oct 2025
Overview
LED Module E copper is an open-source printed circuit board by lenaschimmel, from the lenaschimmel/bestelampe repository on GitHub. It is a 4-layer board of 140.8 × 28.5 mm with 40 parts on 16 nets, routed with 26 tracks and 0 vias.
It is built around the TMP1075DSGR, XEGAAM-H2-0000-000-000000Q5001 and XEGAAM-H2-0000-000-000000R4001, with the XEGAPA-H0-0000-000-000000T3001, XEGAPB-H0-0000-000-000000Q5001 and XEGAPL-H0-0000-000-000000V3001 among its other parts. Its parts include 18 switches, 10 diodes, 1 capacitor and 1 IC. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
10
TMP1075DSGR
WSON-8-EP(2x2)-55℃~+125℃ 1.7V~5.5V 12bit 4uA 7ms Factory temperature calibration、Temperature threshold monitoring I2C、SMBus ±1℃ WSON-8-EP(2x2) Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
XEGAAM-H2-0000-000-000000Q5001
SMD-3P120° 2.4V 590nm Amber Discrete Diode SMD-3P LED Indication - Discrete ROHSCree LEDLED Indication - DiscreteXEGAAM-H2-0000-000-000000R4001
-- LED Indication - Discrete ROHSCree LEDLED Indication - DiscreteXEGAPA-H0-0000-000-000000T3001
SMD-3SMD-3 Abolished Device ROHSWolfspeedUncategorisedXEGAPB-H0-0000-000-000000Q5001
SMD-3P125° 1A 3.05V Blue SMD-3P LED Indication - Discrete ROHSCree LEDLED Indication - DiscreteXEGAPL-H0-0000-000-000000V3001
SMD,2.0X1.6mmSMD,2.0x1.6mm Abolished Device ROHSWolfspeedUncategorisedXEGAPO-H0-0000-000-000000S3001
SMD-3P125° 1A 3.05V SMD-3P LED Indication - Discrete ROHSCree LEDLED Indication - DiscreteXEGAWT-H2-0000-000-00000UT227H
SMD-3P125° 1A 3V White SMD-3P LED Indication - Discrete ROHSCree LEDLED Indication - DiscreteXEGAWT-H2-0000-000-00000UT330G
SMD-3PLED Indication - DiscreteCree LEDXEGAWT-H2-0000-000-00000UT650G
SMDLED Indication - DiscreteCree LED
README
hardware/ledmodule/LED_Module_D/README.mdLED Module D
DO NOT USE
This module is flawed in countless ways, and I really recommend to not use it in any way. Not as it is, not as a basis for modification.
I just uploaded it for transparency, because I talk a lot about it on the Progress page. You can read about it's problems there.
Goal
This board should make it possible to have up to 10 high power LEDs with different colors aranged in a slim (2mm) and short (20mm) line. A TLC59711 is used to generate the 10 PWM signals, but it is not driving the LEDs directly. Instead, a line driver, MOSFETs and series resistors are used to power the LEDs without the complexities of a constant current drive.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Conn_01x01 | TestPoint:TestPoint_Pad_D1.5mm | K1, K2, K3, K4, K5, K6, K7, K10, K11, K12, K13, K14, K15, K16, K17, K18 +2 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6 |
| 2 | MountingHole_Pad | TestPoint:TestPoint_Pad_D2.5mm | H7, H8 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | LOGO | LOGO | G*** |
| 1 | TMP1075DSGR | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U1 |
| 1 | XEGAAM-H2-0000-000-000000Q5001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D12 |
| 1 | XEGAAM-H2-0000-000-000000R4001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D2 |
| 1 | XEGAPA-H0-0000-000-000000T3001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D5 |
| 1 | XEGAPB-H0-0000-000-000000Q5001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D3 |
| 1 | XEGAPL-H0-0000-000-000000V3001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D6 |
| 1 | XEGAPO-H0-0000-000-000000S3001 | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D8 |
| 1 | XEGAWT-H2-0000-000-00000UT122G | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D1 |
| 1 | XEGAWT-H2-0000-000-00000UT227H | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D11 |
| 1 | XEGAWT-H2-0000-000-00000UT330G | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D7 |
| 1 | XEGAWT-H2-0000-000-00000UT650G | Cree XLAMP XE-G LED XEGAVT-H0:XEGAVTH_PCBA | D4 |
The 39 most common of 40 parts.
More from lenaschimmel/bestelampe
12- 2 layers214.6 × 70.5 mm
- 4 layers51.7 × 29.5 mm
- 4 layers140.8 × 26 mm
- 4 layers70 × 79.1 mm
- 2 layers83.8 × 61 mm
- 4 layers21.1 × 59.9 mm
- 4 layers56.5 × 124 mm
- 2 layers110 × 80.4 mm
- 2 layers65.5 × 58.4 mm
- 2 layers22.9 × 28.4 mm
- 6 layers
Similar boards
- 2 layers100 × 75 mm
Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 4 layers102 × 70 mm
- 4 layers24.4 × 24.4 mm
OSO SWAT C1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
40 parts2.1k - 4 layers70 × 56 mm
Pi adapter hc
hzeller/spixels
Spixels - 16-SPI LED Raspberry Pi adapter with library (SPI - Pixels).
40 parts41LGPL-3.0 - 4 layers76.7 × 76.7 mm
- 4 layers30 × 30 mm
CamIO
intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board
40 parts20 - 4 layers15 × 11 mm
- 4 layers65 × 56 mm
Pi transceiver hat
M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi
40 parts15
Questions
How big is the LED Module E copper PCB?
It measures 140.8 × 28.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LED Module E copper use?
40 parts, built around the TMP1075DSGR, XEGAAM-H2-0000-000-000000Q5001, XEGAAM-H2-0000-000-000000R4001 and XEGAPA-H0-0000-000-000000T3001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Module E copper KiCad files?
From the lenaschimmel/bestelampe repository on GitHub, at the commit this page was made from: the board is hardware/abl/LED_Module_E/LED_Module_E_copper.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Module E copper design in my own project?
Its repository states no licence, so its author keeps all rights: ask lenaschimmel before reusing the design.